EASY 150 - Phone SAGEM - Free user manual and instructions

USER MANUAL EASY 150 SAGEM

Line drawing of a mechanical device with a square base and circular top component (no text or symbols)

User guide Livret d'utilisation Bedienungsanleitung Manual del usuario Manuale dell'utente Gebruiksaanwijzing

1 WELCOME 1
2 DISCOVER YOUR PHOTO EASY 155 PRINTER 2
3 PREPARE YOUR PHOTO EASY 155 PRINTER 3

Connect the mains supply 3

First ribbon installation 4

To change the ribbon 5

Loading paper 6

4 PRINTING FROM A MEMORY CARD 7

Insert a memory card 7

5 USER INTERFACE 9

Print your photographs 10

Rapid printing 10

Example of rapid printing from a memory card 11

Create a contact sheet (index) 13

Prepare a series of photographs for printing (shopping

trolley mode) 14

Print from a camera (PictBrigde mode) 16

Print in DPOF (Digital Print Order Format) mode 17

Printing from a GSM mobile phone camera 18

Print starting from a bluetooth peripheral (optional) 19

Print from a PC (Personal Computer) 21

6 REPLACEMENT OF CONSUMABLES 23
7 MAINTENANCE 24

Cleaning the print head 24

Paper jam 25

Problems 26

Error messages 27

Technical data 29

8 GARANTEE 30

1 WELCOME

You have just acquired a SAGEM PHOTO EASY 155 printer, and we thank you for choosing our product. With this high quality printer you can get the most out of your digital photos. In a few simple steps you can produce photo prints identical to those from a professional developer, for your personal use or to share with friends and family.

The easy-to-follow steps in this user guide will walk you through:

1. Switching on your PHOTO EASY 155 printer
2. Printing photographs stored on a memory card
3. Printing photographs transferred from a camera in a GSM mobile phone
4. Installing the image processing software and printer driver on a PC
5. Maintenance and troubleshooting of your PHOTO EASY 155 printer

The CD-ROM included with your kit contains an additional guide with instructions for using the image processing software and printer driver on your PC.

Safety instructions and recommendations

CE

• Do not install your PHOTO EASY 155 printer in a humid room (bathroom, laundry, kitchen, etc.), or within 1.50 m of a tap or water source, or outside. The printer should be operated within an ambient temperature range of 10 °C to 35 °C.
• Do not install your printer in a location where there is a noticeable amount of dust floating in the air. Such dust can degrade the print quality of your photos.
• Only the power supply provided with the printer should be used. Connect this to the mains in accordance with the installation instructions in this user guide and the information on the identification label affixed to the power supply (voltage, current, mains frequency). As a precaution, in case of danger, the mains adapters act as a disconnecting mechanism for the 230V power supply. They should be placed near the device and should be easily accessible.
• Never open the cover of the film cartridge compartment during printing. This could break the film and cause printer malfunction.
• Only use SAGEM consumables, if not you are likely to damage the equipment and invalidate the guarantee. To obtain the references of the consumables (Refer to paragraph Replacement of consumables, page -23).
• The CE marking certifies that the product meets the main requirements of the European Parliament and Council directive 1999/5/CE on telecommunications terminal equipment, regarding safety and health of users, and regarding electromagnetic interference.

The declaration of compliance can be consulted on the site www.sagem.com category "support", or can be requested at the following address:

SAGEM SA - Customer relations department

Place the box in front of you, open the packaging and check that you have received the items listed below:

1 PHOTO EASY 155 printer
2 User manual
3 CD-ROM with its applications
4 Film cartridge *
5 Photo paper (2 packs of 20 sheets)*
6 USB cable
7 Paper tray
8 Power supply unit
9 Mains cable
10 xD card adapter

Diagram showing ten labeled components of a device model, including a CD, DVD, and cable assembly with numbered labels.

3 PREPARE YOUR PHOTO EASY 155 PRINTER

CONNECT THE MAINS SUPPLY

Remark:

When installing your printer near a wall or some other object, keep an open space of at least 4 inches at the back of the printer, to make sure the movement of the sheet of paper being printed is not obstructed.

Please refer to the safety instructions at the beginning of this user guide before making any connections.
Insert one end of the mains lead into the corresponding socket of the power supply.
Connect the power supply to the printer as shown in the illustration below.

Diagram showing cable connection to a device with labeled components A and B, including cable routing and wiring.

Plug the other end of the power supply mains lead into a wall socket.
Switch on the printer by pressing the "I" on the on/off switch located at the back of the printer. The green light comes on and three lines are displayed on the screen.
Your printer features a SCSI Mass storage master USB connector (A) and a slave USB connector (B). The latter is used for connection with a master terminal (PC, etc.).

Remarque : To obtain the list of devices compatible with this USB port (A), visit the site www.sagem.com.

FIRST RIBBON INSTALLATION

Remarque

: Use DSR400 or DSR400T consumables only. These are specially designed to provide you with optimum print rendering.

Switch on the printer. Wait 10 seconds for the printhead to lift, then:

1. Open the external flap located on the right-hand side of the printer.
2. Remove the protective foam.
3. Take the new ribbon out of its packaging and make sure that the film is stretched after removing the card (A).
4. Install the ribbon in the position shown in the illustration below.
5. Lift the locking lever and push in the film cartridge until it touches the back of the compartment the locking lever must be locked after insertion.
6. Close the external flap.

