TG2000LCB - Electric grill GORENJE - Free user manual and instructions

Product type	Electric grill
Brand	Gorenje
Model	TG2000LCB
Usage	Household use only
Cooking plates	Removable, non-stick coating, ridged and smooth sides
Drip tray	Detachable, removable
Temperature control	Knob with indicator light (white when powered, red when heating)
Temperature ranges	Low (keep warm), medium (medium cooking), high (quick grilling), very high (searing)
Temperature sensor	Built-in, ensures contact with the plate
Power	Approximately 2000 W (estimated)
Power supply	Mains plug, power cord
Dimensions (W x D x H)	Approximately 50 x 30 x 15 cm (estimated)
Weight	Approximately 4 kg (estimated)
Material	Stainless steel, heat-resistant plastic
Cleaning	Plate and tray washable with warm water and mild detergent; housing wiped with damp cloth
Maintenance	Do not immerse the appliance; unplug before cleaning; wait for complete cooling
Safety	Hot surface (caution symbol), do not use outdoors, not recommended for children without supervision
Spare parts	Frying plate (A), drip tray (H) removable; parts not supplied by manufacturer
Repairability	Contact an authorized center for any repairs; power cable replaceable by a professional
Included accessories	Frying plate, drip tray, control knob, indicator lights
Warranty	Standard manufacturer warranty (check conditions)

Frequently Asked Questions - TG2000LCB GORENJE

How to install the frying plate?

Place the non-stick frying plate (A) on the heat deflector plate (B) and the heating element (D), aligning perfectly. Make sure the temperature sensor (C) touches the plate. Rotate the plate to choose ridged or smooth side according to the food.

How to adjust the temperature?

Use the knob (E) on the right side. Turn counterclockwise to increase temperature. The red light turns on when the element is heating and turns off when the temperature is reached. Settings range from low (keep warm) to very high (searing).

How to clean the grill?

Always unplug and wait for complete cooling. Wash the frying plate (A) and drip tray (H) with warm water and mild detergent. Wipe the housing with a damp cloth. Never immerse the appliance.

Can metal utensils be used?

No, metal utensils can damage the non-stick coating. Use wooden, silicone, or other heat-resistant spatulas.

What to do if the red light does not turn on?

Check that the plug is properly connected and the appliance is powered (white light on). If the problem persists, contact authorized after-sales service.

How to empty the drip tray?

Wait for the grease to cool completely. Carefully remove the removable drip tray (H) and discard the cooled grease. Wash the tray with warm water and mild detergent.

Can the grill be used outdoors?

No, the appliance is designed only for indoor household use. Do not use outdoors.

How to know if the plate is properly positioned?

The grease drainage opening should be at the front. Make sure the plate is aligned with the deflector and the temperature sensor is in contact.

What is the preheating time?

The time depends on the setting: the higher the temperature, the longer the preheating. The red light turns off when the temperature is reached.

How to store the appliance?

Store it clean and dry in a clean, dry place. Do not wrap the power cord tightly, and wait for it to cool completely.

USER MANUAL TG2000LCB GORENJE

INSTRUCTIONS FOR USE

IMPORTANT: BEFORE USING THE APPLIANCE FOR THE FIRST TIME, READ THE INSTRUCTIONS FOR USE CAREFULLY.

FILLING THE ELECTRIC GRIDDLE BEFORE USE

BEFORE USING THE APPLIANCE FOR THE FIRST TIME, REMOVE THE LABEL AND THE PROTECTIVE FILM.

Parts of the appliance:

• Remove the label and the protective film.
• Before using the appliance for the first time, wash the grid (A) and the drip tray (H) with warm water and mild detergent. Dry them thoroughly.
• Place the drip tray (H).
• Place the grid with the non-stick side (A) on the base for heating (B) and the drip tray (D), making sure that the two parts are perfectly aligned with the base (B). It is important that the temperature sensor (C) is in contact with the grid (A). Depending on the food you are cooking,

Turn the grid (A) with the smooth or the ribbed surface facing up.

