EDEN 900 - ROBLIN - Free user manual and instructions

USER MANUAL EDEN 900 ROBLIN

1. SAFETY INFORMATION • Connect the extractor to the

exhaust flue through a pipe of

For your safety and corminimum diameter 120 mm. rect operation of the The route of the flue must be appliance, read this manual as short as possible. carefully before installation and use. Always keep these instruc- • Regulations concerning the discharge of air have to be fulfilled. tions with the appliance even if you move or sell it. Users must • Do not connect the extractor hood to exhaust ducts carrying fully know the operation and combustion fumes (boilers, firesafety features of the appliance. places, etc.). The wire connection has to • If the extractor is used in conbe done by specialized junction with non-electrical technician. appliances (e.g. gas burning • The manufacturer will not be appliances), a sufficient degree held liable for any damages of aeration must be guaranteed resulting from incorrect or imin the room in order to prevent proper installation. the backflow of exhaust gas. • The minimum safety distance When the cooker hood is used between the cooker top and in conjunction with appliances the extractor hood is 650 mm supplied with energy other than (some models can be installed electric, the negative pressure in at a lower height, please refer the room must not exceed 0,04 to the paragraphs on working mbar to prevent fumes being dimensions and installation). drawn back into the room by • If the instructions for installathe cooker hood. tion for the gas hob specify a • The air must not be discharged greater distance, this must be into a flue that is used for exrespected. hausting fumes from appliances • Check that the mains voltage burning gas or other fuels. corresponds to that indicated • If the supply cord is damaged, it on the rating plate fixed to the must be replaced from the maninside of the hood. ufacturer or its service agent. • Means for disconnection must • Connect the plug to a socket be incorporated in the fixed complying with current regulawiring in accordance with the tions, located in an accessible wiring rules. place. • For Class I appliances, check • With regards to the technical that the domestic power supply and safety measures to be guarantees adequate earthing. adopted for fume discharging 8

unless they have been given it is important to closely follow supervision or instruction. the regulations provided by the local authorities.

Accessible parts may become hot when used with WARNING: Before installing cooking appliances. the Hood, remove the protective films. Use only screws and small parts • Clean and/or replace the Filters in support of the hood. after the specified time period (Fire hazard). See paragraph WARNING: Failure to install Care and Cleaning. the screws or fixing device in accordance with these • There shall be adequate ventilation of the room when the instructions may result in range hood is used at the same electrical hazards. time as appliances burning gas Do not look directly at the light or other fuels (not applicable to through optical devices (binocappliances that only discharge ulars, magnifying glasses…). the air back into the room). Do not flambè under the range • The symbol on the product hood; risk of fire. or on its packaging indicates This appliance can be used that this product may not be by children aged from 8 years treated as household waste. and above and persons with Instead it shall be handed reduced physical, sensory or over to the applicable colmental capabilities or lack of exlection point for the recycling perience and knowledge if they of electrical and electronic have been given supervision or equipment. By ensuring this instruction concerning use of the product is disposed of correctly, appliance in a safe way and unyou will help prevent potential derstand the hazards involved. negative consequences for Children shall not play with the the environment and human appliance. Cleaning and user health, which could otherwise maintenance shall not be made be caused by inappropriate by children without supervision. waste handling of this product. Children should be supervised For more detailed information to ensure that they do not play about recycling of this product, with the appliance. please contact your local city The appliance is not to be used office, your household waste by persons (including children) disposal service or the shop with reduced physical, sensory where you purchased the or mental capabilities, or lack product. of experience and knowledge, 9

• The extractor hood has been designed exclusively for domestic use to eliminate kitchen smells.

• Never use the hood for purposes other than for which it has been designed. • Never leave high naked flames under the hood when it is in operation. • Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides. • Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames.

3. CARE AND CLEANING

-- TheActivated charcoal filter is not washable and cannot be regenerated, and must be replaced approximately every 4 months of operation, or more frequently for particularly heavy usage (W).

