LT-43FV130 - TV JVC - Free user manual and instructions

USER MANUAL LT-43FV130 JVC

Disney+ subscription required, see terms at https://www.disneyplus.com. © 2022 Disney and its related entities.

Streaming-abonnement van Netflix vereist. Beschikbaarheid van 4K Ultra HD is onderworpen aan je Netflix-abonnement, internetprovider, de mogelijkheden van het apparaat en de beschikbaarheid van content. www.netflix.com/TermsOfUse

© 2022 Amazon.com, Inc. or its affiliates. Amazon, Prime Video, and all related marks are trademarks of Amazon.com, Inc. or its affiliates. Amazon Prime membership or Prime Video fees apply. See primevideo.com/terms for details.

Disney+ subscription required, see terms at https://www.disneyplus.com. © 2022 Disney and its related entities.

Requer adesão ao serviço de streaming da Netflix. A disponibilidade de 4K Ultra HD depende do plano de subscrição da Netflix, do serviço de internet, da capacidade do dispositivo e da disponibilidade de conteúdos. www.netflix.com/TermsOfUse

© 2022 Amazon.com, Inc. or its affiliates. Amazon, Prime Video, and all related marks are trademarks of Amazon.com, Inc. or its affiliates. Amazon Prime membership or Prime Video fees apply. See primevideo.com/terms for details.

LICENSE INFORMATION 2 WARNINGS3 PRODUCT DESCRIPTION 5 ASSEMBLING 7 REMOTE CONTROL 8 CONNECTIONS10 BASIC OPERATION14 USING THE MENUS16 SPECIFICATIONS 27 TROUBLESHOOTING30 DISPOSAL 30

This product is manufactured, distributed, serviced and warranted exclusively by Etablissements DARTY et Fils. "JVC" is the trademark of JVCKENWOOD Corporation, used by Etablissements DARTY et Fils under license.

[European Union] Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. Etablissements Darty & fils © , 9 Rue des Bateaux-Lavoirs, 94200 Ivry-sur-Seine, France

LICENSE INFORMATION DVB and the DVB logo are trademarks of the DVB project.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Disney+ subscription required, see terms at https://www.disneyplus.com. © 2022 Disney and its related entities.

Netflix streaming membership required. 4K Ultra HD availability subject to your subscription plan, Internet service, device capabilities, and content availability. www.netflix.com/TermsOfUse

© 2022 Amazon.com, Inc. or its affiliates. Amazon, Prime Video, and all related marks are trademarks of Amazon.com, Inc. or its affiliates. Amazon Prime membership or Prime Video fees apply. See primevideo.com/terms for details.

WARNINGS  This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application, such as for non domestic use or in a commercial environment.  Ventilation Allow at least a 10 cm gap all around the product.  The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.  No naked flame sources, such as lighted candles, should be placed on the apparatus.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.  This apparatus is intended for use in a tropical climate.  The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.  To protect the environment, use local recycling facilities for battery disposal.  Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.  CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.  The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.  Attention should be drawn to the environmental aspects of battery disposal. Don’t throw used batteries in dustbin. Please contact your retailer in order to protect the environment.  Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery or expose to excessive heat such as sunshine, fire or the like that can result in an explosion.  Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.  A battery subjected in extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.    

Different types of batteries or new and used batteries are not to be mixed. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the appliance. The supply terminal are not to be short-circuited.

To prevent possible high sound pressure and hearing damage risk, do not listen at high volume levels for long periods.

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: - Using cabinets or stands recommended by the manufacturer of the television set. - Only using furniture that can safely support the television set. - Ensuring the television set is not overhanging the edge of the supporting furniture. - Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. - Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture. - Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied.

IMPORTANT SAFETY INSTRUCTIONS  Read these instructions and keep them for further reference. Follow all instructions. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

This marking indicates that the unit complies with the European radio equipment directive.

This symbol indicates that the unit has double insulation.

 Do not use this apparatus near water.  Clean only with a dry cloth.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.  Unplug this apparatus during lightning storms or when unused for long periods of time.  When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.  Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover

This symbol indicates that there are

important operating and maintenance instructions in the documentation accompanying this unit.

the product with cloth or other materials while plugged. Do not install in excessively dusty places.  Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

PRODUCT DESCRIPTION Front and Side Views

 Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

1. Screen 2. Remote control sensor / Power indicator 3. Stand 4. VOL+/- button: Adjust the volume level. 5. CH+/- button: Select previous/next channel or move up/down. 6. MENU button: Access the main menu. 7. SOURCE button: Change the input source. 8.

