LT-50FA110 - TV JVC - Free user manual and instructions

USER MANUAL LT-50FA110 JVC

PRODUCT INFORMATION SHEET

LICENSE INFORMATION Dear Customer, [European Union] This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. Etablissements Darty & fils ©, 129 Avenue Gallieni, 93140 Bondy, France

DVB and the DVB logo are trademarks of the DVB project. The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Google, Google Play, Chromecast, YouTube, Android TV and other related marks and logos are trademarks of Google LLC. Netflix is a registered trademark of Netflix, Inc. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by Express Luck Technology Ltd. is under licence. Other trademarks and trade names are those of their respective owners.

Ventilation: Allow at least a 10 cm gap all around the product. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. To protect the environment, use local recycling facilities for battery disposal. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Attention should be drawn to the environmental aspects of battery disposal. Don’t throw used batteries in dustbin. Please contact your retailer in order to protect the environment. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery or expose to excessive heat such as sunshine, fire or the like that can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected in extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Different types of batteries or new and used batteries are not to be mixed. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the appliance. The supply terminal are not to be short-circuited.

Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture. Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied.

Do not use this apparatus near water. Clean only with dry cloth. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when not in use for long periods of time.

AND KEEP FOR FUTURE REFERENCE. To prevent possible high sound pressure and hearing damage risk, do not listen at high volume levels for long periods. Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

Using cabinets or stands recommended by the manufacturer of the television set. Only using furniture that can safely support the television set. Ensuring the television set is not overhanging the edge of the supporting furniture.

This symbol indicates that the apparatus complies with the European radio equipment directive. The letters ‘CE’ signify that products sold in the European Economic Area (EEA) have been assessed to meet high safety, health, and environmental protection requirements. Class II equipment : To identify equipment meeting the safety requirements specified for Class II equipment according to IEC 61140. This symbol indicates that a safety connection to electrical earth (ground) is not required. CAUTION

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating instruction in the literature accompaning the apparatus.

The lightning flash within arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. ASSEMBLY OVERVIEW Stand Assembly Place the TV unit face down on a soft, flat surface to prevent any damage to the screen. Attach the stand to the bottom of the TV using the included screws. Front View Wall Mounting Power on/Standby button 200 mm Rear View 200 mm 10 cm 10 cm CI slot

Wall mount hole pattern VESA (mm) 200 x 200mm Wall mount screw size (mm) M6 x 100mm The TV can be mounted on a wall using a 200mm x 200 mm VESA kit sold separately. Place the TV face down on a clean, safe and cushioned surface. Remove the TV stand if you have already attached it. Mount the TV according to the instructions supplied with the kit. Beware of electrical cables, gas and water pipes in the wall. To complete the installation, please contact the store from which you purchase the TV. Satellite socket Ethernet port OPTICAL jack HDMI ports Audio/Video input jacks Earphone jack

REMOTE CONTROL Indicator light Buttons : Power on/Standby Microphone Mute or restore the sound. Media control Play/Pause/Stop/Record program Fast forward/ backward Play the last/next program Numeric Buttons (0 ~ 9) Choose the channel directly or input a number. Display the present channel information such as the current time and channel name in ATV / DTV mode. Display the Electronic Programme Guide (EPG) in DTV mode. Display the on-screen display (OSD) menu. Display/select the signal source. Exit the OSD menu. Return to the previous menu. UP/DOWN/ LEFT/RIGHT Navigate the menu to select the content you need. Confirm the selection in the OSD menus. Display the channel list in ATV / DTV mode. Google Assistant This function is not available in certain languages and countries. Increase or decrease the sound volume. Change to the next or previous program. Display the Android TV homepage.

Access Netflix. Access Youtube. Colour Buttons (RED/GREEN/ YELLOW/BLUE) Function buttons Access the TELETEXT items in DTV mode. Access menu option. Display the audio language list and select an audio language or audio format if the TV program has this feature. Turn on or off the teletext function in DTV mode. RM-C3414 Display the subtitle language in DTV mode. Installing the Batteries

1. Open the cover at the back of the remote control.

2. Install two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and (-) ends

indicated in the battery compartment.