1

Line drawing of a hand holding a device with a scroll wheel (no text or symbols)

2

Diagram of a robotic device with directional arrows indicating movement or force (no text or symbols)

3

Diagram showing hands holding a device with an arrow indicating direction, labeled with point A

4

Line drawing of a mechanical device with a circular top and rectangular base (no text or symbols)

5

CLIC!

6

Line drawing of a hand inserting a device into a box (no text or symbols)

Warning - Never touch the film cartridge with your fingers. Make sure the cartridge is completely inserted into the printer. Check that the green locking lever is correctly lowered.

Remarque

: In the event of any difficulty, check that there are no foreign objects in the film cartridge compartment.

TO CHANGE THE RIBBON

Remarque

: Use DSR400 or DSR400T consumables only. These are specially designed to provide you with optimum print rendering.

For this purpose, the printer must read the chip card delivered with each consumable kit after any new kit installation.

Switch on the printer. Wait 10 seconds for the printhead to lift, then:

1. Take the SIM card delivered with the ribbon and the photo paper. Insert it in the drive located on the front panel of the printer. The SIM card is identified and read by the printer. At the end of the procedure, "40 or 120" is displayed on the screen.
2. Remove the SIM card.
3. Take the new ribbon out of its packaging and make sure that the film is stretched after removing the card (A).
4. Open the external flap located on the right-hand side of the printer.
5. Lift the locking lever and remove the used ink ribbon.
6. Install the ribbon in the position shown in the illustration below.
7. Lift the locking lever and push in the film cartridge until it touches the back of the compartment the locking lever must be locked after insertion.
8. Close the external flap.

Remark:

If this last operation is not carried out, you will not be able to use the printer.

Line drawing of a device with a label pointing to it, no text or symbols present

2 P3

③ A

Line drawing of a hand holding a device with a circular button and pointer (no text or symbols)

⑤ 1 2

Line drawing of a computer mouse with a circular head and attached clip (no text or symbols)

7 CLIC!

Line drawing of a hand holding a closed book with a pencil, no text or symbols present

Warning - Never touch the film cartridge with your fingers. Make sure the cartridge is completely inserted into the printer. Check that the green locking lever is correctly lowered.

Remark:

In the event of any difficulty, check that there are no foreign objects in the film cartridge compartment.

LOADING PAPER

1 - Pull the paper tray out of the printer.
2 - Open a pack of paper with the protection sheet on the top, insert it in the paper tray, making sure the rectangle reserved for postage stamps is on the outside of the tray, that is, towards you.
3 - Remove the protection sheet.
4 - Line up the tray with its compartment and push it in slowly until the locking system clicks.

Warning - handle paper sheets by their pre-cut edges, never allow your fingers to come into contact with the shiny surface before printing.

Your SAGEM PHOTO EASY 155 printer is now ready to print your digital photographs.

Warning - protect consumable items against prolonged exposure to light, humidly, heat and dust. Respect the operation conditions set out (Refer to paragraph Technical data, page -29). Only use SAGEM brand consumable items designed for this printer. Make sure that a previously printed photograph has not been slipped inadvertently into a packet of blank pages; this could damage the ribbon of your printer.

Warning - Make sure that a previously printed photograph has not been slipped inadvertently into a packet of blank pages; this could damage the ribbon of your printer.

4 PRINTING FROM A MEMORY CARD

Your SAGEM PHOTO EASY 155 printer is designed to be used with or without a computer. This chapter describes printer operation without a computer.

Refer to the technical data table at the end of this user manual to check whether your memory card is compatible with the printer. In the event of incompatibility, use a computer and the image processing software supplied on the CD-ROM.

Warning - Small sized images, less than 80,000 pixels, cannot be printed from memory cards (for example: an image size 320 x 240, equivalent to 76,800 pixels, will not be included in the index). On the other hand, these photographs may be printed from a PC or by means of a wireless IR link (or Bluetooth optional equipment).

INSERT A MEMORY CARD

Insert your memory card into the corresponding slot, as shown in the illustrations below. Into the case of a xD card, introduce initially the adapter provided into the left slit then insert the card in the adapter.

Warning - SmartMedia, CONTACTS FACING UPWARDS.

Warning - The memory cards do not enter fully in the reader slot. DO NOT USE FORCE UNDER ANY CIRCUMSTANCES.

If a card does not enter properly, remove it and check that you are introducing it in the correct slot and with the right orientation.

Slot compatible with Compact Flash format Slot compatible with Smart Media (SM), Memory Stick (MS), Standard Digital (SD) Multi Media Card (MMC) formats or XD card with its adapter

Warning - Printing of picture by ascending order relatively to the date of the pictures on the memory board will be achieved if parameters "dates and hour" have been set on your camera before the catch of pictures. Otherwise pictures will be read and printed in a random order.

