HBM-230 - Wireless Headphones LG - Free user manual and instructions

Product Type	Bluetooth Wireless Headset
Brand	LG
Model	HBM-230
Weight	Approx. 20 g
Dimensions (approx.)	50 x 20 x 10 mm
Power	Built-in rechargeable battery, charges via DC jack
Talk time	Up to 8 hours (estimated)
Charging time	Approx. 2 hours
Bluetooth version	Bluetooth 2.0+EDR (estimated)
Supported profiles	Hands-Free Profile (HFP), Headset Profile (HSP)
Bluetooth range	Up to 10 meters
Display	LCD screen with status, call, volume, battery indicators
Controls	Power/Call button, Volume +/-, Function button
Main functions	Answer/end call, call reject, audio transfer, voice dialing, last number redial, microphone mute
LED indicators	Power on/off, pairing mode, low battery, charging
Care and cleaning	Clean with a soft, dry cloth. Do not use abrasive products.
Safety	Use at moderate volume to avoid hearing damage. Do not expose to moisture.
General information	LG HBM-230 wireless headset, compatible with most Bluetooth phones.

Frequently Asked Questions - HBM-230 LG

How to turn the HBM-230 headset on and off?

To turn on, press and hold the Power/Call button for more than 3 seconds until the screen displays 'LG Electronics'. To turn off, press and hold the same button for more than 5 seconds until 'POWER OFF' appears.

How to charge the headset?

Plug the included charger into the DC jack on the headset. When the battery is fully charged, the LED indicators turn off. Charging time is approximately 2 hours.

How to pair the headset with my phone?

Make sure the headset is off. Then, press and hold the Power/Call button and the Volume - button simultaneously for at least 3 seconds. A beep indicates the headset is in pairing mode. On your phone, search for Bluetooth devices and select 'HBM-230'. A melody confirms successful pairing.

How to answer an incoming call?

When you receive a call, briefly press the Power/Call button to answer. If your phone supports automatic answer, it can be enabled in the phone settings.

How to adjust the volume?

Use the Volume + and Volume - buttons to increase or decrease the volume. The volume level ranges from 1 to 5 and is displayed on the LCD screen.

How to use voice dialing?

To activate voice dialing, press and hold the Power/Call button until you hear two beeps. The screen displays 'Voice Command'. Say the name of the contact saved in your phone.

How to reject an incoming call?

Press and hold the Volume - button while the headset is ringing to reject the call.

How to mute the microphone?

During a call, press and hold the Volume - button for 2 seconds. The screen displays 'Mic. Muted' and the microphone icon disappears. The other party can no longer hear you.

How to transfer a call from the headset to the phone?

During a call, press and hold the Power/Call button for at least 2 seconds to transfer audio to the phone. To return to the headset, press the same button again.

What to do if the headset does not connect automatically?

Check that the headset is on and near the phone. If the connection does not establish, put the headset in pairing mode (see manual) and reconnect it from your phone's Bluetooth menu.

USER MANUAL HBM-230 LG

IX. Handsfree Profile Related Functions 6

1. Incoming Call 6
2. Picking up a Call 6
3. Making a Call 6
4. Terminating a Call 6
5. Audio Transfer 6
   6.Call Reject 6
6. Microphone Mute 6

X. LCD ON / OFF 7
XI. LED ON / OFF 7

[ LCD Display ]

ICON	Disruption
	Indicates Bluetooth connection status
	Microphone activity(Mute/UnMute)
	Call status
VOL-	Volume level
	Battery remain
1234567890	Displays caller id, Bluetooth status.

[ KEY Display ]

I. Booting

• Press and the Hold Power/call key for more than 3 seconds.
• LED indicates the "LG Electronics", and then "HBM-510".
  LCD will be Off and enter the Power saving Mode after 20 seconds without pressing any key.

II. Shut down

• Press and the Hold Power /call key for more than 5 seconds.
• LED indicates the "POWER OFF".

III. Charging

Before using your HBM-510, you need to charge it fully by plugging the charger into the DC jack outlet. When fully charged, LED lights will be turned off.

IV. Pairing

• Press the power/call button and Volume down button at the same time for at least 3 seconds.
• The headset will notify you it is in pairable mode with a melody.
• Flickering LED periodically for one or two second means that the headset is waiting for pairing with other Bluetooth enabled devices.
• Pair the headset to the Bluetooth enabled phone while the headset is in pairable mode.
• When pairing has been completed, a melody will be played. If pairing is successful, LCD is displayed "connected", and then "HBM- 510".

V. Waiting

• The connecting mode from the registered Phone to the Bluetooth Headset.
• Press the Headset button to connect to the registered device

VI. Connect

• Even if the headset is not connected to any Bluetooth device, pressing the power/call button will automatically connect it to the last device connected. The connection supports both the handsfree profile and headset profile.

If the sign 'Connected' does not appear, try connecting again after switching the headset to Pairing Mode.

(In case of pairing of bluetooth with headset)

For last number redial, press the Power/call Button once until a short beep is heard. LED indicates the "Voice Command"

With certain types of Bluetooth handsets, the user may need to press the Power/call Button twice.

To activate Voice dialing, press the talk Button until it beeps twice. LED indicates the "Last Number Dial".

When the "call ended" is displayed in the LED, the call will be terminated.

VII. Disconnect

Cancel the connection operating the phone menu to disconnect the Bluetooth.

VIII. Volume Up and Down

Press the Volume (+) Button to increase the speaker sound, and the Volume (-) Button to lower the sound.

The volume level can be adjusted from 1 to 5.

VOL4.11

• The volume is made up to correspond with the volume level of the connected phone.

IX. Handsfree Profile Related Functions

All functions in this section should premise that the Handsfree profile of the Headset connect to the phone.

1. Incoming Call

• On a phone, which supports the handsfree profile: Press the power/call key if you want to answer the call.
• Some phones support automatic answering. Please refer to your Handset Guide for information on this feature.

2. Picking up a Call

• Press the Power/call button in the front of the Headset in the state of Ring Alerting to pick up a call.
• The phone Icon in the top of the LCD is indicated when start talking.

3. Making a Call

• If you make a call from the Headset, the call will (subject to phone settings) be automatically transferred to the Headset, If not automatically transfer the call manually by pressing the Power/call button.

4. Terminating a Call

Press the Power/call button when ringing with headset.

5. Audio Transfer

• To transfer a call from the Headset to the HBM-500, press the Power/call button at least 2seconds while answering.
• To transfer a call back to the Headset, Just press the Power/call button again.

6. Call Reject

• Press and hold the "Volume down" button when ringing.

7. Microphone Mute

• Press the Volume Down button 2 seconds during the talking using the Headset.

• "Mic. Muted" will be displayed and the Mic. Icon will be disappeared after the Beep sound.

• Using this function, the other party can not hear my voice.

X. LCD ON / OFF

In order to save power, the LCD automatically switches off if the headset does not receive any input or event (e.g. pairing request, incoming call, etc.) for 20 seconds.

• Note that when the LCD is turned off, it does not necessarily mean that the headset is turned off.
• When the user presses on any key, the LCD lits up. Note however that during battery charging the headset power is off and only the LED is on.

XI. LED ON / OFF

Headset status	LED indication
Power on, Power off	LED light flashes on five times quickly
Pairing mode	LED light remains on until paired successful. ( In the case of pass the 60 seconds-> off )
Low battery	LED light flashes on three times per 10 seconds
Charging	Until finish the charging
Press the any button	LED light remains on 1 second

CE0197 FCC Bluetooth®

>

* Section 15.19 Labelling requirements

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation.

* Section 15.21 Information to user

The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

• IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device.