-- The Grease filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher (Z).

• Clean the hood using a damp cloth and a neutral liquid detergent.

A Press the button to activate the keyboard and all the lights come on at half intensity. If the keyboard is not used for approximately 15/30 seconds it returns to Stand-by. Press briefly to turn the motor Off. B Activates speed one.

C Press and hold the button for approx. 2 seconds to Flashing

Activate/Deactivate the motor in 24h Air Circulation mode, a speed that allows ducting for 10 minutes every hour, for a 24 hour cycle. Cannot be activated if Intensive mode is active. It is also deactivated when the motor is turned Off. Activates speed two. On/Off Activates speed three.

Activates Intensive speed. This speed is timed to run for 6 minutes. At the end of this time the system will automatically return to the speed set before.

It is disabled by pressing the Button or turning the Motor off. Activates Delay mode, causing automatic shutdown of the Motor and the Lighting system with a 15 minute delay. It is disabled by pressing the button. Press briefly to turn the lighting system on and off at maximum intensity. Press and hold the button for 2 seconds to turn the Lights on at intermediate intensity. With the filter alarm triggered, press the button to Reset the alarm. All the Leds will flash 3 times.

When the procedure terminates, the indication shown previously turns off:

C+H Flashing Indicates that it is necessary to wash the metal grease filters. The alarm is triggered after the Hood has been operating for 100 working hours. D+H Flashing Indicates that it is necessary to change the activated charcoal filters and wash the metal grease filters at the same time. The alarm is triggered after the Hood has been operating for 200 working hours. Press and hold the button for approximately 2 seconds, All the Leds flash 2 times. with all the loads turned off (Motor and Lights), to turn the Activated Charcoal Filter alarm on. To turn it off, press and hold the button again for 2 All the Leds flash 1 times. seconds.

• For replacement contact technical support

(“To purchase contact technical support”).

COMMERCIAL GUARANTEE AND GUARANTEE FOR AFTER SALES SERVICE COMMERCIAL GUARANTEE The commercial guarantee provided by FRANKE FRANCE SAS for products of the ROBLIN brand is limited to distribution professionals. It is applicable in continental France, Corsica and the DOM-TOM

(French overseas departments and territories). The commercial guarantee is a guarantee of 2 years for parts (excluding labour and travel expense). It applies starting from the billing date for the equipment to the consumer, provided that this occurs in the 12 months following the date of sale by ROBLIN to the Customer. In order to satisfy the consumer at the time of any intervention by the after-sales service department, the Customer agrees to direct it to the service put in place by ROBLIN in order to organise the service intervention as quickly as possible. The after-sales service department may be contacted at the following number: 04 88 78 59 93. The items to be provided to the ROBLIN after-sales service department are: - A description of the malfunction observed - The commercial reference of the product and its serial number - A copy of the purchase invoice of the consumer and his contact information. This guarantee applies to any technical or functional problems. The following are excluded from the commercial guarantee: - Breakdowns related to accessories or consumables (filters, bulbs…), - Damage, malfunctions or defects attributable to external causes, - Damage due to corrosion, improper connection or feed, - Damage due to non-respect of the instructions provided by ROBLIN (installation, assembly…), - Breakdowns resulting from modification of the construction and characteristics of equipment of the ROBLIN brand, - Breakdowns and damage occurring after use of spare parts which do not correspond to those provided originally by ROBLIN, or due to an absence of maintenance, - Breakdowns resulting from professional or commercial use of the equipment. AVAILABILITY OF SPARE PARTS In application of article R 111-3 of the Consumer Code, for products placed on the market starting from 1 March 2015, ROBLIN guarantees the availability of the spare parts necessary for use of its Products for a period of 10 years following purchase of the product by the consumer, with the invoice being deemed as proof, provided that dated within the 12 months following the date of sale by ROBLIN to the Customer.

1. SICHERHEITSINFORMATIONEN