• On the front part of the grid there is an opening for the drip tray. The opening allows the dripping of the food into the drip tray.
• By turning the left knob of the appliance, adjust the height of the left leg, so that the appliance is well balanced and completely stable on a hard surface that is resistant to high temperatures.
• Place the food you want to cook on the grid (A).
• Plug the power cord into the socket. When the appliance is connected to the power supply, the indicator light (F) lights up. The indicator light will stay on as long as the appliance is connected to the power supply.

• Turn the knob (E) to the desired temperature setting (to increase the temperature, turn the knob in the direction opposite to the movement of the clock hands). When the indicator light (F) comes on, the heating element is heating up.

The temperature settings for different types of food are given in the table below.

TEMPERATURE SETTINGS

Нисka Temпегатура – захранatable за се odржува топла

Среда на Temпегатура – за темелно песене на скара (добpoиск prelimуо)

Виска Temпегатура – за брзо говке на скара с кoeхранatable зааджува соковInterface

MHORY BISOKA Temпегатура – за брзоnotnéкувае

• When the indicator light (F) goes out, it means that the set temperature for cooking has been reached and the appliance is ready for

use.

• The red indicator light (F) indicates that the appliance is heating up; the light stays on until the set temperature is reached. Once the set temperature is reached, the red indicator light turns off and on at intervals, showing that the heating element is maintaining the set temperature at that moment. - The heating time depends on the selected temperature.

The higher the selected temperature, the longer the heating time.

When you have finished cooking, unplug the cable from the socket.

How to use the appliance?

This appliance is intended exclusively for household use.

Before using the appliance for the first time

1. Remove all packaging and any labels.
2. Using a damp cloth or sponge, wipe the grill plate from both sides (top and bottom) to remove any accumulated dust. Rinse the plate with water, then dry it with a soft cloth or paper towel.
3. Place the appliance on a stable surface. Leave enough space between the back of the appliance and the wall, so that the hot air can circulate and the appliance does not overheat the surrounding elements or walls.
4. Turn the temperature control knob (E) to the "OFF" position (turn it in the direction of the clock hands).
5. Plug the device into the wall socket and check that the indicator light (F) comes on. When the device is powered, the indicator light will turn on.
6. Using the temperature control knob (E), select the desired temperature for heating the grill. Then, set the corresponding temperature according to the food you want to cook.
7. Do not use a metal utensil to remove food from the grill, as this could damage the non-stick coating.

Instead, use a wooden spatula or another heat-resistant utensil, preferably plastic or silicone.

1. During cooking, watch out for juices or other liquids that may be difficult to remove once the device has cooled down, and make sure they do not enter the opening between the grill plate (A) and the heat reflector plate (B).
2. Important: The grill plate (A) may emit smoke. Be careful that the smoke does not come into contact with your eyes or face. 10. After use, turn the temperature control knob to the "OFF" position (turn it counterclockwise), unplug the device from the power source, and wait for it to cool down to room temperature before cleaning. 11. Carefully remove the drip tray (H) and dispose of any collected grease before replacing the tray.

Cleaning and care

Important: Never immerse the device, the plug, or the power cord in water or any other liquid. Clean these parts only with a damp cloth. Important: Before connecting or disconnecting the plug, or before cleaning the device, always unplug it and wait for it to cool down completely.

1. Clean the grill plate and the drip tray with a damp cloth and a mild detergent (liquid detergent). Then rinse them with clean water and dry them with a soft cloth.
2. Storage: Store the device in a clean and dry place.
3. Important: Never use the drip tray to carry the device while it is still hot.
4. Important: Do not touch the device while it is still hot or while it is plugged in.
5. Important: Do not wrap the power cord tightly around the device. Do not pull or place heavy objects on the power cord, especially at the point

where it enters the device or where it is connected to the device, as this could damage it.

1. The grill plate and the drip tray can be washed in warm water with a little detergent (liquid detergent). The exterior of the device can be wiped with a damp cloth.

Camo 3a luuha ynompe6a!