(STANDBY) button: Turn the power on or off.

Back View 1. Power input 2. LAN input 3. OPTICAL output port 4. AV port 5. RF(S2) port 6. RF port 7. CI+ port 8. EARPHONE jack 9. USB ports 10. HDMI ports

ASSEMBLING Attaching the Stand CAUTION: When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Mounting on a Wall CAUTION:  Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.  The distance between the holes is 200 x 200 mm in width and height.  Tighten the screws (M5x12mm) firmly to prevent the TV from tilting forward. Do not over tighten.

3 Number buttons (0-9) Input the number information, such as channel number and so on.

4 GUIDE Display the Electronic Programmes Guide (DTV mode).

5 CH.LIST Press to show channel list.

6 Red/Green/Yellow/Blue button Color buttons for direct selection of options.

(MENU) Call out the main menu or return to previous menu.

Press to operate start/pause playing; Move fast forward; Move fast backward.

9 DIRECTION/OK Move up, down, left, right/Confirm.

10 Return to the previous interface or menu.

13 VOL +/Increase/decrease the volume level.

/ Play the next/previous program.

Mute or restore the TV sound.

16 SUBTITLE Select available subtitles.

17 TEXT Turn on/off the Teletext.

21 DEEZER Enter to the deezer.

22 Content area Six buttons for direct access to Apps.

Remote control operation 1. Open the battery cover. 2. Insert two AAA size batteries (not included), observing the proper polarity markings inside the battery compartment. 3. Close the battery cover.  CAUTION: Do not mix old and new batteries, as this may damage the remote control.

Be sure to point the remote control at the remote control sensor on the TV. This logo means "positioning of cell".

CONNECTIONS Connecting to AC power source

Use an HDMI cable (not included) to connect the unit with other devices to receive high-definition multimedia signal.

The HDMI ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant TV to ARC-compliant audio devices (e.g. home theatre) through a single HDMI connection. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the ARC-compliant audio devices. The HDMI ARC connection combines both signals.

Use an HDMI cable (not included) that supports the ARC function to connect your ARC-compliant audio devices with your ARC-compliant TV. Ensure HDMI ARC is turned on in the SOUND menu (refer to page EN-19). HDMI port with ARC function

HDMI-ARC compliant device

Listening to Dolby Atmos To play Dolby Atmos content, you can connect your A/V receiver or soundbar that supports Dolby Atmos audio to your TV’s HDMI ARC input.

Dolby Atmos compatible soundbar HDMI port with ARC function

The Digital Audio Output is recommended to be set to “Auto” in order to send Dolby Atmos content via HDMI ARC to the AVR or Soundbar in the optimal Dolby format. To set Digital Audio Output on your TV :  Press

 Go to Sound → Speakers → Digital Audio Output  Select “Auto”.

USB memory device (not included)

Insert your CI card (Conditional Access Module) to watch special digital channels in your area.

EARPHONE CONNECTION Earphone cable (Not included)

LAN (Local Area Network) Connection

Use a LAN cable (not included) to connect this TV with available network.

OPTICAL CONNECTION Use OPTICAL cable (not included) to connect the TV with amplifier or other audio decoding devices for coaxial audio signal output.

AV (Composite video) connection

Use the composite Audio L/R (white/red) and CVBS (yellow) cables (not included) to connect the unit with other devices.

DVD/VCR BASIC OPERATION Make sure all necessary connections are correctly made before connecting the unit to the wall socket and turning on the power. Watching TV 1. Press the STANDBY button to power on the unit. 2. Press the INPUT button to select TV as input source. 3. Choose the channel by pressing CH+ or CH- or by pressing the numeric buttons (combined [-/--] if necessary) to input the channel number directly. Electronic Program Guide (EPG) EPG stands for Digital Electronic Program Guide. It is supplied by the program providers and offers information about the programs to be broadcast. This guide function is only available for digital channels. You can access it by pressing GUIDE button directly or pressing the MENU button, highlight Guide item and press OK button to enter the Electronic Program Guide. The menu will appear on the screen, as below:

 Press ▲/▼navigation button to select preferred channel.  Press ◄/► navigation button to select preferred programme of some channel.  Press the RED button to display a list of scheduled reminders.  Press the GREEN button to display the colour menu and select GREEN, use the colours to indicate different genres in the GUIDE(EPG) for quick and easy viewing .  Press the YELLOW button to display the program guide of the previous day.  Press the BLUE button to display the program guide of the following day.

