PRO2000HD - Dive buoyancy vest SEAC - Free user manual and instructions

Product type	Diving stabilizer jacket
Brand	SEAC
Model	PRO2000HD
Certification	CE 0474 RINA - EN 250:2000 - EN 1809
Envelope type	Single envelope with independent harness
Envelope material	Exterior Cordura 1000 PU, interior Nylon 420 PU
Welding	High frequency
Inflator	Standard SCS inflator
Harness system	Independent harness with adjustable shoulder straps on the back
Dump valves	2 mechanical overpressure valves + 1 pull dump on the inflator
Pockets	2 expandable zippered pockets + 1 additional foldable pocket
Integrated weight system	Q&S (Quick and Safe), max capacity 4 kg depending on size
Rear weight pockets	2 pockets with adjustable buckle, max 2 kg per pocket
D-rings	5 stainless steel rings 38 mm + 2 stainless steel rings 25 mm
Backpack	Classic high-resistance nylon backpack shape
Cylinder capacity	Single diameter 140-229 mm; Twin diameter 170 mm, max volume 10+10 L
Available sizes	XS, S, M, L, XL, XXL
Jacket weight	XS/S: 3.8 kg; M: 3.9 kg; L: 4.0 kg; XL: 4.1 kg
Buoyancy (lift)	XS 8.2 kg; S 11.2 kg; M 18.4 kg; L 20.4 kg; XL 21.4 kg
Maintenance	Rinse with fresh water after each dive, dry in the shade, store dry
Safety	Check the inflator and valves before use, respect the maximum weight load
Spare parts and repairability	Repairs by a SEAC approved center, original parts available

Frequently Asked Questions - PRO2000HD SEAC

What is the buoyancy of the SEAC PRO2000HD jacket according to size?

The buoyancy varies according to size: from 8.2 kg (80 N) in XS to 21.4 kg (210 N) in XL. For size M, it is 18.4 kg (180 N). Consult the buoyancy table to choose the model suited to your equipment.

What sizes are available for the PRO2000HD?

The jacket is available in sizes XS, S, M, L, XL and XXL. The size chart provides indications of height, weight, chest, waist and pelvis for each size.

How should I maintain this stabilizer jacket?

After each dive, rinse the jacket with fresh water inside and out. Let it dry in the shade, without folding it, then store it in a dry place. Regularly check the valves and inflator to prevent any fouling.

Is this jacket certified for scuba diving?

Yes, the PRO2000HD is certified according to standards EN 250:2000 and EN 1809 by the notified body 0474 RINA. It thus complies with the safety requirements for autonomous diving equipment.

What type of cylinder can I use with this jacket?

The jacket accepts single cylinders with a diameter of 140 to 229 mm. For twin cylinders, the diameter must be 170 mm with a maximum volume of 10 + 10 litres.

How does the integrated Q&S weight system work?

The Quick and Safe system allows you to attach integrated weight pockets with a maximum capacity of 4 kg depending on the size. It ensures quick release in case of emergency and optimal weight distribution.

How many pockets does this jacket have?

This model is equipped with 2 expandable pockets with zipper and an additional foldable pocket. It also has 2 rear weight pockets (max 2 kg each).

Is this jacket suitable for cold water diving?

The jacket made of Cordura 1000 PU and Nylon 420 PU is durable and designed for use in various conditions. However, the buoyancy is high (up to 21.4 kg in XL), which can be suitable for thick wetsuits. It is recommended to check suitability with your equipment.

Does the jacket come with an inflation system?

Yes, the PRO2000HD is equipped with a standard SCS inflator that allows oral and cylinder inflation. It also has 2 overpressure valves and a pull dump system on the inflator.

How to choose the right jacket size?

Use the provided size chart based on your height, weight and chest. For example, a size M corresponds to a height of 175-179 cm, a weight of 65-75 kg and a chest circumference of 92-100 cm. Always try the jacket with your full equipment.

USER MANUAL PRO2000HD SEAC

- JACKET • STABILIZING JACKETS • GILETS STABILISATEURS • CHALECOS HIDROSTATICOS • TARIEJACKETS

PRO2000 HD

Italiano 1

English 2

Français 3

Español 4

Deutsch 5

JACKET

ATTENZIONE

This pamphlet is an integral part of the BC user's manual and should be stored with it.

CERTIFICATION EN 250: 2000

The PPE described in this instruction manual have been subjected to type approval testing and certified in accordance with: standards EN 250:2000 (D.e. 89/686/EEC category III, as harness for SCUBA) and EN 1809 (D.e. 89/686/EEC category II, as buoyancy compensator) by Registered Test Center #0474 RINA, Via Corsica 12, 16128 GENOA.

Model EN 250: 2000 EN 1809 Marking.

The number 0474 next to the CE mark refers to Registered Test Center #0474 RINA, Via Corsica 12, 16128 GENOA, authorized to run production checks according to art. 11.BD.e. 89/686/EEC only as regards products classified in category III (harness for SCUBA).

MARKINGS FOUND ON EVERY BC: CE0474

SIZES TABLE
SIZE	XS	S	M	L	XL	XXL
HEIGHT	167-171	171-175	175-179	179-184	184-188	188-192
WEIGHT	55-65	60-70	65-75	75-85	85-95	90-105
CHEST	84-92	88-96	92-100	96-104	100-108	104-112
WAIST	72-80	76-84	80-88	84-92	88-96	92-100
PELVIS	88-96	92-100	96-104	100-108	104-112	108-116

The instructions provided in this sizes table refer to standard values for the human body. The BC is designed to be more ample and roomy based on this table to allow for more agility and to make it more comfortable to use.

BUOYANCY LIFT
SIZE	XS	S	M	L	XL
KG	8.2	11.2	18.4	20.4	21.4
NEWTON	80	110	180	200	210
POUNDS	18.1	24.7	40.6	45.6	47.2

TECHNICAL INFORMATION

MODEL: PRO2000 HD
TYPE:	Single-bag with independent harness
CERTIFICATION:	CE 0474 RINA -EN 250:2000 -EN 1809
INFLATOR UNIT:	Inflator scs standard
BAG TYPE:	Three-dimensional aircell
BUOYANCY BAG MATERIAL:	External: Cordura 1000 PUInterior: Nylon 420 PU
SEALING:	High frequency
BACKPACK:	Classic Backpack in HR Nylon
HARNESS SYSTEM:	Independent harness with adjustable shoulder straps on the backpack.
DUMP VALVES:	2 over-expansion relief, mechanical1 traction in the inflator
POCKETS:	2 expandable pockets with zip closure1 backup roll-up pocket
INTEGRATED WEIGHT SYSTEM:	Q&S [quick and safe]Sizes: xs/s/m/l/xl: max 4 kg
D-RING:	5 stainless steel rings, 38-mm2 stainless steel rings, 25-mm
REAR WEIGHT POCKET:	2 pockets with adjustable buckleMax 2 kg per pocket
SIZE LIMITS ALLOWED FOR TANKS:	Single-tank: diam. min-max 140/229 mmDual-tank: diam. for tank 170 mm - vol. max 10 + 10 liters
WEIGHT (KG):	XS: 3.8 kgS: 3.8 kgM: 3.9 kgL: 4.0 kgXL: 4.1 kg

GILET STABILISATEUR

ATTENTION