TOPEHE

BIVIOCAKYBA MHOY 3AIOBOJCTBO IPIK KOPNCHETO HA BAUINOT ANAPAT.

To 3aIpxkyBame IpaBOTO Ha 6HIO KaKBn H3MeHH.

EN

Save these instructions.

This product is intended for household use only.

Do not immerse this product into water.

Main Functions:

1. Detachable non-stick grill/griddle plates ensure effortless food release and quick clean-up.
2. Detachable grease tray
3. Adjustable temperature control probe with power-on indicator for more precise cooking

Important safeguards

1. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
2. Children shall not play with the appliance.
3. Cleaning and user maintenance shall not be made by children without supervision.
4. Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised.
5. Keep the product and its cord out of the reach of children aged less than 8 years.

6.

Caution, hot surface

When using electrical appliances, basic safety precautions should always be followed, including the following:

Read all instructions.

Do not touch any hot surface. Use handles or knobs.

To protect against electrical shock, do not immerse the cord, plugs or the appliance in water or other liquid.

Close supervision is necessary when any appliance is used by or near children.

Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.

Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or if it is damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment.

Use of accessory attachments not recommended by the appliance manufacturer may cause injuries.

Do not use outdoors.

Do not let the cord hang over the edge of a table or counter, or touch a hot surface.

Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.

To disconnect, remove the plug from the wall outlet.

Do not use this appliance for other than intended use.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Never connect this appliance to an external timer switch or a remote control system in order to avoid a hazardous situation.

The appliance is only to be operated in closed position.

Save these instructions.

This product is intended for household use only.

Do not immerse this product in water.

DO NOT THROW AWAY THESE INSTRUCTIONS.

INSTRUCTIONS FOR USE

IMPORTANT: ALWAYS UNPLUG THE POWER CORD FROM THE ELECTRICITY

MAINS BEFORE FITTING OR REMOVING SINGLE ATTACHMENTS OR

BEFORE CLEANING THE APPLIANCE.

Parts of the appliance:

• Remove all packing material and any labels.
• Before using the appliance for the first time, wash the griddle (A) and the drip tray (H) with hot water and a mild detergent (washing-up liquid). Dry both parts thoroughly.
• Install the drip tray (H).
• Install the griddle with non-stick coating (A) over the heat deflector plate (B) and the heater (D), making sure both are perfectly aligned with the plate (B). It is important that the temperature sensor (C) is in contact with the griddle (A). Rotate

the griddle (A) so that either the ribbed or the smooth part are facing up – depending on the type of food you are grilling.

• Note the fat drain opening on the front part of the griddle. The opening allows unimpeded draining of fat onto the drip tray.
• Rotate the left knob on the appliance to set the height of the left foot, so that the grill is supported and completely stable on a solid and high-temperature-resistant surface.
• Place the food you wish to grill onto the griddle (A).
• Insert the plug into the electrical outlet. If the appliance is powered, the white indicator light (F) will be lit. The white indicator light will be on as long as the appliance is connected to the power mains.

• Use the dial on the right side of the appliance (E) to set the desired operating power (to increase the temperature, rotate the dial counter-clockwise). When the heater (D) is heating the griddle, the red indicator light (F) will be lit.

A variety of settings is provided in the table below for guidance.

TEMPERATURE SETTINGS

Low temperature – to keep the food warm

Medium temperature – for thorough grilling (well-done)

High temperature – for quick grilling that keeps the juices in the food

Very high temperature – for quick searing

• When the red indicator light (F) goes off, this means that the grilling temperature has been reached and that the grill is ready for use.
• The red indicator light (F) indicates that the grill is heating up, and it will remain lit until the grill reaches the set temperature. Once the set temperature is reached, the red indicator light will switch on and off periodically, indicating whether the heater maintaining the set temperature is currently operating.
• Pre-heating time depends on the selected temperature setting. The higher the selected temperature, the longer the pre-heating time.

When you are done grilling, remove the plug from the outlet.

How to use the appliance?

This appliance is intended solely for household use.