First time installation When turning on the TV for the first time, it will go straight into the installation menus. Press the UP/DOWN/LEFT/RIGHT buttons to navigate the menu and change the settings. Press the OK button to confirm. Select Language: select the on-screen menu language. Connect to the Internet: select the available internet to connect or skip to the next step. Country: select your country. Select your primary input source: - Press UP/DOWN/LEFT/DOWN BUTTONS to select input source. - Press OK button to confirm your selection.

Available options: Standard Cinema Day Cinema Night Dynamic Sports

Suitable for watching normal content e.g. News, Drama or Documentary. Suitable for watching movies in a bright environment. Suitable for watching movies in dark environment. Suitable for the content that requires vivid picture quality. Suitable for sports and fast-moving content. This setting may provide a brighter picture with faster motion response.

Aspect Ratio You can change the size of the picture displayed on the TV screen. Press UP/DOWN button to select Picture Mode and press OK button to confirm your selection. Available options: Automatic 16:9 4:3 Panoramic Movie Zoom Direct

Automatically switch Aspect Ratio between 16:9 and 4:3 based on the signal information. Suitable for 16:9 Widescreen content. This will also stretch 4:3 content to Widescreen. Suitable for 4:3 content. Provides a full screen image by stretching the edges whilst leaving the middle untouched. Provides a full screen image by zooming in on the movie. Point to point display also known as 1:1 Pixel Mapping.

Game Mode Optimised for PC or Games consoles. Reduces Input Lag and improves responsiveness.

Picture Mode Settings Adjust display setting for each Picture Mode.

Apply Picture Settings: Adjust current picture mode to apply to all source or just current source.

Backlight: Turn Off/On.

Brightness / Contrast / Colour Saturation: Adjustable value: 0-100.

Sharpness: Adjustable value: 0-100.

Adaptive Contrast: Automatically adjust dark areas and light areas of the image to see more details. Press navigation buttons to select Off/Low/Medium/High.

Noise Reduction: Improve the picture quality by reducing noise. (Options: Off/Low/Medium/High)

MPEG Noise Reduction: Reduces MPEG block noise to provide clearer edge transitions. (Options: Off/Low/Medium/High)

Colour Temperature: Adjust the overall color of the image. (Options: Warm1/Warm2/Standard/Cool). Expert Settings: Adjust the colour space and Gamma to best suit the content you're viewing.

Overscan: Change the video size setting to crop the edges of the displayed image.

Reset Current Mode: Restore all the picture settings in the current picture mode to the factory default values.

2. Sound Press UP/DOWN button to select Sound item. Sound Mode You can select a favorite sound mode suitable for the content type or the listening environment. Available options: Standard Theater Music Speech Late Night Sport

In this mode, the TV delivers a flat frequency response, which preserves the natural characteristics of the original sound. This mode increases the surround sound effect and provides a more prominent subwoofer response. In this mode, low and high frequencies are emphasized to enhance musical instrument reproduction. In this mode, low and high frequencies are attenuated to improve the reproduction and clarity of the human voice. In this mode, the TV will improve the reproduction and clarity of the human voice with a low volume level. In this mode, sound is optimized for watching sports/football game.

Headphone Set the sound output mode for headphones. This setting is only available when headphones are inserted. Sound Mode Settings Adjust the audio settings of the TV: Apply Audio Settings / Equalizer / Wall Mount Setup / Auto Volume Control / Reset Current Mode. Speakers Select the speaker you want to use. (ARC: Speakers ＞ Audio Output ＞ ARC)

3. Network Press UP/DOWN button to select Network item. Network Configuration You set the TV network by selecting Configuration and press OK button to enter the sub-page. Connection Type: Choose a wireless network connection to access the Internet. Refresh: Refresh wireless network. Advanced Settings: Configure the advanced wireless network settings of the TV. ADD: You can add wireless network. Internet Connection Check Internet connection. Connection Test: Start a network connection test. Network Information: View information about your network connection. Wake on Wireless Network Using WLAN, turn on your TV with your mobile device. Wake on LAN Using Ethernet, turn on your TV with your mobile device.

Connecting to a Wireless Network You can connect your TV to an available wireless network. If no wireless router is found, select Add and enter the network name in the SSID. If no wireless router is found, select Refresh. Wireless Router

built-in the TV LAN Port on the wall

LAN cable (not provided)

Connecting to a Wired (Ethernet) Network It is recommended to connect your TV to a router that supports Dynamic Host Configuration Protocol(DHCP). The router that support DHCP automatically provides the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually.

