LM9051B1 SOUP&CO - Blender/Soupeur MOULINEX - Free user manual and instructions
Find the device manual for free LM9051B1 SOUP&CO MOULINEX in PDF.
Download the instructions for your Blender/Soupeur in PDF format for free! Find your manual LM9051B1 SOUP&CO - MOULINEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LM9051B1 SOUP&CO by MOULINEX.
USER MANUAL LM9051B1 SOUP&CO MOULINEX
By reading this guide, you will find some user instructions that will help you discover the full potential of your appliance: make creamy or thick soups, chunky soups, sauces and fruit purées, smoothies, cocktails and steam based recipes and much more.
APPLIANCE DESCRIPTION c3 Programme display (P1, P2, P3 and P4 depending on model*) c4 Safety indicator display
D Blender jug unit d1 Stainless steel jug (Max limit = 1.8 litre) d2 Handle with trigger d3 Stainless steel blades E Lid unit e1 Measuring cap e2 Lid e3 Carrier seal e4 Waterproof seal F Cooking basket (depending on model*) f1 handle f2 basket
B Control panel b1 Selection buttons – P - Automatic programs P1 : Creamy soup/P2: Thick soup/ Steam cooking: P3 (depending on model*) Autoclean: P3 or P4 (depending on model*) – -/+ – Decrease/Increase cooking time or temperature – OK/OFF – Validation of program choice, cooking time or temperature/Stop appliance b2 Heat indicator light (if >50°C inside the jug) b3 Speed selector button b4 Ice crush button (for crushing ice-cubes) C Display screen c1 Temperature adjustment display from 60 to 100°C c2 Timer display (time adjustable from 0 to 59 mins)
Technical data on appliance:
Maximum temperature: 100°C Power: 1100W Maximum programming time: 59 minutes.
• This appliance is not intended to
◗ On personal safety be used by persons (including • Read the instructions carefully children) with reduced physical, before using your appliance for sensory or mental capacities or the first time and retain them for lack of experience and future use: the manufacturer knowledge, unless they are cannot accept any liability for supervised or have been given non compliant appliance use. instructions beforehand concer• Do not allow children to use the ning use of the appliance by a appliance without supervision. person responsible for their • This appliance shall not be used safety. by children. • Children should be supervised to Keep the appliance and its cord ensure they do not play with the out of the reach of children. appliance. 9
- by clients in hotels, motels and other residential type environments; - bed and breakfast type environments.
• Keep the appliance out of the reach of children.
• When using the appliance, some parts reach high temperatures (stainless steel side of jug, transparent parts of the lid and cap, metallic sections under the jug, basket). They can cause burns. Handle the appliance by the cold plastic parts (handles, motor unit). The red heat indicator light comes on if there is a risk of burning. • Do not use your appliance if it is not working correctly, if it has been damaged or if the power cord or plug have been damaged. To avoid any danger have the cord replaced by an approved service centre (see list in the service booklet). • The appliance is designed for domestic use only. The manufacturer shall not accept any liability and reserves the right to cancel the warranty in the event of commercial or inappropriate use or failure to follow the instructions. • This appliance is not intended to be used in the following applications, and the guarantee will not apply for: - staff kitchen areas in shops, offices and other working environments;
◗ European markets only:
• Keep the appliance and its cord out of reach of children under 8 years of age. • Children shall not play with the appliance. • This appliance may be used by persons with reduced physical, sensory or mental capacities, or by persons with little or no knowledge of the appliance, as long as they are under proper supervision and have received instructions as to the safe use of the appliance, and as long as they understand the implicit risks. • This appliance may be used by children as long as they are at least 8 years old, they are properly supervised and have received instructions as to the safe use of the appliance, and as long as they understand the implicit risks. Cleaning and maintenance of the appliance should not be carried out by children without supervision, 10
unless they are over 8 years of age and are being supervised by an adult.
• Your appliance releases steam which can cause burns. Handle the lid and measuring cap with care (use an oven glove or pot holder if necessary). Hold the measuring cap by the central section. • Be careful if hot liquid is poured into the food processor or blender as it can be ejected out of the appliance due to a sudden steaming. • Do not start up the appliance if the measuring cap is not placed in the hole in the lid, if the seal is not positioned on the support seal or if the carrier seal is not fixed in the lid. • Be aware of the risk of injury in the event of incorrect use of the appliance. • The blades are very sharp: handle them with care so as not to injure yourself whilst emptying the jug or during cleaning.
• The appliance is designed to work with alternating current only. Check that the voltage on your appliance's data plate corresponds to your domestic power supply.
• Given the diverse standards in effect, if the appliance is used in a country other than that in which it is purchased, have it checked by an Approved Service Centre. • Always unplug the appliance from the power supply if you leave it unattended and before assembling, dismantling and cleaning it. • Any error in connection will invalidate the guarantee. • Never pull on the power cord when unplugging the appliance. • Do not immerse the appliance, cord or plug in liquid. • Do not immerse this appliance in water or any other liquid. • The power cord must be kept out of the reach of children and must not be placed near or come into contact with the hot parts of the appliance, sources of heat or sharp edges.