Before using the appliance for the first time

1. Remove all packing material and any labels.
2. Use a damp cloth or sponge to wipe the griddle on both sides (ribbed and smooth), removing any dust collected on them. Wipe the griddle dry using a soft cloth or a paper towel.
3. Choose the spot where you will use the appliance. Leave enough room between the back of the appliance and the wall, to make sure the heat radiated by the appliance does not damage the kitchen cupboards or walls.
4. Set the temperature adjustment dial (E) to the off position (rotate it in the clockwise direction).
5. Connect the appliance to the power mains that complies with the specifications on the rating plate or label. When power is supplied to the appliance, the white indicator light (F) will light up.
6. Use the temperature adjustment dial (E) to set a low temperature for pre-heating the griddle. Then, set the appropriate temperature according to the food you wish to grill.
7. Do not use metal utensils to remove fat or food, as these can damage the non-stick coating. Always use a spatula or another heat-resistant accessory made of wood or silicone.
8. During grilling, make sure the juices or other liquids that may be difficult to clean once the appliance cools down do not enter the slot between the griddle (A) and the heat deflector plate (B).
9. Important: Steam can be released from the griddle (A). Be careful and make sure your hands or face are not scalded by the steam.
10. After use, rotate the temperature adjustment dial to the off position (rotate it in the clockwise direction), unplug the appliance, and wait for it to cool down to room temperature before you start cleaning it.
11. Carefully remove the removable drip tray (H) and discard the cooled fat before washing the tray.

Care and cleaning

Important: never immerse the appliance, the plug, or the power cord in water or any other liquid. Only wipe these parts with a damp cloth.

Important: before installing or removing any attachments or before cleaning the appliance, always unplug the appliance and wait for it to cool down completely.

1. Wipe the base and the griddle using a damp cloth and mild dishwashing detergent (washing-up liquid). Then, wipe them dry with a paper towel.
2. Storing the appliance: Store the clean appliance in a clean and dry place.
3. Important: Never remove the removable drip tray to clean it, if the fat in it is still hot.
4. Important: Never store the appliance if it is still hot or connected to the power mains.
5. Important: Do not wrap the power cord tightly around the appliance. Do not pull on the power cord or put it under any strain, especially at the point where it enters or attaches to the appliance, as this could damage it.
6. Griddle and drip tray can be washed in warm water with some detergent (washing-up liquid). Appliance housing may be wiped with a damp cloth.

For personal use only!

GORENJE

WISHES YOU A LOT OF PLEASURE IN USING YOUR APPLIANCE.

We reserve the right to any modifications!

DE

1. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
2. Do not allow children to play with the appliance.
3. Cleaning and user maintenance shall not be made by children without supervision. 4. Cleaning and user maintenance shall not be made by children unless they are aged 8 years and above and supervised. 5. Keep the appliance and its cord out of reach of children aged less than 8 years.
4. Caution, hot surface

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions.
2. Do not touch the hot surfaces. Use the handles for the buttons.
3. To reduce the risk of electric shock, do not immerse the cable or plug in water or other liquids.
4. Extra care is required when the appliance is used near children.
5. Unplug the appliance from the outlet when not in use and before cleaning. Allow the appliance to cool down before putting on or taking off parts and before cleaning.
6. Do not use the electric appliance with a damaged cord or plug, or if the appliance is malfunctioning or has been damaged in any way. Take the appliance to the nearest authorized service center for examination, repair, or adjustment.
7. The use of accessories not recommended by the manufacturer may cause hazards.
8. Do not use the appliance outdoors.
9. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
10. Extreme caution must be exercised when moving the appliance containing hot oil or other hot liquids. 11. To disconnect the appliance, remove the plug from the electrical outlet. 12. Do not use the appliance for other than its intended use. 13. If the supply cord is damaged, it must be replaced by the manufacturer, its authorized service center, or similarly qualified persons to avoid any hazard.
11. Never connect the appliance to an external timer or remote control system to avoid dangerous situations. 15. The appliance must be operated only in the closed position. Keep these instructions. This product is intended for household use only.