4. Channel Press UP/DOWN button to select Channel item. Auto Scan Automatically scan for channels to view programmes from your TV source. ‒ Press RIGHT button to select Rescan or Change Setup. ‒ Highlight Change Setup and press OK button to select Satellite, Antenna, Cable. ‒ Press RIGHT button to enter the Mode setup.

Channel: All Channel, Free Channel. Scan Mode: ATV, DTV, ATV+DTV. LCN: Off/On ‒ Press RIGHT button to start auto scan.

Channel Edit Manually edit the channel list to your preference.

Advanced Settings Adjust advanced settings for Channel. Manual Scan: Perform manual channel scan for ATV and DTV.  DTV Manual Scan: Manually scan for DTV services. When the DTV Manual Scan screen appears, press ◄ / ► button to select Antenna, Cable or Satellite and then press Start to commence the search of that channel. When the signal has been tuned, signal strength will be displayed on the screen.  ATV Manual Scan: Manually scan for ATV services. Channel List Auto Update: Allows your TV to auto-update the channel list from the content provider. Programme Guide Auto Update: TV will automatically update the Programme Guide data overnight while in standby mode. CI+ Module Settings: Review the Advanced Settings menu.-Common interface -CI card and PINCAM Profile search.

5. Accessibility Press UP/DOWN button to select Accessibility item. Menu Scheme Set the scheme of menu. Available options: Dark, Light High Contrast Menu Turn High Contrast Menu On or Off. Menu Transparency Set the transparency of menu.

Available options: Off, Medium, High Hard of Hearing Subtitle Set the subtitles for the hard of hearing. Press OK button to select ON/OFF.

Audio Type Accessibility audio settings.

Dialogue Enhancement Enable or disable dialogue enhancement.

6. System Press UP/DOWN button to select System item. Time Set the current time based on your location. Timer Settings Adjust the timer settings to suit your preference. System PIN Change the PIN that you use to access Parental Control, Auto Channel Scan and Reset To Factory Defaults. Parental Control Turn on Parental Controls to prevent children from being able to view certain content. Language and Location Choose the language of TV and your location. Application Settings Set settings for apps on your TV.

HDMI & CEC Configure how to control CEC - enabled devices with your TV remote.

You can use your TV remote to control the external devices that are connected to the TV with an HDMI cable. The external devices need to support HDMI & CEC Function (HDMI-CEC). 1. Set CEC Control to On. 2. Connect an HDMI-CEC-compliant device to the TV. 3. Turn on the connected external device.  The HDMI CEC feature of the connected device must be turned on. 4. The device is automatically connected to the TV. After connection is finished, you can access the menu of the connected device on your TV screen using your TV remote and control the device.

Usage Mode Select Home mode or Store mode. Advanced Settings Access the Advanced Settings menu.

7. Support Press UP/DOWN button to select Support item. System Info View System information. Self Diagnosis Perform self diagnosis to test sound, picture and connections. E-Manual Launch the E-Manual and get to know more about your TV. System Upgrade Set your TV to receive the latest firmware.

Disclaimer and Privacy Click to read the Disclaimer details.

Mobile App Download Install mobile app on your smart phone to control your TV. This app is available on both Android and iOS. Reset to Factory Default Restore your TV to the factory default.

HOME Getting familiar with the Home screen Run the TV more conveniently by selecting the corresponding sections. Press

button to enter the HOME screen.

 You can always view the current time at the top of the Home screen.  If your TV is connected to the Internet through a wireless connection, then an icon displayed at the top right corner of the screen.  Manage apps Select the item you want to move, press button to manage.

Search Search the app you want. Inputs Select the input you want. Settings Display the Settings menu. Notifications Allow pop-up notifications to appear for useful information and events that occur with your TV.  Select Notifications on the Home screen, and select Settings then display Advertising, New Arrivals, Warnings And Legal Statements, System Message, from which you can choose the types of notifications you would like to receive. VIDAA Account Sign in your VIDAA account. A VIDAA account gives you all the best feature of your smart TV and always keeps it up to date.

USB OPERATION Plug in your USB device. Press the INPUT button on remote control to open SOURCE list. Then press LEFT/RIGHT/UP/DOWN navigation button to select USB (or Media) and press OK button to enter it.