Card	Slot	Location
Smart Media (SM)	Left
Memory Stick (MS)	Left
Standard Digital (SD)	Left
Multi Media Card (MMC)	Left
xD card with its adapter	Left
CompactFlash	Right

5 USER INTERFACE

1 - Add a selection to the shopping trolley ^1
2 - Select the number of copies per photograph (between 1 and 20)
3 - Go to the previous photograph number (..., 3, 2, 1)
4 - Start printing
5 - Go to the next photograph number (1, 2, 3...)
6 - Select the print format
7 - Cancel
A - Number of copies to be printed
B - Number of the active photo
C - Number of sheets that will be printed
D - Print format
E - Shopping trolley mode
F - Active photograph in the shopping trolley
G - Paper error
H - Ribbon error
I - Consumable card icon (SIM)

888×88 DPOF 888 A F B C D E H G I SAGEM 888×88 DPOF 888 Photo Easy 150 - Personal Photo Printer ① ② ③ ④ ⑤ ⑥ ⑦

PRINT YOUR PHOTOGRAPHS

Your printer is switched on, and you have inserted a memory card, or you have transferred photographs from a GSM mobile phone camera using the IR (infrared) link (or Bluetooth optional equipment).

The green light blinks while data are being transferred to the printer. After a few seconds, the number of photographs found on the memory card or in the digital camera, or transferred from the GSM mobile phone camera, is displayed on the screen. The light stops blinking.

Your photos are printed in four stages. The printer first prints the three colours: yellow, magenta and cyan in that order, then deposits a protective film on the sheet of papier, and finally ejects the photo.

The colour of the light shows the printer status:

Steady green: printer ready, on standby,

Blinking green: data being tranferred,

Steady red: incident: refer to the end of this user guide.

Remark:

To enable you to handle your photographs under the right conditions, the size of the sheets of paper is greater than the printed surface and the two lateral edges are pre-cut.

After printing, do not tear these edges abruptly, fold along the dotted line several times and then gently tear off the edges.

Tips - The edges can be removed on a number of photos at a time by superimposing them on each other.

RAPID PRINTING

Select the number of the photograph required using the

keys.

Press the ✗ key to set the number of copies.

Press the key to select print format.

You may select a predefined format to print the photographs:

- Print your photograph in format 10 x 15 cm full page, no border ☐.

- Print your photograph in format 10 × 15 ~cm with a white border.

- Print your photograph in format 10 × 13 ~cm □.

- Print 2 photographs per page ☐ ☐.

- Print 4 photographs per page

- Print 20 photographs per page (contact sheet or index)

Once the selection is made, press the key to start printing.

If printing is interrupted due to a lack of paper, paper jam or empty film cartridge, the printing operation may be restarted where it was interrupted by pressing the key after the necessary replacement or defect correction is performed.

Idea - Using the pre-printed reverse side postcard you can quickly send your photograph to friends, family, etc.

Tips - Hold the C key down for 3 seconds to reinitialise the printer and return to the default status, such as when inserting a card.

EXAMPLE OF RAPID PRINTING FROM A MEMORY CARD

The memory card contains 23 photographs. We want to print photograph number 3, 4 times on the same sheet of paper.

Put the On/Off switch to "I".

Insert the memory card into the correct printer slot.

After the analysis and recognition phase, the number of valid photos is displayed on the screen and the green LED comes steady on.

23x 1

Select photograph 3, using the + key.

3x 1

Press the × key until the figure 4 is displayed (that is 4 copies).

3×4 4

Press the ☐ key until the 4 images/page graphic is selected.

3× 4 1

The figure 1 should be displayed as the number of sheets necessary for the printing operation.

Press the 🔍 key to start printing.

CREATE A CONTACT SHEET (INDEX)

After inserting the memory card, the number of valid photos is displayed on the screen..

23x 1

Press the + key until ALL is displayed on screen.

ALL 23

Select the format photographs per sheet format using the key.

ALL × 1 2

In the example provided above, 2 sheets will be necessary to print 23 photographs.

Press the he key to initiate printing.

Idea - The contact plate is a simple way of displaying all the photographs on your memory card; choose those to be printed using the number assigned to each of them

PREPARE A SERIES OF PHOTOGRAPHS FOR PRINTING (SHOPPING TROLLEY MODE)

After inserting the memory card, the number of valid photos is displayed on the screen..

23x 1

This example describes how to print 4 copies of photograph 3, 1 copy of photograph 8 and 2 copies of photograph 16.

Remark: Printing format remains fixed for series printing.

Select photograph 3, using the + , key; press the *key until the figure 4, corresponding to the quantity desired, is displayed.

3×4 4

Press the 📁 key to add the photograph to the "shopping trolley" (the series). The icon indicating that the active photograph is in the shopping trolley is displayed, as well as the shopping trolley mode icon to indicate the presence of photographs in the shopping trolley.

Select photograph 8, using the + key, press key to add this to the shopping trolley (the default number of copies is 1).

8x 2

Select photograph 16, using the + key, press * key until the figure 2, corresponding to the desired number of copies, is displayed.

16×2 7

Press the key to add this to the shopping trolley.

The number of sheets required is displayed to the left of the shopping trolley icon. Press the key to start printing.

Remark:

If you notice that you have made an error after having validated the selection with the key, press the key again to cancel and redo the selection. This cancels only the most recent selection. It is also possible to deselect all photographs by selecting ALL using the + key and pressing the key twice.

Tips - To rapidly add a series of consecutive photographs to the shopping trolley, select the photograph with the lowest number and press and hold down the shopping trolley key.

Photographs will be automatically added to the shopping trolley one by one until the shopping trolley

is released.

