BIAA 33 F X H Y - Fridge INDESIT - Free user manual and instructions

USER MANUAL BIAA 33 F X H Y INDESIT

Operating Instructions, 1

Description of the appliance, 7

Description of the appliance, 13

Reversible doors, 19

Start-up and use, 25

Maintenance and care, 25

Precautions and tips, 26

Operating Instructions

Before calling for Assistance:

Check if the malfunction can be solved on your own (

• If after all the checks, the appliance still does not operate or the

problem persists, call the nearest Service Centre

• type of malfunction

• appliance model (Mod.)

• serial number (S/N)

This information can be found on the data plate located on the

bottom left side of the refrigerator compartment.

Never call on unauthorized technicians and always refuse

spare parts which are not originals.

Description of the appliance

1. ON/OFF The entire product (both the refrigerator and freezer

may be switched on by pressing this button for 2 seconds.Last set

values are display at screens. Press this button till the switching off

of the product.A signal sound will inform the switching off of the

2. REFRIGERATOR and temperature adjustment

Used to modify the temperature setting of the refrigerator;

confirmation corresponding to the selected temperature appears

3. Refrigerator display

Shows the settled temperature for the refrigerator compartment.

4. FREEZER and temperature adjustment

Used to modify the temperature setting of the freezer; confirmation

corresponding to the selected temperature appears on the

Shows the set temperature for the freezer compartment.

6. SUPER COOL Enable or disable the SUPER COOL function

(rapid cooling). and ‘SC’ appears on the

refrigerator display.

7. SUPER FREEZE Enable or disable the SUPER FREEZE function

(rapid freezing). and ‘SF’ appears on the freezer

Description of the appliance

The instructions contained in this manual are applicable to different

model refrigerators. The diagrams may not directly represent the

appliance purchased. For more complex features, consult the

2 STORAGE compartment

4 FREEZER and STORAGE compartment

5 FRUIT and VEGETABLE bin *

6 FRESH BOX for MEAT and CHEESE *

9 LAMP (see Maintenance).

10 Removable multipurpose SHELVES *

* Varies by number and/or position, available only on certain

If it is necessary to change the direction in which the doors open,

please contact the Technical Assistance Centre.

Réversibilité des portes

! Before placing your new appliance into operation please read

these operating instructions carefully. They contain important

information for safe use, for installation and for care of the

! Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to operate

correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm between

the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the appliance

and the wall behind it, fit the spacers supplied in the installation

kit, following the instructions provided.

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to the

electricity mains. Before inserting the plug into the electrical socket

ensure the following:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the appliance,

which is indicated on the data plate located on the bottom left

side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values indicated

on the data plate located on the bottom left side (e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised

technician to replace it (see Assistance). Do not use extension

cords or multiple sockets.

! Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by authorised

technicians only (see Assistance).

The manufacturer declines any liability should these The manufacturer declines any liability should these

The manufacturer declines any liability should these The manufacturer declines any liability should these

The manufacturer declines any liability should these

safety measures not be observed.safety measures not be observed.

safety measures not be observed.safety measures not be observed.

safety measures not be observed.

Starting the appliance

! After transportation of the appliance, carefully place it in an upright

position and wait at least 3 hours before connecting it to the

electricity mains, to make sure it operates as it should.

• Clean the inside of the refrigerator well using warm water and

bicarbonate of soda before placing food inside it.

• The appliance comes with a motor protection control system

which makes the compressor start approximately 8 minutes

after being switched on. The compressor also starts each time

the power supply is cut off whether voluntarily or involuntarily

When the product is switched on the freezer compartment is set to

its default value of -18°C. We recommend that the SUPER FREEZE

function is set in order to accelerate the cooling process of the

compartment; when the inside of the compartment has reached its

optimal temperature the function will be deactivated and the food

may be placed inside.

Refrigerator Compartment

When the appliance is switched on the refrigerator compartment is

set to its default value of +5°C. We recommend that the SUPER COOL function is set in order to accelerate the cooling process of

the compartment. After a few hours it will be cool enough for food to

Navigating the display

Setting the temperatures:

If the product is switched on, the refrigerator and freezer

compartment displays will indicate the temperature values set at

that moment. To change them, simply press the - and + buttons

corresponding to the compartment for which you wish to change

the set temperature. More specifically, each time the buttons are

pressed, the temperature increases or decreases and the level of

cold generated inside the compartment is adjusted accordingly.

