E200 - Tablet Tibuta - Free user manual and instructions

USER MANUAL E200 Tibuta

1 Attention 02
2 Main function 03
3 Appearance and button 04
4 First use 05

4.1 Battery management and Charge 05
4.2 Connection with PC 05

5 Equipment operation interface 06

5.1 Main interface describe 06
5.2 Status bar describe 07
5.3 Use touch panel 07

6 Equipment basic set setting 08

6.1 Sound Volume 09
6.2 Application 10
6.3 Reset Option 11
6.4 Storage 12
6.5 Language & Keyboard 13
6.6 Data & time setting 14
6.7 About Tablet 15

7 File Manager 16
8 Problem Solution 17

8.1 Device can't open 17
8.2 Device shut down after start up 17
8.3 Headset can't hear the voice 17
8.4 Can't copy file or play music and so on 17

1. Attention:

• Please don't be in high temperature, moisture or very dust place
• Avoid fall or Violent collision of the device, don't make the display screen were violent tremor, this could cause display screen abnormal or damage.
• please charge in the following condition,

A. The battery power icons show have no power
B. The system automatically shut off, startup after power off soon
C. Operation buttons no response
D. The device on the top right corner show red icons When the device in the format or ongoing upload and download file, please don't suddenly disconnect, this could cause application error.

• Don't disassemble the product, don't use alcohol, Thinner or benzene to scrubbing products

2. Main function

Operation systems:AndroidTM 12
Processor: MTK 8183
CPU processor speed: 64-Bit Octa 4 Cortex-A73 + 4 Cortex-A53 2.0GHz
EMMC:64GB
RAM:4GB
WI-FI Function:802.11b/g/n/ac
Bluetooth: 4.2
- Micro SD card: up to 512GB
Display screen: 10.1inch Capacitive multi-touch
Resolution: 800^*1280 IPS
Dual camera: Front:5.0M Pixels; Rear: 8.0M Pixels
- Battery and capacity: rechargeable Built-in type polymer battery, 3.85V/7000mAh
USB:2.0
G-sensor 3D
Support Speaker
Record: built-in microphone
- MIC phone: input
Video:DIVX4/DIVX5/DIVX6/DIVX HD/XVID/MPEG-4 SP/ASP/MPEG2/HEVC/Sorenson H.263/H.263/VP9/H.264
Audio:WAV, MP3, MP2, AAC, AMRNB, AMR-WB, MIDI, Vorbis, APE, AAC-plus v1, AAC-plus v2, FLAC, WMA, ADPCM
Pictures: JPG, JPEG, BMP, and PNG
Recording function:Format supported: 3ga Format
- 3G function: Support external 3G USB-DONGOLE wireless network
E-book Function:Format Supported: TXT,EPUB,PDF,WORD,EXCEL,PPT
Working temperature: -5 40^
- Languages: Chinese, English, Japanese, French, German, Spanish, Russian, etc.
- The company reserves the right to improve product, products specification and design have any change, and the information is subject to changes without prior notice.

3. Appearance and button:

1 Power Button
2 TYPE-C
3 Volume buttons
4 Micro SD Card

5 Rear Camera
6 Reset Button
7 Headphone jack
8 Speakers

4. First use

4.1 Battery management and charge

Before first use, please charge the device's battery to 100% .

The first two times charging please keep it charging for about 6 hours, after that you just need leave it charging 4 hours or until fully charged.

Attention: This tablet uses Built-in type polymer battery, Charge must be to choose standard adaptor (Adaptor: power supply: DC 5V 2A, adaptor technical data: input AC100-240V,50/60Hz, DC5V 2A)

4.2 Connection with PC

Use USB cable to connect the PC. First turn on the device; next, click USB connection window on the notification bar; lastly, turn on Transfer Files to connect to PC

5. Equipment operation interface

5.1 Main interface describe

After startup will enter the main interface, In the main interface, you can Management the main interface software icons by:

a) long press the icons for 3 seconds; after the icon will get bigger, allowing you to drag it anywhere in the interface.
b) Delete icons: long press the icon for 3 seconds; after, drag the icons to the Recycle Bin icon. Once it becomes red, Let go of the icon and app will be deleted.
c) To change wallpaper, Please enter "Settings" > "Display" > "Wallpapers"

5.2 status bar describe

Top right displays the battery, battery charge icons, current time, Settings Menu

5.3 Use touch panel

No matter which interface you are in, you can go back to main screen by pressing the soft key on the bottom middle corner of the main screen.

In different applications, by tapping the back soft key on the bottom middle corner on the touch screen, you can return to its previous interface

6. Equipment Basic Setting:

Click setting icons to enter the setting Interfaces.