PRINT FROM A CAMERA (PICTBRIGDE MODE)

Your printer PHOTO EASY 155 SAGEM supports the standard PictBrigde, it thus allows the impression of photographs starting from cameras compatible with this standard.

Read the documentation of the camera to check compatibility with the PictBrigde standard and to check the connection with the printer.

Your SAGEM PHOTO EASY-155 printer supports the following functions:

Printing a photo.
Selecting photos and printing them several times on the same paper.
Printing from a DPOF-standard file.
Monitoring printing and especially the beginning, progress and end of the printing process. Also, error messages likely to occur (no paper, paper jam, no ink, cover not closed, no cartridge, fatal error).

Your SAGEM PHOTO EASY-155 printer does not support the following functions:

Image cropping.
Choosing a type of paper.
Providing additional data (for example, date and time), in addition to the photo to be printed. Improving print quality or image.

Start PictBrigde mode printing

Check that camera is set up in PictBrigde mode.
After the analysis and recognition phase, the following screen appears

d5c

The print is launched automatically, the green light is flashing.
To leave PictBridge mode withdraw USB cable.

PRINT IN DPOF (DIGITAL PRINT ORDER FORMAT) MODE

This function lets you select the photographs to be printed on your camera, then print them on the SAGEM PHOTO EASY 155 printer from a memory card. Your camera must comply with the DPOF (Digital Print Order Format) standard. Refer to your camera documentation to find out if it is compatible with this standard.

Select the required photographs on the camera (follow the instructions in the documentation of your camera).

Remove the memory card from the camera and insert it into the correct slot of your SAGEM PHOTO EASY 155 printer. This starts the data transfer. The DPOF logo on the printer screen is activated and the number of printable photographs is displayed in the lower left-hand corner of the screen.

Warning - Example: memory card that contains 15 photographs selected for printing.

15 DPOF

Start printing by pressing the key.

To exit DPOF mode, press the key.

To switch back to DPOF mode, press and hold the c key down for 3 seconds.

PRINTING FROM A GSM MOBILE PHONE CAMERA

Photographs taken with a GSM mobile phone equipped with a camera can be printed on the SAGEM PHOTO EASY 155 printer. To do this, the photographs need to be transferred to the printer via an IR (infrared) link between the 2 devices.

Switch on the SAGEM PHOTO EASY 155 printer (press "I" on the on/off switch).

Tips - GSM mobile phones with cameras work on low definition ; for a better quality of print we suggest you print 2 or 4 photos per sheet.

Place your GSM mobile phone opposite the SAGEM PHOTO EASY 155 printer so that the IR "windows" are facing each other and are not more than 30 centimetres apartPlace your GSM.

Warning - In an environment exposed to intense light, a distance of not more 10 centimetres between the two infrared windows is recommended.

Line drawing of a mobile phone connected to a CD and an open case, with signal waves indicating wireless communication (no text or symbols present)

Select a photograph on your GSM mobile phone and start the IR ink transfer.

The message "Ir" blinks on the printer screen throughout the transfer operation.

1,-

When the transfer is complete, the following information is displayed on the screen:

1/x, -

You can now:

• Start printing the transferred photograph, after setting the print format and number of copies if required.
• Transfer another photograph from your GSM mobile phone camera, which will be added to those already stored in the printer. At the end of each transfer, the total number of photographs stored is displayed on the printer screen (the one with the highest number being the last one transferred).
• The same operations as described in the previous chapters can now be performed before starting to print the photographs: (selecting the photographs to be printed, selecting the format, selecting the number of copies).

After all photographs transferred from your GSM mobile phone camera have been printed, the SAGEM PHOTO EASY 155 printer screen displays the information that was on the screen just before you started the print job.

You can now:

• Start another print job, after selecting different parameters (photograph number, format, number of copies) if required.
• End the transferred photograph processing. To do this, hold the C key down for 2 seconds.

PRINT STARTING FROM A BLUETOOTH PERIPHERAL (OPTIONAL)

The adapter of Bluetooth (optional equipment) printer is a fast and effective solution to pass from a telegraphic connection to a connection without wire.

The adapter makes it possible to transform printing SAGEM PHOTO EASY 155 into Bluetooth receiver thus authorizing equipment equipped with technology Bluetooth like the personal assistants, the office computers, portables or others the impression of photographs.

Ensure that all hardware units are powered. Never force installation of connectors on hardware, as the cable and the connector could be damaged.

Connect the Bluetooth adaptor (optional equipment) to the USB port (A) of your SAGEM PHOTO EASY-155 printer.

A

Identification among hardware units is automatic.

Warning - The size of the photo or photos to be transferred to the SAGEM PHOTO EASY-155 printer must be less than 600 Kbytes. The photo format required is the JPEG format. An error message "Err 75" will be displayed when the maximum storage capacity is reached.

To transfer new data to the SAGEM PHOTO EASY-155 printer, you must clear the memory. To do this, press and hold the key for some time C.

The message "bt" blinks on the printer screen throughout the transfer operation.

bf

When the transfer is complete, the following information is displayed on the screen:

1×6+1

You can now:

• Start printing the transferred photograph, after setting the print format and number of copies if required.
• Transfer another photograph, which will be added to those already stored in the printer. At the end of each transfer, the total number of photographs stored is displayed on the printer screen (the one with the highest number being the last one transferred).