The temperature values that may be selected for the refrigerator

compartment are +8°C, +7°C, +6°C, +5°C, +4°C, +3°C and +2°C,

while the values that may be set for the freezer are -18°C, -19°C, -

20°C, -21°C, -22°C, -24°C and -26°C. If SUPER COOL function is

activated, Fridge temperature cannot be modified. If SUPER FREEZE functions is activated, Freezer temperature cannot be

The No Frost system circulates cold air continuously to collect

humidity and prevent ice and frost formation. The system maintains

an optimal humidity level in the compartment, preserving the

original quality of the food, preventing the food from sticking

together and making defrosting a thing of the past. Do not block

the aeration cells by placing food or containers in direct contact

with the refrigerating back panel. Close bottles and wrap food

Using the refrigerator to its full potential

• Adjust the temperature using the display.

• Activate the SUPER COOL function to lower the temperature

quickly, for example, when you place a large number of new

food items inside a fridge and the internal temperature rises

slightly. This function quickly cools the groceries by temporarily

reducing the temperature until it reaches the ideal level.

• Place only cold or lukewarm foods in the compartment, never

hot foods (see Precautions and tips).

• Remember that cooked foods do not last longer than raw

• Do not store liquids in open containers: they will increase the

level of humidity in the refrigerator and cause condensation to

SHELVES: with or without grill.

Due to the special guides the shelves are removable and the height

is adjustable , allowing easy storage of large containers and food.

Height can be adjusted without complete removal of the shelf.

TEMPERATURE Indicator light*: to identify the coldest area in the

1. Check that OK appears clearly on the indicator light (see

2. If the word “OK” does not appear it means that the temperature is

too high: adjust the REFRIGERATOR OPERATION knob to a

higher position (colder) and wait approximately 10 hours until the

temperature has been stabilised.

3. Check the indicator light again: if necessary, readjust it following

the initial process. If large quantities of food have been added or

if the refrigerator door has been opened frequently, it is normal

for the indicator not to show OK. Wait at least 10 hours before

adjusting the REFRIGERATOR OPERATION knob to a higher

This is the new box to keep meat, fish and cheese fresh.

positioned in the “lower” part of the fridge compartment, it is ideal

for meat and fish; when moved to the “top” part of the fridge, it is

It can be taken out of the fridge when it is not

Thanks to the powerful light it emits, the new dual LED lighting

system offers a clear view of all foods, with no shadowy areas.

If the LEDs need to be replaced, please contact the Technical

Using the freezer to its full potential

• Do not re-freeze food that is defrosting or that has already been

defrosted. These foods must be cooked and eaten (within 24

• Fresh food that needs to be frozen must not come into contact

with food that has already been defrosted. Fresh food must be

stored in the top FREEZER and STORAGE compartment where

the temperature drops below -18°C and guarantees rapid

• To freeze fresh food in the best and safest way possible, activate

the SUPER FREEZE function 24 hours before placing the food in

the freezer. After placing the food inside, activate the SUPER FREEZE function again; it will be deactivated automatically after 24

• Do not place glass bottles which contain liquids, and which are

corked or hermetically sealed in the freezer because they could

• The maximum quantity of food that may be frozen daily is

indicated on the plate containing the technical properties located

on the bottom left side of the refrigerator compartment (for

example: Kg/24h: 4).

• In order to obtain a greater amount of space in the freezer

compartment, you may remove the bins (except the lowest bin

and the special COOL CARE ZONE bin, which has an

adjustable temperature) and place the food directly onto the

! If the room temperature drops below 14°C for an extended period

of time, the ideal temperature will not be reached in the freezer

compartment and food preservation will be reduced.

! Do not open the door during freezing.

! If there is a power cut or malfunction, do not open the freezer

door. This will help maintain the temperature inside the freezer,

ensuring that foods are conserved for at least 9 -14 hours.

The fact that they are situated on the top part of the freezer

drawers ensures greater cleanliness: the ice no longer comes into

contact with the food placed inside the freezer compartment;

furthermore, the dripping of the water during filling is avoided (a lid

to cover up the hole after filling with water is also provided).

