WLI-UC-GNM - USB Network Adapter BUFFALO - Free user manual and instructions

USER MANUAL WLI-UC-GNM BUFFALO

Wireless N150 COMPACT USB 2.0 Adapter WLI-UC-GNM

Sommaire

Automatic Secure Setup (WPS PIN) 16

Windows 7 ou Vista (Client Manager V) 16
Windows XP (Client Manager 3) 20

Configuration manuelle (Client Manager) 22

Windows 7 ou Vista (Client Manager V) 22
Windows XP (Client Manager 3) 25
Windows Vista (WLAN AutoConfig) 27
Windows XP (Wireless Zero Configuration) 30

Profile Information (Basic) 52

Profile Information (Network) 54

Profile Information (Browser) 55

Profile Information (Printers) 56

Automatic Secure Setup (WPS PIN)

Windows XP propose a unique and efficient user interface for your users. This user interface is a combination of the Windows XP user interface and the Windows XP graphical user interface.

1 Cliquez-droit sur I'icone de connexion reseau située dans la zone de notification.
2 Cliquez sur [Afficher les reseaux sans fil disponibles].
Wireless Network Connection
Network Tasks Choose a wireless network Click an item in the list below to connect to a wireless network in range or to get more information. 001D738991D4 Security-enabled wireless network (WPA) To connect to this network, click Connect. You might need to enter additional information..
Related Tasks Learn about wireless networking Change the order of preferred networks
Change advanced settings AirStation Security-enabled wireless network
Connect
Wireless Network Connection Entrez deux fois la clé de cryptage (phrase de
The network '001D738991D4' requires a network key (also called a WEP key or WPA key). A network key helps prevent unknown intruders from connecting to this network. Type the key, and then click Connect. Network key: Confirm network key: Connect Cancel

Profile Information (Basic)

Profile Information (Network)

Profile Information (Printers)

Federal Communication Commission Interference Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Important Note - FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This device and its antenna(s) must not be collocated or operating in conjunction with any other antenna or transmitter.

SAR compliance has been established in typical laptop computers with USB slot, and product could be used in typical laptop computer with USB slot. Other applications like handheld PCs or similar devices have not been verified and may not comply with related RF exposure rule and such use shall be prohibited.

The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. This firmware setting is not accessible by the end user.

Industry Canada Statement:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Important Note - Radiation Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with Canada RF exposure compliance requirements, please follow operation instruction as documented in this manual.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CE Notification:

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Europe - EU Declaration of Conformity:

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC.

A copy of the Declaration of Conformity can be downloaded by selecting this product from the list at http://www.buffalo-technology.com/support/downloads/

EN60950-1:2006

Safety of Information Technology Equipment

EN 62311:2008

Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz).

EN 300 328 V1.7.1 (2006-10)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive.

• EN 301 489-1 V1.8.1: (2008-04)

Electromagnetic compatibility and Radio spectrum Matters (ERM) — ElectroMagnetic Compatibility (EMC) standard for radio equipment and services — Part 1: Common technical requirements.

• EN 301 489-17 V2.1.1 (2009-05)

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems

Intended use:

This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and office use in all EU and EFTA member states.

EU Countries intended for use

This device is intended for indoor home and office use in the following countries: Austria, Belgium, Germany, Denmark, Spain, Greece, France, Finland, Italy, Ireland, Luxembourg, The Netherlands, Portugal, Sweden, United Kingdom, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Poland, Slovak Republic and Slovenia. The device is also authorised for use in all EFTA member states Iceland, Liechtenstein, Norway and Switzerland.

EU countries not intended for use:

None

Potential restrictive use:

This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.

In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain an authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.

In Belgium there is a restriction in outdoor use. The frequency range in which outdoor operation in Belgium is permitted is 2460 - 2483.5 MHz.

This device may not be used for setting up outdoor radio links in France and in some areas the RF ourput power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.

Taiwan:

SAR compliance has been established in typical laptop computer(s) with CardBus slot, and product could be used in typical laptop computer with CardBus slot. Other application like handheld PC or similar device has not been verified, may not comply with related RF exposure rules, and such use shall be prohibited.

FCC ID:FDI-09102085-0

[Indonesia]

15640/POSTEL/2010

2347

[India]

681/2010/WRLO

[Australia]

N32

Z068

[ Canada ]

6102A-032

[Kuwait]

mc/m/5/3-11176

[Oman]

TRA/TA-R/1366-01/10

[Korea]

in##

BUF-WLIUCGNM01

[Philippines]

No.: ESD-1004378C

[ Singapore ]

Complies with

IDA Standards

DA103412

[ UAE]

TRA

REGISTERED No:

ER0043290/10

DEALER No:

BUFFALO INC.

C€ 0560

Cesky[Czech]

Hereby, Buffalo Technology Inc. declares that this AirStation WLI-UC-GNM is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Espanol[Spanish]

Lietuviu [Lithuanian]

Portugues[Portuguese]

Slovensko[Slovenian]

Buffalo Technology Inc. izjavlja, da je ta AirStation WLI-UC-GNM v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolocili directives 1999/5/ES.

Slovensky[Slovak]

@ 2003-2010 Buffalo Technology (Buffalo, Inc.)

Buffalo Technology (USA), Inc.

11100 Metric Blvd, Suite 750

Austin, TX 78758-4018

RENSEIGNEMENTS GÉNÉRAUX

Buffalo Technology UK LTD

176 Backingham Avenue,

Slough, Berkshire, SL1 4RD

Royaume-Uni

RENSEIGNEMENTS GÉNÉRAUX