6.1 Sound Volume

6.2 Application

Manage applications

A、Enter "Settings" > "Apps & Notifications" And then there will be App list
B、Select the one you want to uninstall, it will enter the following interface
C、Click Uninstall, then you can delete the application

6.3 Reset Options

Please enter "Settings" > "System" > "Reset Options" > "Erase all data

6.4 Storage

Remove SD card, to view of the available storage space

6.5 Language & keyboard

Setting: (Language), text input and automatic error correction options;

6.6 Date & time setting

Set date, set time, select time zone and select date format

6.7 About Tablet

Please enter "Setting" > "System" > "About Tablet"

7. File Manager

This Tablet can support Android APP in market by third party, most Apps can install in the network, can copy to NAND FLASH or SD card.

Click "Files Go" APP to open, then you can check Apps, Images, Videos, Audio and Documents.

8. Problem solution

8.1 Device can't open

A、Check the battery power
B、Connect adaptor first, then check again
C、Press the "reset" key first, the press "power" key
D、After charging then can't to open, please contact with the supplier

8.2 Device shut down after start up

After startup the screen or the Power On Image appears, the device appear shutdown: Power is not enough, please charge

8.3 Headset can't hear the voice

A、Please check the volume whether set to 0
B、Check if the music file is damaged. Try playing another audio file.
C、If the file has been damaged it may lead to serious noise or popping sounds.

8.4 Can't copy file or play music, etc....

A、Please check if the computer and device are correct connected
B、check if the memory storage space is full
C、check if the USB cable is good or not
D、USB connection is disconnected

8.5 Forget the password!

A、Hold down the POWER and Volume "-" keys simultaneously for 5-8 seconds.
B、Release the volume key when the machine appears in factory mode, then continue to use the volume reduction key to select "Clear eMMC", and use the on key to confirm.
C、Wait about one minute for the welcome screen to appear, and then re-enter the Android system.

WARRANTY CARD

Model Name

Product Serial No.

Date of purchase

dd

mm

yy

Customer's Details

Name

Address in full

Telephone No.

Dealer Name & Address

Customer's signature & Date

Dealer's signature with rubber stamp

Designed by Tibuta,Assembled in PRC

CONTACT INFORMATION

[e-mail]

www.tibutapad.com

UK

AR

Company: UK CROSSBORDER LIMITED

Address: 7 Bell Yard London WC2A 2JR,UK

Mail: [e-mail]

Warning

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause interference.

This device must accept any interference, including interference that may cause undesired operation of the device.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID:2AXUI-E200

Warning:

1.Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
2.CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
3.The product shall only be connected to a USB interface of version USB2.0.
4. Adapter shall be installed near the equipment and shall be easily accessible.
5. Operation temperature: -10 40^
6. The plug considered as disconnect device of adapter.
7.The device complies with RF specifications when the device used at 5mm from your body. The device is in compliance with the requirements.

This information has to be presented in such a way that the user can readily understand it. Typically, this will necessitate translation into every local language (required by national consumer laws) of the markets where the equipment is intended to be sold. Illustrations, pictograms and using international abbreviations for country names may help reduce the need for translation.

Restrictions in the 5 GHz band:

According to Directive SI 2017/1206, the packaging showthat this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT),Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),Finland (FI), Sweden (SE), the Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).

The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350MHz frequency range.

UK Declaration of Conformity We,

CHITECH SHENZHEN TECHNOLOGY CO.,LTD (101, NO.48, Xiashijia Road, Gongming Town, Guangming Dist., Shenzhen, China) hereby declares that this Tablet PC is in compliance with the essential requirements and other relevant provisions of Directive SI 2017/1206.

According to Directive SI 2017/1206, the Tablet PC can be used in Great Britain (England, Wales and Scotland) but with restriction.

Contidente

Designed by Tibuta,Assembled in PRC

EU

REP

Company: Skylimit Service GmbH

Address: Roedingsmarkt 20, 20459 Hamburg

Mail: [e-mail]

KONTAKTINFORMATION

[e-mail]

www.tibutapad.com

Warning:

Designed by Tibuta,Assembled in PRC

KONTAKTINFORMATION

[e-mail]

www.tibutapad.com

Company: Skylimit Service GmbH

Address: Roedingsmarkt 20, 20459 Hamburg

Mail: [e-mail]

Attention:

Manufacturer: CHITECH SHENZHEN TECHNOLOGY CO.,LTD

Address:101,NO.48,Xiashijia Road,Gongming Town,Guangming

Dist.,Shenzhen,China