1. Pull out the tray by pushing it up. Check that the tray is

ompletely empty and fill it with water through the opening

2. Take care not to exceed the level indicated (MAX WATER LEVEL). Excess water prevents the ice cubes from dispensing

(if this happens, wait for the ice to melt and empty the tray).

3. Turn the tray 90°: due to the connected compartments each

mould fills with water (

4. Close the opening with the lid provided and put the tray back,

placing the top part in the corresponding housing and allowing it

5. When the ice has formed (minimum time approximately 8 hours)

knock the tray against a hard surface and wet the outside so

that the ice cubes come loose and take them out through the

opening. WATER LEVEL MAX WATER LEVEL MAX WATER LEVEL MAX

* Varies by number and/or position, available only on certain

* Varies by number and/or position, available only on certain models. Maintenance and care

Switching the appliance off During cleaning and maintenance it is necessary to disconnect theappliance from the electricity supply:1. Press the ON/OFF button to switch off the appliance.2. Pull the plug out of the socket.! If this procedure is not followed, the alarm may sound. This alarmdoes not indicate a malfunction. To restore normal operation, hold theON/OFF button down for more than two seconds. To disconnect theappliance, follow points 1 and 2 above. I Care function The I Care function can be activated to optimise energyconsumption while maintaining the cooling performance of theproduct.This function maximises the amount of energy saved.Under these conditions, the display remains off even when the dooris opened. The function is activated by pressing and holding thesuper freezer and FRZ (+) buttons simultaneously for at least 6seconds. Once the function has been activated, all LEDs will lightup for 2 seconds to confirm activation, and the temperature settingof +5, -18 will appear on the display. The display switches off after5 seconds. To change the temperature, simply press the + and –buttons until you have reached the desired temperature.However,the I Care function can also be disabled by switching the productoff using the ON/OFF button. When it is switched back on, the ICare will be disabled.In humid environments, when the I Carefunction is enabled, slight condensation may form on the appliancedoor; normal operating conditions are restored when the function isdisabled. Cleaning the appliance • The external and internal parts, as well as the rubber seals maybe cleaned using a sponge that has been soaked in lukewarmwater and bicarbonate of soda or neutral soap. Do not usesolvents, abrasive products, bleach or ammonia.• The removable accessories may be soaked in warm water andsoap or dishwashing liquid. Rinse and dry them carefully.• The back of the appliance may collect dust which can beremoved by delicately using the hose of a vacuum cleaner seton medium power. The appliance must be switched off and theplug must be pulled out before cleaning the appliance. Avoiding mould and unpleasant odours • The appliance is manufactured with hygienic materials which areodour free. In order to maintain an odour free refrigerator and toprevent the formation of stains, food must always be covered orsealed properly.• If you want to switch the appliance off for an extended period oftime, clean the inside and leave the doors open. Replacing the light bulb * To replace the light bulb in the refrigerator compartment, pull outthe plug from the electrical socket. Follow the instructions below.Access the light bulb by removing the cover as indicated in thediagram. Replace it with a similar light bulb within the power rangeindicated on the cover. 1 1