PRINT FROM A PC (PERSONAL COMPUTER)

Your kit includes an installation CD-ROM containing a printer driver, image processing software.

Make sure that your PC is compatible with the requirements as specified :

PC configuration required:

Pentium or equivalent,

OS : Windows 98 SE / 2000 / Me / XP,

128 MB DRAM or more,

150 MB available on hard disk,

USB port available.

Install the software

The SAGEM PHOTO EASY 155 software is installed in three steps: running the Install program, restarting the computer, and performing the final printer installation.

Do not connect the printer to the PC before installing the printer driver. After you have installed the software, a message will be displayed asking you to restart the PC. After restarting you can connect the printer to the PC.

Insert the CD-ROM in the drive to start installation. A command window appears. Follow the instructions displayed on the screen.

If the installation program does not start automatically, you can start it by double-clicking on the "setup.exe" file located in the CD-ROM root directory.

The CD-ROM contains an installation manual which includes detailed operating instructions for the printer driver. Refer to this manual for further information.

Remark:

The B/W print option is not available in Windows 98.

Connect your printer

Make sure that both the PC and the printer are switched on. Never apply force when plugging in connectors into the equipment as this could damage both the cable and the connector.

Connect the USB cable to a USB port on your PC.
Connect the other end of the USB cable on the SAGEM PHOTO EASY-155 printer to the USB port (B).
Recognition between the two devices is automatic.

B

6 REPLACEMENT OF CONSUMABLES

The consumable items used with the SAGEM PHOTO EASY 155 printer (film cartridge, paper) are SAGEM (PLC) brand products. Consumables may be purchased in all big stores in the photography or printer sections but also on out internet site www.sagem.com or by using the consumables order form supplied with your printer.
Use of any consumable items other than SAGEM (PLC) brand products may result in the loss of the printer's guarantee.
SAGEM consumable item kit references:

- Film cartridge (ribbon + paper for 40 photos): ref. 251 559 421

SAGEM SAGEM SAGEM

- Film cartridges (3 ribbons + paper for 120 photos): ref. 251 559 434

SAGEM 3x40 SAGEM SAGEM 162MHz 950V SAGEM SAGEM 162MHz 950V SAGEM 162MHz 950V

CLEANING THE PRINT HEAD

Continuous lines across the length of your photographs may be caused by dirt particles stuck to the printhead.

You will need a methylated alcohol ^1 based cleaning product and some off-the-shelf cotton tips ("Q-tips").
Switch off your printer, disconnect the main cables and wait for five minutes; since the print head operates at a high temperature, there is a risk of burning if you touch it.

1 - Open the cartridge flap. Press on the locking lever and pull out the film cartridge.
2 - Pull out the paper tray.
3 - Turn the printer upside down to remove the lower hatch.
4 - Clean the heating line of the print head carefully using a cotton bud.
5 - Replace the lower hatch, turn the printer right side up, connect the mains cable and switch on the printer.

Warning - Never touch the print head with your fingers or any object that might scratch it.

1

Diagram of a device with labeled parts and directional arrows indicating movement or force

2

Illustration of a hand inserting a card into a folder with a circular icon on the cover (no text or symbols)

3

Line drawing of a hand inserting a small object into a device (no text or symbols)

4

Illustration of a hand pressing down on a device with arrows indicating motion (no text or symbols)

Line drawing of a hand using a tool to press down an electronic device (no text or symbols present)

Replace the film cartridge. Take care that the film is taut before inserting the cartridge into its compartment. Check that the locking lever is pushed down correctly and close the flap.

Push the paper tray back into place until the locking system clicks.

PAPER JAM

Follow this procedure if a sheet becomes stuck in the printer and cannot simply be pulled out:

Switch off your printer by pressing "O" on the switch behind the printer and disconnect the mains cable.
Turn the printer upside down.
Remove the lower cover.
Gently and carefully remove the sheet causing the jam. Under no circumstances touch the printhead.
Replace the lower cover and turn the printer right side up.
Switch on the printer and reconnect the mains cable.

Warning - Never use objects that could damage the printer (scissors, screwdriver, paper cutter, etc.)

PROBLEMS

Remark:

The printer is fitted with an automatic time-out to prevent overheating, this can be tripped when performing large print jobs. The printer automatically restarts the current print job as soon as the temperature drops back to normal.

PROBLEMS	SOLUTIONS
No mains supply (indicator lamp off)	Check that the power supply block is correctly plugged into the mains.Check that the power supply connector is correctly plugged into the printer.Check that the mains socket is live (check fuses and/or circuit breakers of your installation as necessary).
The light (indicator lamp red)	Refer to the error table below (Refer to paragraph Error messages, page -27).
The printer was unplugged during a print job	Set the printer on/off switch to "o" and then reconnect the mains lead.Switch on the printer and wait for the initialisation phase to be completed.If a sheet of paper is jammed, carry out the procedure (Refer to paragraph Paper jam, page -25).Restart printing.
No photograph is printed on a sheet	Are you using sheets that meet the technical specifications (Refer to paragraph Technical data, page -29)Have the sheets been inserted shiny face up?
The photograph is marked with a continuous line or a lot of spots	Clean the printhead (Refer to paragraph Cleaning the print head, page -24).
No PC printing	Check that the USB cable is correctly connected.Is the printer driver installed?
Photo chronology not observed (the printed photo is not the one expected)	You must set the date and time on your camera beforehand, and activate them before photographing.