3. Replace the cover.

CONNECTION All connection cables are not supplied. Check to ensure that you have selected the right cables for the ports and that they are connected securely. Loose connections can affect the quality of the picture image and colour. Connecting external devices using AV cable DVD Set-top box Connecting an antenna Antenna cable Room antenna terminal (75-ohm type) You can also use a satellite dish as a TV antenna. Video and Audio (L/R) composite cable Red (R) Yellow (Video) White (L) Satellite cable Speakers Optical cable HDMI cable DVD Set-top box The HDMI ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant TV to ARC-compliant audio devices (e.g. home theatre) through a single HDMI connection. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the ARC-compliant audio devices. The HDMI ARC connection combines both signals. Use an HDMI cable (not included) that supports the ARC function to connect your ARC-compliant audio devices with your ARC-compliant TV. Optical Audio IN Sound bar Connecting earphones You can connect headphones (not provided) to the EARPHONE jack on your TV. While the earphones are connected, the sound from the TV speakers will be disabled. Connecting to the internet You have to connect either LAN or Wi-Fi to access the Internet. Ethernet cable

Connecting external devices using HDMI cable Connecting external devices using optical cable LAN port on the wall Connecting a USB device Your TV supports playback of a wide array of files via a USB connection. Insert the USB device with recorded pictures, audio or videos into the USB 1 or USB 2 port on the TV. Inserting a CI card HDMI-ARC compliant device HDMI port with ARC function Insert your CI card (Conditional Access Module) to watch special digital channels in your area.

INITIAL SETUP Connect the power cord to the power socket after you have completed all the physical connections. The TV will enter Standby Mode and the red indicator light will illuminate. To turn on your TV, press . The indicator light turns green. Press again and your TV will enter the standby mode. The first time you switch the TV on, the initial setup screen appears, which guides you through the initial setup process. Follow the on-screen instructions to finish the initial setup process. Choose a language Press on the remote to select the language, then press to confirm. Quickly set up your TV with your Android phone? (Continue/skip)

1. On your Android Phone, open the pre-installed

2. Type or say, “Ok Google, set up my device”.

3. Tap the model name on the list.

Configure the network Select wired or wireless to connect to internet. If you select skip, it could be performed in homepage or settings menu.

INITIAL SETUP Google Account Sign in Sign in to get new apps, recommendations, movies, the Assistant, and more from Google. Two ways to login Google account: Play Auto Installs Select install or un-install the recommended apps and Google apps by using this process. Press “Continue” to the next setting page. Use your phone or computer:

1. Visit androidtv.com/setup on your phone or

computer. Make sure your other device is on the same Wi-Fi network as your TV.

2. Enter the display code on your phone or

computer. Pairing Bluetooth Remote Press the and Volume buttons simultaneously on the remote to enter the Bluetooth pairing mode. The indicator light on the remote will flash. Press to begin pairing. on the remote to skip the pairing mode.

Use your remote: Use the remote to enter your Google account and password to sign in to Google account. Press Google setting In these steps you will setup the Terms of Service, Location, Help improve Android, Google Assistant and additional Google functions.

INITIAL SETUP ACCESSING HOMEPAGE Country select Press on the remote to select the country option, then press to confirm. on the remote control to display the Android Press TV homepage. Select TV mode (Home/Retail) Home mode is optimized for efficient energy usage for home use. Retail mode is optimized to store demo with fixed settings. and Press functions or settings. to enter the desired Apps, Use Google keyboard to type searching movies, TV and more Chromecast built-inTM Select On/Off to make Chromecast built-in available. TV Channel Setting Select Antenna/Cable/Satellite to scan TV channel. If you select skip, the channel scan could be performed in menu.

Use your voice to search for shows, control devices, and more.

Display the list of installed apps.

Allow you to see content such as video programmes you have not finished watching, the next episode or new seasons of your favourite programmes, and the content you added to Play Next. Setup completed and Disclaimer Terms

Notifications: Displayed when there are notifications such as when there is a connection issue. The number indicates the number of notifications. Inputs: Switches the input device connected to the TV. Configure the network settings. Configure various TV-related settings.

Display your favourite apps. Select + to add an app to favourites.