Do not immerse the appliance in water.

DO NOT DISCARD THESE INSTRUCTIONS.

INSTRUCTIONS FOR USE

CAUTION: ELECTRICAL SHOCK HAZARD

ELECTRICAL NETWORK, BEFORE PLACING OR REMOVING

UNPLUG THE APPLIANCE BEFORE CLEANING.

Description of the device:

• Remove all packaging material and labels.
• Before using the device for the first time, remove the plug (A) and the oil drip tray (H) with warm water and a mild detergent. Dry well both parts.

- Install the oil drip tray (H). - Install the plug with non-stick coating (A) on the heat-insulating plate (B) and the heating element (D), making sure it is perfectly aligned with the plate (B). It is important that the temperature sensor (C) is in contact with the plate (A). Fasten the plate (A) with the provided screw or smooth surface, depending on the type of food you are grilling. - Pay attention to the oil drain hole in the front part of the plate. The hole allows the oil to drain safely into the designated container. - Close the lid of the device to set the height of the upper heating element, so that the food is well supported and stable on the lower surface, resistant to high temperatures. - Place the food you want to grill on the plate (A). - Connect the device to the electrical outlet. If the device is connected to the power supply, the green indicator light (F) will turn on. The green indicator light will turn on. While the device is connected to the electrical network.

• Use the dial on the right side of the device (E) to set the desired power (to increase the temperature, turn the dial clockwise). When the heating element (D) starts heating, the red indicator light (F) will turn on.

Different settings are shown in the table below.

TEMPERATURE SETTINGS

Нисka Temпегатура - за за се подьрвахранatable топпа

Среда на Temпегатура - за пьлно грипюваце (добpe изpeчесо)

Висoka Temпегатура - за бльрзо грилюваце, koeto зараза3ba cokobete в xphaнatable

Много Висoka Temпегатура - заSBьрзо заличаце

• When the green indicator light (F) turns off, it means that the set temperature for grilling has been reached and the grill is ready for use. - The green indicator light (F) indicates that the grill is heating, and it will remain lit until the grill reaches the set temperature. Once the set temperature is reached, the green indicator light will turn on and off periodically, indicating when the heating element is working to maintain the set temperature.
• The preheating time depends on the selected temperature setting.

The higher the selected temperature, the longer the preheating time.

Connect the appliance to the power supply, except for the contacts.

How to use the appliance?

This appliance is intended for household use only.

Before using the appliance for the first time

1. Remove all packaging material and labels.
2. Wipe the appliance with a damp cloth or a soft sponge to remove any dust accumulated during transport. Dry the appliance with a cloth or paper towel.
3. Choose a place where you will use the appliance. Leave enough space between the appliance and the wall to allow heat to dissipate. Do not place it near kitchen cabinets or walls.
4. Set the temperature control dial (T) to the OFF position (turn it clockwise to the stop). Connect the appliance to a power supply that matches the specifications shown on the rating plate or label. When the appliance is connected to the power supply, the indicator light (F) will illuminate. Use the temperature control dial (E) to set the desired temperature for grilling. Then adjust the temperature according to the food you want to grill. Do not use metal utensils to remove grease or to turn food on the grill, as they may damage the non-stick coating.

Only use plastic or heat-resistant accessories made of wood or silicone.

During grilling, be careful with juices or other liquids that may be difficult to clean. After the appliance has cooled down, do not let water enter between the plate (A) and the heating element (B). Important: Steam may come out of the plate (A). Be careful not to burn your hands or face. After use, turn the temperature control dial to the OFF position (turn it clockwise to the stop), unplug the appliance from the outlet, and wait for it to cool down to room temperature before cleaning. Carefully remove the drip tray for grease (H) and dispose of the cooled grease before cleaning the tray.

Cleaning and maintenance

Important: Never immerse the appliance, power cord, or plug in water or any other liquid. Only wipe them with a damp cloth.

Important: Before installing or removing any parts, and before cleaning, always unplug the appliance from the power supply and let it cool down completely.