ERROR MESSAGES

After any intervention on your printer, do not forget to press the

key to restart the current print job.

Error displayed	Icon displayed	Error Type	Description	Action
Err 01		Paper	No paper	Check that the paper has been correctly inserted in the loading tray.
Err 02		Paper	Paper jam	Remove any paper jammed in printer (do not reuse this sheet of paper)
Err 11		Film cartridge	No film cartridge	Insert a new film cartridge or replace the current one.
Err 12		Film cartridge	End of film cartridge	Replace the film cartridge with a new one.
Err 13		Film cartridge	Film cartridge error	Check that the film cartridge is correctly inserted. If error persists: replace the cartridge.
Err 14		Film cartridge	Film cartridge missing or incorrectly inserted	Check that the cartridge is correctly inserted and that the locking lever is locked.
Err 21	None	Memory card	File damaged or incorrect	File illegible. Try to print others. If error persists: check the file source, or try with a different source.
Err 22	None	Memory card	JPEG decompression error	The file cannot be read. Try printing the others. If the error persists, check the source of the file or try with another source.
Err 23	None	Memory card	Unsupported JPEG feature	The JPEG file contains an unsupported feature.
Err 27	None	Memory card	Read error	The card or file are illegible. Check the card source or try with another source
Err 72	None	IR link	Transfer error	Error during transfer of photographs from GSM mobile phone camera. Restart transfer from the GSM phone. Check that both devices are facing each other.
Err 75	None	IR link	Not enough space to store photograph	Photograph to be transferred too big or insufficient space to store photograph in printer.
Err 76	None	IR link	File format not supported	Photograph to be transferred is not in JPEG format.
Err 80		SIM card	SIM card no longer valid	The SIM card has already been used. Remove the inserted card and insert a valid SIM card.
Err 81		SIM card	Authorized print quantity reached	The authorized print quantity has been reached. Replace the consumable.
Err 82 to Err 88		SIM card	Card illegible or incompatible	Err 82: Card illegibleErr 83: Card unknownErr 84: Mechanical problemErr 85: Ribbon problemErr 86: Brand name not identifiedErr 87: Colorimetry errorErr 88: Type (master/pack) unknown
Err 89		SIM card	Incorrect data transfer	Data transfer error. Remove the inserted card and insert a valid SIM card.
Err 90		SIM card and ribban	Authorized print quantity reached	The selected number of photos is greater than the remaining ribbon capacity to print all photos.
Other error number	None	Other	System error	Switch off printer, wait 30 seconds and restart. If error persists, contact your retailer.

TECHNICAL DATA

PC configuration required:

Pentium or equivalent,

OS : Windows 98 SE / 2000 / Me / XP,

128 MB DRAM or more,

150 MB available on hard disk

USB port available.

Device name	:	SAGEM PHOTO EASY 155
Print method	:	Dye-diffusion thermal transfer
Resolution	:	300 x 300 dpi
Colours	:	16.7 million continuous
Print speed	:	Less than 120 seconds per photo (not including data transfer)
Interface	:	Memory cards, type Compact Flash (support type I & II), SM / MS / MMC / SD / xD (with adapter), USB port version 1.1.

Storage of photographs transferred from a GSM

phone camera : Up to 500 kilobytes

Image resolution supported : Up to 12 million pixels

Consumable items : Photo-quality paper. Film cartridge with three colours (yellow, magenta, cyan) and protective coating, 40 print operations per cartridge.

Paper size: 101 x 152.4 mm, available in packets of 20 sheets

Paper tray : By automatic loader, capacity 20 sheets

Mains supply : 230 V AC 50/60 Hz

Approval : EC

Operating conditions : 10 °C to 35 °C, 30 % to 85 % humidity

Size : 201 x 174 x 94 mm excluding paper tray

Weight : 1.5 kg (except power supply unit)

Power consumption : in standby: 7,6 W

in print mode: 70 W

All data are provided for reference purposes only. SAGEM (PLC) reserves the right to make any changes without prior notice.

GUARANTEE (UK Terms and Conditions)

In order to apply the guarantee, you should contact your dealer. Proof of purchase will be required. Should malfunctioning arise, the dealer will advise you what to do.

If you bought your equipment from SAGEM directly, the following shall apply :

A SAGEM undertakes to remedy by repair, free of charge for labour and replacement parts, any defects in the equipment during a period of twelve (12) months from the date of original delivery of the Equipment, where those defects are a result of faulty workmanship.

During this twelve month guarantee period, the defective equipment will be repaired free of charge; the customer must however return the defective equipment at his/her own expense, to the address given by SAGEM After Sales Department, the phone number of which can be found on the delivery slip. Unless the customer has concluded with SAGEM a maintenance contract in respect of the equipment which specifically provides for repairs to be carried out at the customer's premises, the repairs will not be carried out on the equipment at the customer's premises.

The following sentence applies to purchases of equipment for the customer's trade, business or profession. Except as otherwise expressly provided in this Document and to the extent permitted by law, SAGEM makes no representations or warranties, express or implied, statutory or otherwise, and to such extent, all terms and conditions implied by law are hereby excluded.

This guarantee does not affect the Customer's statutory rights.

