YD-127-AI - Compressor Vevor - Free user manual and instructions
Find the device manual for free YD-127-AI Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Portable air compressor |
| Brand | Vevor |
| Model | YD-127-AI |
| Power supply | 230 V / 50 Hz |
| Motor power | 1.1 kW |
| Maximum working pressure | 8 bar |
| Actual air flow | 50 L/min |
| Tank capacity | 24 L |
| Dimensions (L x W x H) | 50 x 25 x 45 cm |
| Net weight | 15 kg |
| Noise level | 65 dB |
| Compressor type | Oil-free piston |
| Main functions | Tire inflation, powering pneumatic tools, painting, cleaning |
| Maintenance | Drain the tank after each use; replace the intake filter regularly |
| Cleaning | Use a damp cloth; do not immerse in water |
| Safety | Safety valve, motor thermal protection |
| Spare parts | Available from Vevor after-sales service |
| Repairability | Gasket and valve kit available separately |
| General information | Multilingual manual included; 2-year warranty |
Frequently Asked Questions - YD-127-AI Vevor
How do I use this compressor to inflate a tire?
Plug in the compressor, connect the hose to the tire valve, set the desired pressure on the gauge, then turn the unit on. Monitor the pressure and stop as soon as the threshold is reached.
Does this compressor require oil?
No, the YD-127-AI is an oil-free compressor. No lubrication is required, which reduces maintenance.
How do I maintain the tank to prevent rust?
After each use, open the drain screw located under the tank to remove condensation. Regularly check the inside and dry it if necessary.
Why won't the compressor start?
Check that the cord is plugged in, the switch is set to "On", the pressure in the tank is not already at maximum, and the thermal circuit breaker has not tripped. If the problem persists, contact customer service.
What is the maximum pressure for pneumatic tools?
The maximum pressure of the compressor is 8 bar. However, each tool has its own recommended working pressure (often between 2 and 6 bar). Adjust the regulator accordingly.
Is the compressor noisy?
The noise level is about 65 dB at 1 m, which is relatively moderate. Hearing protection is recommended for extended use.
How do I adjust the outlet pressure gauge?
Use the regulator knob to adjust the downstream pressure. Turn clockwise to increase, counterclockwise to decrease, while monitoring the gauge on the outlet side.
What safety precautions should I follow?
Before each use, check the condition of the hose and fittings. Never exceed the indicated maximum pressure. Never point the air stream at a person or animal. Unplug the unit before any maintenance.
Is this compressor suitable for painting?
Yes, with a suitable spray gun, the flow rate of 50 L/min is sufficient for small jobs. Make sure you have a good water/oil separator filter.
How do I drain the air from the tank?
Turn off the power, open the outlet valve to depressurize, then open the condensate drain screw at the bottom of the tank. Let the water drain, then close the screw.
User questions about YD-127-AI Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual YD-127-AI - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YD-127-AI by Vevor.
USER MANUAL YD-127-AI Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : YD-127-AI
Category : Compressor