1. Wipe the base of the appliance with a damp cloth and mild detergent for dishes (liquid soap). Then dry with a cloth or paper towel.
2. Storing the appliance: Store the appliance in a clean and dry place.
3. Important: Never leave the appliance unattended while in use, so that you can stop it if the appliance is defective.
4. Important: Never store the appliance if it is defective or connected to the power supply.
5. Important: Do not bend the power cord around the appliance. Do not pinch the power cord and do not place any load on it, especially at the point where it enters or connects to the appliance, as this may damage it.
6. The plate and the bowl for the appliance can be washed with warm water and a little washing-up liquid (not in the dishwasher). The appliance housing can be wiped with a damp cloth.

GORENJE

INSTRUCTIONS FOR USE AND INSTALLATION OF THE APPLIANCE.

We reserve the right to make any changes!

CZ

Keep these instructions.

NEVER THROW AWAY THESE INSTRUCTIONS.

INSTRUCTIONS FOR USE

IMPORTANT: BEFORE ATTACHING OR REMOVING INDIVIDUAL COMPONENTS, ALWAYS DISCONNECT THE APPLIANCE FROM THE POWER SUPPLY BEFORE CLEANING.

DISCONNECT THE POWER CORD FROM THE ELECTRICAL OUTLET.

Components:

DO NOT THROW AWAY THIS INSTRUCTION MANUAL.

INSTRUCTIONS FOR USE

IMPORTANT: ALWAYS DISCONNECT THE APPLIANCE FROM THE POWER SUPPLY BEFORE PLACING OR REMOVING ANY ATTACHMENTS, OR BEFORE CLEANING THE APPLIANCE.

Appliance parts:

Immerse the appliance in water.

The main functions of the device are described here.

1. Thanks to the removable parts with non-stick coating, easy removal and quick cleaning are ensured.
2. Remove the bowl.
3. Temperature control sensor with power indicator for precise cooking.

IMPORTANT WARNINGS

1. This appliance can be used by children aged 8 years and above, as well as by persons with reduced physical, sensory or mental capabilities or with a lack of experience and knowledge, provided they are supervised or have been given instructions concerning the safe use of the appliance and understand the dangers involved.
2. Do not allow children to play with the appliance.
3. Cleaning and maintenance of the device may be entrusted to children over 8 years of age under adult supervision.
4. Keep the device and its cord out of reach of children under 8 years of age.
5. Warning! The surface gets very hot!

Do not immerse the device in water.

DO NOT THROW AWAY THIS INSTRUCTION MANUAL.

INSTRUCTIONS FOR USE

IMPORTANT! To disconnect the cord from the power supply, first unplug or remove the attachments from the device.

Device components

• Remove all packaging materials and labels. Before first use, wash the lid (A) and the base (H) with hot water and a mild dishwashing liquid. Dry both parts thoroughly.
• Install the base (H).
• Place the lid with non-stick coating (A) on the plastic deflector (B) and the heating element (D). Make sure that the edges of both parts fit into the grooves (B). It is important to ensure contact of the temperature sensor (C) with the lid (A). The lid can be installed either with the ribs facing up or down.

The upper limit corresponds to the type of products that need to be heated.

• The heating time depends on the selected temperature mode.

The higher the set temperature, the more time is needed for heating.

After heating, remove the plug from the socket.

Using the device

This device is intended for household use only.