◗ On connection to power supply ◗ On incorrect use
• The appliance must be plugged • Never turn on the blender jug into a socket with an earth without ingredients or with dry connection. products only. 11
• Always add solid ingredients before pouring in any liquid ingredients, without exceeding the limit marker of 1.8 L MAX engraved inside the jug. (Cf. Fig.
8). If the blender is too full, boiling water may spurt out. Make sure there is enough liquid to cover the mini limit marker (Cf. Fig. 7). • Some recipes may cause sudden overflowing, due to the formation of bubbles, particularly when using frozen vegetables. In this case, it is up to you to reduce the quantities accordingly. • Do not place your fingers or any other object in the jug while the appliance is in operation. • Do not use the jug as a container for freezing or sterilisation purposes. • Place the appliance on a stable, heat-resistant, clean, and dry surface. • Do not place the appliance next to a wall or a cupboard: the steam may damage them. • Do not let your hair, a scarf or a tie amongst other things hang over the jug whilst the appliance is in operation.
• Do not put any of the accessories in the microwave.
• Do not use the appliance outdoors. • Never exceed the maximum quantity indicated in the instructions. • Put the appliance away once it has cooled down. ◗ AFTER-SALES SERVICE • For your safety, do not use accessories or spare parts other than those provided by the approved after-sales service centres. • Do not use your appliance if it does not operate correctly, if it has been damaged or if the power cord or plug is damaged. To maintain safety, these parts must be replaced by an Approved Service Centre. Contact the Customer Relations Helpline - see contact list • Any intervention other than normal cleaning and maintenance by the customer must be performed by an Approved Service Centre."
• To steam cook, put the basket with the sliced vegetables in position and fill up the jug with 0.5 litres of cold water without exceeding the bottom of the basket (cf. Fig. 10 and 11). • Position the lid (E) on the jug (D) lining up the two triangles (Cf. Fig. 2), lock the lid without pressing by turning it in the direction of the arrow (Cf. Fig. 3) Position the blender jug (D) on the motor unit (A) until you hear it click (Cf. Fig. 4)
Your appliance has 3 operating modes:
• Automatic program mode: temperature, cooking and mixing times are pre-programmed to make soups and to carry out automatic steam cooking. • Manual Mode: personalised adjustments in temperature and cooking time for one use can be made according to your preferences. • Blender Mode: select the motor speed without using the cooking function to make some tasty smoothies or cocktails.
• The appliance only starts up once the jug and lid are correctly in place and are locked onto the motor unit.
Positioning of the jug and the lid unit
• Before using for the first time, wash all the accessories (D, E and F) in hot soapy water except for the motor unit (A). • Make sure that all packaging is removed before operating the appliance. • Put the seal on the carrier seal (Cf. Fig. 1.a) and clip the unit onto the lid (Cf. Fig. 1.b).
In the event of incorrect positioning or locking of one or the other (Cf. Fig. 5 and 6), the lock sign starts to flash when you activate a function.
USING THE APPLIANCE PROGRAM MODE Once the water and the ingredients are placed into the jug or into the steam basket, lock the lid and position the jug onto the motor unit (see before first use).
Select one of the automatic programs suggested below (P button) and validate (OK button). Introducing the suggested automatic programs Temperature (Max)
• You then have to validate the temperature chosen by pressing the
• OK button. • The red indicator light lights up to inform you that the cooking has started. • At any point you can adjust the motor onto either: - slow speed (position 1) to mix liquid ingredients (e.g. to make sauces). - quick speed (position 2 onwards) to mix solid ingredients.
• Turn the speed selector to position 0 to stop the appliance.
• Press on the trigger (d2) then remove the blender jug (D). If you wish to program an operation time which stops automatically: • Adjust the operation time with the aid of the + (increase) and - (decrease) buttons. • Select a speed by turning the speed selector. The count time appears on the screen. • The motor stops automatically at the end of the count time. Ice crushing button: The "Ice" button sets off the ice crushing operation. You can stop the appliance as required by pressing the "OFF" button. You can crush a maximum of 6 to 8 ice cubes.
BLENDER MODE (without cooking)
P1 - Creamy soup (thin texture)
• Select a speed by turning the speed selector to the right. The mixing starts and the time appears on the screen.
In blender mode, you can select up to 5 speeds with different mixing types. The pulse speed can be found to the left of position 0. 0
100°C P3 - (only for model with cooking basket) – Steam cooking with cooking basket and 50 cl water
(depending on model*)
100°C P3 - (or P4 for model with cooking basket) - Autoclean: automatic cleaning programme
100°C When the program is finished, the appliance gives out 3 beeps.
Unlock the jug by pressing the trigger (d2) located on the inside of the handle (cf. Fig. 9) and serve immediately or leave the jug in place to keep warm (up to 40 minutes).
• If you open the lid, press the trigger or remove the jug, the warming process will automatically stop.