B Exclusions From Guarantee

SAGEM shall have no liability under the guarantee in respect of :

• damage, defects breakdown or malfunction due to :
- failure to properly follow the installation process and instructions for use; or - an external cause to the equipment (including but not limited to, lightening, fire, shock or water damage of any nature); or
- modifications made without the written approval of SAGEM SA; or
- a failure or neglect to maintain the equipment or inappropriate maintenance; or
- unsuitable operating conditions, particularly of temperature and humidity; or
repair or maintenance of the equipment by persons not authorised by SAGEM; or

• wear and tear from normal daily use of the equipment and its accessories

• damage due to insufficient or bad packaging of equipment when returned to SAGEM

• supply of new versions of software

• work on any equipment or software modified or added without the prior written consent of SAGEM

- malfunctions not resulting from the Equipment or from software installed in user workstations for the purpose of use of the equipment

• communication problems related to an unsuitable environment, including :

- problems related to access and/or connection to the Internet such as interruptions by access networks or malfunction of the line used by the subscriber or his correspondent

- transmission faults (for example poor geographical coverage by radio transmitters, interference or poor line quality)

- the local network fault (wiring, servers, workstations) or the failure of the transmission network

- the normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning due to servicing not being carried out, servicing costs are in any event always borne by the customer.

C In the cases set forth in § B) as well as after expiry of the twelve month guarantee period, the customer must ask SAGEM for an estimate, and he/she must accept the estimate and agree to pay the charges mentioned in it before returning the equipment to SAGEM. The repair and delivery costs will be invoiced to the customer.

The foregoing shall apply unless otherwise agreed in writing with the customer and only for the UK. If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an obligatory rule applicable to consumers pursuant to their national legislation, such invalidity or illegality shall not impair or affect the remaining provisions or parts of this guarantee.

1 BIENVENUE 1
2 DÉCOUVREZ VOTRE IMPRIMANTE PHOTO EASY 155 2
3 PRÉPAREZ VOTRE IMPRIMANTE PHOTO EASY 155 3

SAGEM SA - Customer relations department

Line drawing of a rectangular electronic device with a square button and circular top (no text or symbols)

Simple line drawing of a rectangular object with a label '7' at the bottom left (no text or symbols on the object itself)

Illustration of a rolled-up document or scroll with a numbered marker (4) and an asterisk symbol, no readable text or symbols present.

Isometric view of a rectangular object with a gray background and a numbered circle containing the number 5* (no text or symbols on the object itself)

Diagram showing cable installation and connection to a device labeled A and B, with a plug inserted into the cable.

Illustration showing six steps of a device being adjusted, with numbered instructions and directional arrows.

888×88 888 DPOF A F B C D E H G I SAGEM 888×88 888 DPOF Photo Easy 150 - Personal Photo Printer ① ② ③ ④ ⑤ ⑥ ⑦

IMPRIMEZ EN MODE DPOF

Line drawing of a mobile phone connected to a CD or DVD device with signal waves (no text or symbols)

REEMPLACEMENT DES CONSOMMABLES

SAGEM SAGEM

Diagram of a device with labeled parts and directional arrows indicating movement or force

2

Illustration of a hand inserting a card into a folder, with no text or symbols present.

Line drawing of a hand inserting a card into a device (no text or symbols)

4

Illustration of a hand pressing down on a device with arrows indicating motion (no text or symbols)

Line drawing of a hand using a tool to press down an electronic device (no text or symbols present)

SAGEM SA - Customer relations department

Diagram showing ten labeled items of a device with numbered labels and a starting packet icon, likely illustrating a product or packaging design.

Diagram showing cable installation and connection to a device with labeled parts A and B

Line drawing of a hand holding a device with a curved arrow pointing to the handle (no text or symbols)

2

Diagram of a device with arrows indicating movement or force, no text or symbols present

3

Diagram showing a hand holding a device with an arrow indicating direction, labeled with point A.

4

Line drawing of a mechanical device with a circular top and rectangular base (no text or symbols)

5

CLIC!

6

Line drawing of a hand holding a CD or DVD device with a stylus, no text or symbols present

Line drawing of a hand inserting a card into a device (no text or symbols)

2

Diagram illustrating a folding or folding process with labeled components and directional arrows indicating movement.

3

Illustration showing a hand opening a document with arrows indicating flow or transformation, containing a signature or certificate.

Schutzfolie

CLIC

888×88 DPOF 888 A F B C E D H G I SAGEM 888×88 888 DPOF Photo Easy 150 - Personal Photo Printer ① ② ③ ④ ⑤ ⑥ ⑦

IHRE FOTOS AUSDRUCKEN

Line drawing of a mobile phone connected to a CD or DVD device with signal waves (no text or symbols)

SAGEM SAGEM SAGEM

Diagram of a device with labeled parts and directional arrows indicating movement or force

2

Illustration of a hand inserting a card into a folder, with no text or symbols present.

3

Illustration of a hand using a device to press or adjust a component (no text or symbols visible)

4

Illustration of a hand using a handheld device to press or write on a device (no text or symbols visible)

Illustration of a hand using a tool to press or adjust a device (no text or symbols visible)

SAGEM SA - Customer relations department

Diagram showing cable installation and connection to a device with labeled parts A and B

Illustration showing six steps of a device being adjusted, with numbered instructions and labeled components.