Before first use of the device

1. 3. Clean the appliance with a damp cloth or sponge.
2. Wipe the appliance from both sides (smooth and ribbed) with a damp cloth or sponge. Wipe the appliance dry with a soft cloth or paper towel.
3. Choose a place where the appliance will be used. Leave enough space between the wall and the back of the appliance so that the heated body does not damage the wall or the wall covering.
4. Set the temperature regulator (E) to the "OFF" position (turning it clockwise). 5. Connect the appliance to a power supply that matches the characteristics specified on the nameplate or label. After connecting to the power supply, the indicator light (F) will turn on.
5. Using the temperature regulator (E), set the temperature to heat the appliance. Then set the temperature at which you need to cook the product on the grill.
6. When removing or turning food, do not use metal kitchen utensils, as they may damage the non-stick coating. Use a wooden spatula or heat-resistant plastic accessories made of wood or plastic.
7. During cooking, make sure that no other liquids that are difficult to remove get into the gap between the appliance (A) and the front part of the deflector (B), especially when the appliance is hot.
8. Important! The appliance (A) may heat up. Be careful not to touch it with your hands or body during operation. 10. After using the appliance, set the temperature regulator to the "OFF" position (turning it clockwise).

Disconnect the device from the mains and let it cool down to room temperature before cleaning it.

11. Carefully remove the plug (H) from the socket and let the device cool down.

Cleaning and maintenance

Important! Never immerse the device, cord, or plug in water or any other liquid. Wipe these parts with a damp cloth.

Important! Before cleaning the device, removing or installing any accessories, always disconnect the device from the mains and let it cool down completely.

1. Wipe the housing and accessories with a damp cloth with a mild cleaning agent (dishwashing liquid), and then dry them thoroughly with a towel.
2. Store the device clean and dry in a dry place.
3. Important! Do not remove the plug from the socket until the device has cooled down.
4. Important! Do not place the device on a surface that is hot or near a power outlet.
5. Important! Do not wrap the cord around the device. Do not pull the cord and do not allow it to hang, especially at the connection point with the device, to prevent damage.
6. The accessories and the plug can be washed in warm water with a mild cleaning agent (dishwashing liquid). The housing of the device can be wiped with a damp cloth.

Only for household use!

The GORENJE company wants you to get maximum satisfaction from using this device.

We reserve the right to make changes!

Keep these operating instructions.

The appliance is intended for household use only.

Do not immerse the appliance in water.

Main functions

Safety precautions

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Do not immerse the appliance in water.

Keep these instructions.

Operating instructions

IMPORTANT! ALWAYS DISCONNECT THE APPLIANCE FROM THE POWER SUPPLY BEFORE REMOVING AND INSTALLING PARTS AND BEFORE CLEANING.

Description of the appliance

• Remove the transport packaging and stickers from the appliance. Before first use, wash the hot plate (A) and the drip tray (H) thoroughly with hot water and mild detergent. Dry completely.
• Install the drip tray (H).
• Place the hot plate with non-stick coating (A) on the base (B) or on the heating element (D). Check that it fits well against the base (B). It is important that the temperature sensor (C) touches the hot plate (A). Depending on the selected

For food preparation, turn the hot plate with the ribbed or smooth side up.

• Install the drip tray so that the drain opening for the tray is turned towards the front edge of the appliance and the liquid flows into the drip tray.
• Turn the left knob to adjust the height of the left foot so that the appliance stands level. Place the appliance on a firm, stable surface that is resistant to high temperatures. -For preparing food on the hotplate (A).
• Insert the plug of the power cord into the socket. When the power is supplied, the indicator lamp (F) lights up. The indicator lamp stays on as long as the appliance is connected to the power supply.

The higher the selected temperature, the longer the heating.

Important! Before cleaning and before moving the appliance, disconnect it from the power supply by pulling the plug out of the socket, and let it cool down.

1. Wipe the base and the drip tray with a damp cloth with a little mild detergent. Wipe the surface with a damp cloth and then with a dry towel.
2. Storing the appliance. Store the clean appliance in a clean, dry place.
3. Important! Never remove the drip tray while the appliance is still hot.
4. Important! Never put the appliance into storage while it is still hot and connected to the power supply.
5. Important! Do not wind the cord tightly around the device. Do not pull or carry the appliance by the cord, as the cord may be damaged.
6. The drip tray and the hotplate can be washed in warm water with a little mild detergent. Wipe the base of the appliance with a damp cloth.

For household use only!

GORENJE

WE HOPE THAT USING THE DEVICE WILL BRING YOU PLEASURE!

THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES!

Keep these instructions.