• When the program has started, you can stop the appliance at any time by pressing the P button. The program is then in pause mode and you can restart it by pressing the P button again or by pressing the OK button. • If you choose the wrong program by mistake and you wish to cancel it, press the OFF button for 2 seconds and that will allow you to restart the times and the temperatures.
• Make sure you have enough liquid to cover the Min limit marker (Cf. Fig. 7). and take care not to exceed the 1.8 L MAX limit marker engraved inside the jug (Cf. Fig. 8). • Some recipes may cause sudden overflowing, due to the formation of bubbles, particularly when using frozen vegetables. In this case, it is up to you to reduce the quantities accordingly. • Time and temperature information is flashing: you can modify this information. Adjust the time as required with the aid of the + (increase) and (decrease) buttons, depending on the ingredients used and the amount to be made (see table of the cooking times for soups in the recipe booklet). • With the cooking basket (depending on model*) you can steam cook (use P3 with 0.5 litres of water), or for chunky soup recipes and cooking whole ingredients such as meat, fish, vegetables at the same time as your soup (use P1 or P2). • At the end of the programs, the appliance automatically keeps the recipe warm for 40 minutes so it remains ready to be consumed. To stop warming, simply press the OFF button.
• Adjust the cooking time with the aid of the + (increase) and - (decrease) buttons, depending on the ingredients used and the amount to be made (see table of the cooking times for soups in the recipe booklet). • You have to then validate the time chosen by pressing the OK button. • The temperature information is flashing, you can change this information. Adjust the cooking temperature with the aid of the + (increase) and (decrease) buttons. 14
CLEANING THE APPLIANCE
• Do not immerse the appliance in water. Never put the motor unit (A) under hot running water. • Clean the jug immediately after use. • Fill up the jug with 1 litre of hot water along with 2 or 3 drops of washing up liquid Only use the recommended amount of water and washing up liquid. An excess of washing up liquid creates more foam and consequently can lead to overflowing. • Use the automatic Autoclean programme: P3 or P4 (depending on model*) to carry out a prewash of the bowl. • Once the program has stopped, unplug the appliance. • Press on the trigger (d2) then remove the blender jug (D). • Place the jug on a flat surface. • Unlock the lid by turning it a quarter turn clockwise. Remove the lid with care. • When the parts have cooled down, unclip the lid's carrier seal with the aid of the gripping system.
• Finish cleaning the jug with the aid of a sponge.
• Rinse the inside of the jug and the lid under running water. • In the event of the heated part of the jug getting extremely dirty, leave to soak for a few hours in a mix of water and washing up liquid to help get it clean. • Take care when cleaning the blades (d3) in the blender jug and when you empty the bowl as they are sharp. • Use a damp cloth to clean the motor unit (A). Dry it carefully. • The detachable parts (lid, carrier seal, seal, measuring cap, cooking basket) can be cleaned with a sponge and hot soapy water.
IT WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK CAUSES PROBLEMS The appliance does not work.
Excessive vibrations.
The jug and the lid are not in the correct place or are not locked correctly.
The appliance is not placed on a flat surface, the appliance is not stable
Place the appliance on a flat stable surface.
Volume of ingredients is too high.
Volume of ingredients is too high.
SOLUTIONS Plug your appliance into the mains power supply.
Check that the jug and the lid are correctly positioned and locked following the diagrams in the instructions
It is not plugged in.
Reduce the quantity of ingredients processed.
Reduce the quantity of ingredients processed.
The lid is not positioned or locked correctly
Lock the lid firmly onto the jug
The waterproof seal is not present
Position the waterproof seal on the carrier seal and clip the unit onto the lid
The waterproof seal has been cut through or damaged
Change the seal or contact an approved service centre
Reduce the size or quantity of the ingredients processed. Add some liquid
The blades do not rotate easily
Pieces of food too big or too hard
Motor overload caused by too large an Let the motor cool down and reduce amount of ingredients or pieces of the amount of ingredients in the jug. food that are too hard or too large
Displays "safety" + red indicator light is flashing
Displays "Err" + red indicator light is flashing Displays « ntc » + red indicator light is flashing
Empty jug, nearly empty or not enough liquid in recipe
The heating element does not work The temperature sensor is no longer working
Add liquid up to the jug's minimum level marker (Cf. Fig. 7)
Contact the Customer Relations Helpline - see contact list Contact the Customer Relations Helpline - see contact list
Your appliance still doesn't work?
Contact the Customer Relations Helpline - see contact list.
• Disposal of packaging materials and the appliance. The packaging is made of exclusively environmentally safe materials that can be disposed of according to current recycling regulations. To dispose of your appliance, consult the appropriate department of your local authority. • Expired electronic or electrical products:
Think of the environment!
Your appliance contains valuable materials which can be recovered or recycled. Please take it to a local waste collection point where it will be disposed 16
RISOLUZIONE DEI PROBLEMI PROBLEMI CAUSE UW APPARAAT WERKT NIET. WAT NU?
OORZAKEN PROBLEMEN WJOLß W°¸u® - P2
)tIOÆœ 1U¢ d¥cÄ rOEM¢(
ManualGo.com