1. Input the content name you want to play. 2. Arrange the content list by Grid, List. 3. Arrange the content list by Name, Date Modified, Size. 4. Filter the content list by All Media, Photo, Video, Music, Recorded. 5. Create a photo, music, or video playlist. Your TV may support the following file formats : Medium Video Photo Music

Supported File Format .MP4, .MOV, .MPG, .MPEG, .FLV .jpg, .BMP, .PNG, .GIF .MP3, .AAC, .wav

Mirror content from your Android device to the TV.

> Inputs > Screen Mirroring 1. Turn on the casting function of your Android device. 2. Find the TV name in the searching list of your device and select it. 3. Wait for the connection progress to complete and the content on your device will be displayed on the TV. NOTE: Some Android devices may not support casting.

Using Your TV as a Second Monitor

You can use your TV as a computer monitor for playing computer games, watching videos or sharing photos. Connect your TV to a computer using an HDMI cable. NOTE: If your computer has a DVI port (no HDMI port), please use an HDMI-to-DVI cable to make connection.

When the picture is not displayed properly, please follow below steps which may help resolve the problem.  Check that the Black Level is set to Auto. (Go to Picture > Picture Mode Setting > Expert Settings) When connecting your TV to a computer using an HDMI-to-DVI cable, please ensure that the Black Level is set to Boost.  Check that the Contrast Level and/or Colour Saturation are set to 50 or higher.

SPECIFICATIONS TV Broadcasting Receiving Channels Number of Preset Channels Channel Indicator RF Aerial Input Operating Voltage USB Output Audio Output Power (WRMS.) (10% THD) Dimensions DxLxH (with foot) Weight (with foot) Dimensions DxLxH (without foot) Weight (without foot) Surrounding temperature Operating Humidity Standby Mode

PAL, B/G, D/K, I, SECAM ATV (48.25MHz ~ 863.25MHz) 100 (ATV) On Screen Display 75 Ohm (unbalanced) AC 100-240V~50/60Hz ( ~ means alternating current) 5V 500mA ( means direct current) 8W 215 x 957 x 611 mm 6.9 kg 97 x 957 x 557 mm 6.725 kg Operation: 0°C ~ 35°C Storage: 5°C ~ 30°C Less than 80 % RH After 3\4\5 hours

Channel bandwidth DVB-T Modulation DVB-C Video system Sound system Basic functions Max storage channels

Energy efficiency class for standard Dynamic Range (SDR) On mode power demand for Standard Dynamic Range (SDR) Energy efficiency class (HDR) On mode power demand in High Dynamic Range (HDR), if implemented Off mode, power demand, if applicable Standby mode power demand, if applicable Networked standby mode power demand, if applicable Electronic display category Size ratio Screen resolution (pixels) Horizontal and vertical pixels Screen diagonal Screen diagonal Visible screen area Panel technology used Automatic Brightness Control

(ABC) available Voice recognition sensor available Room presence sensor available Image refresh frequency rate (default) Minimum guaranteed availability of software and firmware updates (from the date of end of the placement on the market) Minimum guaranteed availability of spare parts (from the date of end of the placement on the market) Minimum guaranteed product support Minimum duration of the general guarantee offered by the supplier Power supply type

TROUBLESHOOTING Problem The screen does not appear/illuminate.

The screen appears, but there is no sound.

Noise or poor picture

The remote control does not work.

Possible Solution 1. Check that the power plug is securely into the mains socket. 2. Check the power is on. 1. Press the MUTE button. 2. Increase the sound level by pressing the volume adjustment buttons. 3. Check that the sound terminal of your external input is connected properly. 4. Check that the audio cables are connected properly. 5. Select and check any other input. Stop using wireless telephones, hair dryers or other electrical appliances near the TV. 1. Check if the TV is not switched on. 2. Check that the batteries of the remote control are inserted properly. 3. Check for any obstacles between the TV remote sensor and the remote control. Remove them if necessary. 4. If the batteries have no power, replace them with two new batteries off the same type.

DISPOSAL As a responsible retailer we care about the environment. As such we urge you to follow the correct disposal procedure for the appliance and packaging materials. This will help conserve natural resources and ensure that it is recycled in a manner that protects health and the environment. You must dispose of this appliance and its packaging according to local laws and regulations. Because this appliance contains electronic components, the appliance and its accessories must be disposed of separately from household waste when the appliance reaches its end of life. Contact your local authority to learn about disposal and recycling. The appliance should be taken to your local collection point for recycling. Some collection points accept appliance free of charge.

We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. Etablissements Darty & fils © , 9 Rue des Bateaux-Lavoirs, 94200 Ivry-sur-Seine, France