Here, you can watch recommended content from video streaming services.

on the remote control to display the Android TV homepage. to move the cursor to

to enter the option list.

to return to the previous menu. to close the settings menu and return

to the homepage. General settings

• Network & Internet Configure the Wi-Fi and Ethernet settings. The network status is also displayed.
• Channel Press to select the “Channel” menu, and then press to select the “Parental Controls” and press to enter. NOTE : Please make sure to store/save your PIN code somewhere you can access in the future. If you forget the PIN code, you will need to perform a factory data reset to reset the PIN. Press code. or the numeric button to enter your PIN

Accounts & Sign In Sign in to your Google account to make the most of your TV. Apps View the list of recently opened apps, all installed apps, and the system apps. You can also add permissions for different apps, and configure special app access to save power and storage, and more. Device Preferences Set the preferences of the Android TV. Press to select the items you want to set, and then press To return to the previous menu, press . To exit the menu, press

‒ About Check for system updates and view legal information, versions, etc. ‒ Date & time Set the date and time. You can choose whether to auto synchronize or to manually set date and time. You can also set 24-hour format. ‒ Timer Allow you to manually set the timer. ‒ Language Select a menu language. The selected menu language will also be set as the voice recognition language.

You can configure settings of Android TV features, such as network, accounts, apps, device preferences, remotes and accessories, etc. ‒ Keyboard Allow you to set the keyboard options. ‒ Inputs Set the name of the connected inputs (HDMI 1, HDM 2, HDMI 3 or Composite). In addition, you can set up the CEC functions. ‒ Power Allow to set the sleep timer. After the preset time has elapsed, the sleep timer puts the TV into standby. You can also set auto off time if no signal is received for the specified duration.

SETTINGS ‒ Picture Allow to set the picture items (brightness, colour saturation, etc.) according to your preference. ‒ Sound Allow to set the sound items (Sound style, Balance, etc.) according to your preference. ‒ Storage View the memory usage status, clear data, cache and defaults, etc. ‒ Home screen Customize channels, enable video and audio previews, reorder apps and games, and view the open source licenses for Android TV home and Android TV core services. ‒ Google Assistant Configure the Google search settings, including selecting which apps to be included in search results, enabling the SafeSearch filter, blocking offensive words, and viewing permissions and open source licenses. ‒ Chromecast View the version number and open source licenses of Chromecast.

‒ Screen saver Configure the screen saver settings, including the way of screen saver, the inactivity time after which to start screen saver, the inactivity time after which to put device to sleep, the sleep timer, or to start screen saver right now. ‒ Location Set whether to enable the location function using Wi-Fi and view the list of apps that requested the location recently. ‒ Usage & Diagnostics Set whether to automatically send diagnostic information to Google or not. ‒ Accessibility Configure Caption, High contrast text, and Accessibility shortcut, etc. ‒ Reset Restore your TV to its original factory settings.

• Remotes & Accessories Search for Bluetooth accessories and pair them with your TV. You can set up your TV to make it visible to all nearby Bluetooth devices.

USING EPG (ELECTRONIC PROGRAMME GUIDE) Press to select “Apps” on the homepage, then press to enter. Select “Get more apps” and input the app name. Select “search” which is in the upper right corner of the page. EPG is an on-screen guide available for digital channels ONLY. EPG allows you to view a list of digital programs being broadcast. To enter the EPG, press on the remote control and the program guide menu will appear. You can use on the remote control to navigate through the different programs. Use the related color buttons shown at the bottom of the screen to view EPG. NOTE : When you go through the programs, the background channel changes according to the programs viewed. Red button (Previous Day) : Display the programs of previous day. Green button (Next day) : Display the programs of the next day. Yellow button (View Detail) : Display the detailed information of programs in multiple pages. Example for “Facebook” Blue button (Type Filter) : Display the type list of the program. You can navigate through the different types and available subtypes using on the remote control. Select one or more types and then press After filtering, all your desired digital TV programs will be highlighted. Move Select “Facebook”, press and hold the button on to select “Move”. the remote control, then press Press to move, then press to confirm.

Install Input “Facebook”. The “Facebook” App will be shown in the list, then press to select it. Select “Install”. Uninstall Select “Facebook”, press and hold the button on the remote control, then press to select “Uninstall”. Press to uninstall.

The limitation of max resolution depends on DRAM size. BMP 9600 x 6400 The limitation of max resolution depends on DRAM size. GIF 6400 x 4800 (800 x 8 x 600 x 8) The limitation of max resolution depends on DRAM size.

Remark on the remote. Press Press on the remote to select “Channels” and then select “New Channels Available” to enter. SubViewer 1.0 & 2.0 Only SOFTWARE UPDATE When accessing the TV homepage by pressing on the remote control, your TV will automatically check for update and the TV screen will show the downloading and restarting progress. When the software update is installed, your TV will have the new software version.