Precautions and tips ! The appliance was designed and manufactured in compliancewith international safety standards. The following warnings areprovided for safety reasons and must be read carefully. This appliance complies with the following Community Directives:- 73/23/EEC of 19/02/73 (Low Voltage) and subsequentamendments;-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) andsubsequent amendments;- 2002/96/CE. General safety • The appliance was designed for domestic use inside the homeand is not intended for commercial or industrial use.• The appliance must be used to store and freeze food productsby adults only and according to the instructions in this manual.• The appliance must not be installed outdoors, even in coveredareas. It is extremely dangerous to leave the appliance exposedto rain and storms.• Do not touch the appliance with bare feet or with wet or moisthands and feet.• Do not touch the internal cooling elements: this could cause skinabrasions or frost/freezer burns.• When unplugging the appliance always pull the plug from themains socket, do not pull on the cable.• Before cleaning and maintenance, always switch off theappliance and disconnect it from the electrical supply. It is notsufficient to set the temperature adjustment knobs on ON/OFF(appliance off) to eliminate all electrical contact.• In the case of a malfunction, under no circumstances should youattempt to repair the appliance yourself. Repairs carried out byinexperienced persons may cause injury or furthermalfunctioning of the appliance.• Do not use any sharp or pointed utensils or electrical equipment- other than the type recommended by the manufacturer - insidethe frozen food storage compartments.• Do not put ice cubes taken directly from the freezer into yourmouth.• This appliance is not intended for use by persons (includingchildren) with reduced physical, sensory or lack of experienceand knowledge unless they have been given supervision orinstruction concerning use of the appliance by a personresponsible for their safety. Children should be supervised toensure that they do not play with the appliance.• Keep packaging material out of the reach of children! It canbecome a choking or suffocation hazard. Disposal • Observe local environmental standards when disposingpackaging material for recycling purposes.• The European Directive 2002/96/EC on Waste Electrical andElectronic Equipment (WEEE), requires that old householdelectrical appliances must not be disposed of in the normalunsorted municipal waste stream. Old appliances must becollected separately in order to optimise the recovery andrecycling of the materials they contain and reduce the impact onhuman health and the environment. The crossed out “wheeledbin” symbol on the product reminds you of your obligation, thatwhen you dispose of the appliance it must be separatelycollected. Consumers should contact their local authority orretailer for information concerning the correct disposal of theirold appliance.GB

Respecting and conserving the environment

• Install the appliance in a fresh and well-ventilated room. Ensure

that it is protected from direct sunlight and do not place it near

• Try to avoid keeping the door open for long periods or opening

the door too frequently in order to conserve energy.

• Do not fill the appliance with too much food: cold air must

circulate freely for food to be preserved properly. If circulation is

impeded, the compressor will work continuously.

• Do not place hot food directly into the refrigerator. The internal

temperature will increase and force the compressor to work

harder and will consume more energy.

• Defrost the appliance if ice forms (see Maintenance). A thick

layer of ice makes cold transference to food products more

difficult and results in increased energy consumption.

If the appliance does not work, before calling for Assistance (see

Assistance), check for a solution from the following list.

The display is completely switched off.

• The plug has not been inserted into the electrical socket, or not

far enough to make contact, or there is no power in the house.

• The I-Care function is active.

The motor does not start.

• The appliance comes with a motor protection control (see Start-

The display is on but it is dim.

• Pull out and reverse the plug before putting it back in the

The alarm sounds and DOOR OPEN ALARM flashes on the

display (“dr” is displayed instead of the REFRIGERATOR

• The refrigerator door has been open for more than two minutes.

The sound alert stops when the door is closed or when the

appliance is switched off and on again.

The alarm sounds and TEMPERATURE ALARM flashes on the

display (“A1” is displayed instead of the FREEZER

• The temperature inside the freezer is too high. The freezer will

maintain a temperature of around 0°C so that the food will not

refreeze, allowing you to eat it within 24 hours or to refreeze it

after it has been cooked.

To switch off the buzzer, open and close the appliance door or

press the + and – freezer temperature adjustment buttons

once. Press these buttons a second time to display the set

value on the freezer display, switch off the TEMPERATURE ALARM LED and restore normal operation.

The alarm sounds and temperature alarm flashes on the

display (“A2” is displayed instead of the FREEZER

• The temperature of the freezer is dangerously high: the food

inside must not be eaten. The freezer will maintain a temperature

of approximately -18°C.

To switch off the buzzer, open and close the appliance door or

press the + and – freezer temperature adjustment buttons

once. Press these buttons a second time to display the set

value on the freezer display, switch off the TEMPERATURE ALARM LED and restore normal operation.

The refrigerator and the freezer do not cool well.

• The doors do not close properly or the seals are damaged.

• The doors are opened too frequently.

• The temperature that has been set is too high (see Start-up and

• The refrigerator or the freezer have been over-filled.

The food inside the refrigerator is beginning to freeze.

• The temperature that has been set is too low (see Start-up and

The motor runs continuously.

• The function SUPER FREEZE has been enabled

• The door is not closed properly or is continuously opened.

• The outside ambient temperature is very high.

The appliance makes a lot of noise.

• The appliance has not been installed on a level surface (see

• The appliance has been installed between cabinets that vibrate

• The internal refrigerant makes a slight noise even when the

compressor is off. This is not a defect, it is normal.

Early ending of functions

• Electrical disturbance on the network or brief interruptions of the