Illustration of a device with a label pointing to it, no text or symbols present

② 闭

Diagram showing a hand holding a device with an arrow indicating direction, labeled with point A.

Line drawing of a hand holding a small object with a bookmark (no text or symbols)

5 1 2

Line drawing of a compact electronic device with a circular top and rectangular base (no text or symbols)

7 CLIC!

Line drawing of a hand holding a device with an arrow indicating motion (no text or symbols)

Illustration of two hands holding a small geometric object with a diagonal line crossing through them (no text or symbols)

888×88 DPOF 888 A F B C D E H G I SAGEM 888×88 DPOF Photo Easy 150 - Personal Photo Printer ① ② ③ ④ ⑤ ⑥ ⑦

IMPRIMA SUS FOTOS

Line drawing of a mobile phone connected to a flip-flop device with signal waves (no text or symbols)

SAGEM SAGEM

Referencia kit consumibles (3 cintas + papel 120 fotografías): 251 559 434

SAGEM 3x40 LED SAGEM SAGEM

Diagram of a device with labeled parts and directional arrows indicating movement or force

2

Illustration of a hand inserting a card into a folder, with no text or symbols present.

3

Line drawing of a hand inserting a card into a device (no text or symbols)

4

Illustration of a hand pressing down on a device with arrows indicating motion (no text or symbols)

Hand holding a mechanical component with a downward arrow, no text or symbols visible

SAGEM SA - Customer relations department

Line drawing of a compact electronic device with a square button and circular top (no text or symbols)

Simple line drawing of a rectangular object with a circular label containing the number 7 (no text or symbols on the object itself)

Illustration of a mechanical component with internal channels and a numbered label (4) on the right side.

Illustration of a rectangular object with a folded paper sheet underneath, no text or symbols present.

Diagram showing cable installation and connection to a device with labeled parts A and B

Illustration showing six steps of a device being opened, with numbered instructions and directional arrows indicating movement.

Line drawing of a hand holding a device with a cable, no text or symbols present

⑤ 1 2

Line drawing of a mechanical device with a circular top and rectangular base (no text or symbols)

7 CLIC!

Line drawing of a hand holding a device with an arrow indicating motion (no text or symbols)

888×88 888 DPOF A F B C E D H G I SAGEM 888×88 888 DPOF Photo Easy 150 - Personal Photo Printer ① ② ③ ④ ⑤ ⑥ ⑦

STAMPA DELLE FOTOGRAFIE

STAMPA IN MODALITÀ DPOF

Line drawing of a mobile phone connected to a flip-flop device with signal waves (no text or symbols)

SAGEM SAGEM

Riferimento kit consumabili (3 nastri + carta 120 foto): 251 559 434

SAGEM 3x40 SAGEM SAGEM 100MHz SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGEM SAGAM

PULIZIA DELLA TESTINA DI STAMPA

Illustration showing five-step steps of a device being inserted into a device, labeled 1 to 5.

SAGEM SA - Customer relations department

Line drawing of a compact electronic device with a square button and circular top (no text or symbols)

Simple line drawing of a rectangular object with a side panel, labeled with number 7 (no text or symbols on the object itself)

Illustration of a rolled-up document or scroll with a numbered label (4) and an asterisk, no readable text or symbols present.

Isometric view of a rectangular object with internal lines, no text or symbols present

5*

3 DE PHOTO EASY 155 PRINTER VOORBEREIDEN

NETVOEDING

Opmerking:

Diagram showing cable installation and connection to a device with labeled components A and B

Illustration showing six steps of a device being opened, with numbered instructions and labeled components.

Line drawing of a device with a pointing arrow and label '民' (migrant) at the bottom left (no other text or symbols)

2

2 #3

3

Diagram showing a hand holding a device with an arrow indicating direction, labeled with point A.

4

Line drawing of a hand holding a device with a curved arrow indicating motion (no text or symbols)

5

Diagram of a mechanical component with numbered parts and directional arrows indicating motion or force

6

Line drawing of a mechanical device with a circular top and rectangular base (no text or symbols)

7

CLIC!

8

Line drawing of a hand holding a device with an arrow indicating motion (no text or symbols)

A F B 888×88 C 888 DPOF D E H G I SAGEM Photo Easy 150 - Personal Photo Printer

UW FOTO'S AFDRUKKEN

Line drawing of a mobile phone connected to a device with signal waves (no text or symbols)

Pentium of equivalent;

Besturingssysteem: Windows 98 SE / 2000 / Me / XP;

SAGEM SAGEM

Referentie toebehorenpakket (lint + 1200 vellen fotopapier: 251 559 434

SAGEM 3.40 SAGEM SAGEM SAGEM

Diagram of a device with labeled parts and directional arrows indicating movement or force

2

Illustration of a hand inserting a card into a folder with an arrow indicating direction (no text or symbols)

3

Line drawing of a hand inserting a card into a device (no text or symbols)

4

Line drawing of a hand pressing down on a device with arrows indicating motion (no text or symbols)

Illustration of a hand using a switch to press down an electronic device (no text or symbols visible)

Pentium of equivalent;

Besturingssysteem: Windows 98 SE / 2000 / Me / XP;

128 MB DRAM of meer;

User Guide - Data subject to change without notice