Your TV is capable of finding and updating software automatically. In order to perform software update, ensure that your TV must be connected to the Internet through a wired or wireless network. Users can also check themselves if the software update is available or not, through ABOUT in the setting menu.

Audio Output Power (WRMS.) (10% THD) 2x8W Dimensions DxLxH (with foot)

228.65 x 1111.24 x 709.49 mm

Weight (with foot) 10 kg Dimensions DxLxH (without foot)

85.6 x 1111.24 x 647.36 mm

Weight (without foot) 9,5 kg Surrounding temperature Operation: 0°C ~ 40°C Storage: -10°C ~ 60°C Operating Humidity Less than 80 % RH Standby Mode After 4 hours 500mA

UKNI The radio equipment will be subject to some restrictions when placed on the markets in Belgium (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE) and Northern Ireland (UKNI). This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

PRODUCT INFORMATION SHEET

Parameter Parameter value and precision Unit Supplier’s name or trade mark JVC Supplier’s address Etablissements Darty & fils ©, 129 Avenue Gallieni, 93140 Bondy, France Supplier’s model identifier LT-50FA110 Energy efficiency class for standard Dynamic Range (SDR)

On mode power demand for Standard Dynamic Range (SDR)

Energy efficiency class (HDR)

On mode power demand in High Dynamic Range (HDR) mode

Off mode, power demand N/A

inches Visible screen area 67,5451 dm2 Panel technology used LED LCD Automatic Brightness Control (ABC) available

Voice recognition sensor available

Room presence sensor available

Image refresh frequency rate

Minimum guaranteed availability of software and firmware updates (from the date of end of the placement on the market)

Years Minimum guaranteed availability of spare parts (from the date of end of the placement on the market)

Years Minimum guaranteed product support

Years Minimum duration of the general guarantee offered by the supplier

Check that the power plug is securely into the mains socket. Check the power is on. Signal not received properly

Double or phantom images may appear on your TV if there are high buildings or mountains close to where you are. You can adjust the image through manual operation or adjust the direction of external antenna. If you use an indoor antenna, signal reception may be more difficult under certain circumstances. Adjust the direction of the antenna for optimum reception. If this does not improve reception, you may have to switch to an external antenna.

Check if the antenna is properly connected to your TV. View other channels to see if the problem still occurs. Video appears with no audio

Try increasing the volume. Check if the TV sound is muted. Audio is present, but video does not appear or is discoloured. Try adjusting the contrast and brightness. Static noise affects video and audio quality. Check if the antenna is properly connected to the TV. Broken lines on screen Electrical appliances such as hair dryers or vacuums, etc. may be interfere with the TV. Switch off these appliances. The remote control does not work.

Check if the TV is not switched on. Check that the batteries of the remote control are inserted properly. Check for any obstacles between the TV remote sensor and the remote control. Remove them if necessary. If the batteries have no power, replace them with two new batteries off the same type. What to do if the picture/image When you use your TV as a monitor, you may use the following conversion cable (not quality is poor when inputting DVI supplied) to connect the legacy PC with DVI or VGA output. In this case, DVI signal is signal? inputted to your TV. e.g. DVI to HDMI conversion cable, VGA to HDMI conversion cable If the picture/image quality is poor as below for example, please try the following steps. The gradation of the clouds in the highlight part disappears, and the shape cannot be distinguished. Good

The gradation of the grass shade in the lowlight part disappears and it becomes black.

Poor Keep the selected input and disconnect the cable so that no signal is displayed on the TV screen. Enter the Settings menu and select items Device Preferences -> Picture -> Advanced Video -> HDMI RGB Range. Change the HDMI RGB Range setting from Auto (Default) to Full. Connect the cable to the legacy PC again and check the picture/image quality. DISPOSAL As a responsible retailer we care about the environment. As such we urge you to follow the correct disposal procedure for the product, packaging materials and if applicable, accessories and batteries. This will conserve natural resources and ensure that the material is recycled in a manner that protects health and the environment. You must follow laws and regulations about disposal. Waste electrical products and batteries must be disposed of separately from household waste when the product reaches the end of its life. Contact the store where you bought the product and your local authority to learn about disposal and recycling. The batteries must be disposed of at your local recycling point. We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development.