WS225-KCL - Sander Vevor - Free user manual and instructions
Find the device manual for free WS225-KCL Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Belt and disc sander |
| Brand | Vevor |
| Model | WS225-KCL |
| Supply voltage | 230 V ~ 50 Hz |
| Power consumption | 550 W |
| No-load speed | 1,400 rpm |
| Sanding disc diameter | 225 mm |
| Abrasive belt dimensions | 50 x 1016 mm |
| Table tilt range | 0° to 45° |
| Dust extraction connection | Diameter 35 mm |
| Tool dimensions (L x D x H) | 45 x 30 x 35 cm |
| Gross weight | 12 kg |
| Noise level | 85 dB(A) |
| Switch type | Switch with thermal protection |
| Maintenance and cleaning | Regular cleaning with a soft brush and dust extraction |
| Safety | Safety switch, protective cover, emergency stop |
| Spare parts and repairability | Bearings, belts and carbon brushes accessible for replacement |
| Warranty | 2 years |
| Certification | CE |
Frequently Asked Questions - WS225-KCL Vevor
How to install the WS225-KCL sander for the first time?
Place the machine on a stable and flat surface. Check that the voltage matches the one indicated on the nameplate. Mount the abrasive disc and belt, then adjust the belt tension before plugging in the tool.
How to change the abrasive disc?
Unplug the machine. Remove the center screw of the disc, then peel off the old disc. Clean the surface, place the new disc aligning the holes (if any) and screw it back on firmly.
How to properly tension the abrasive belt?
Unplug the tool. Use the tension lever to unlock the belt. Place the belt on both rollers, then operate the lever to tension it. The belt should not slip or be too tight: a slight play is normal.
How to adjust the tilt of the sanding table?
Loosen the locking handle under the table. Tilt the table to the desired angle (0 to 45°) using the graduation as a guide. Tighten the handle firmly before starting work.
How to clean the sander after use?
Unplug the device. Vacuum the dust with a suitable vacuum cleaner, then wipe the surfaces with a slightly damp cloth. Regularly clean the suction openings and cooling slots.
What safety precautions should I follow?
Wear safety goggles and a dust mask. Do not use loose gloves or loose clothing. Keep your hands away from the sanding areas and use the protective cover.
How to connect a vacuum cleaner to the sander?
Locate the dust extraction connection at the back of the machine. Attach your vacuum cleaner's adapter (diameter 35 mm) by screwing or clipping it. An efficient dust extraction system reduces dust and extends the tool's lifespan.
What to do if the machine no longer starts?
First check the power supply and the cable. Make sure the thermal protection has not tripped (wait a few minutes). If the problem persists, check the motor carbon brushes and call a professional if necessary.
How to replace the motor carbon brushes?
Unplug the tool. Locate the carbon brush holders on the motor. Unscrew the caps, remove the worn brushes and insert the new ones respecting the direction. Screw the caps back on without forcing.
What sanding speed is recommended for wood?
The fixed speed of 1,400 rpm is suitable for most woods. For soft woods, apply light pressure to avoid burns. For hard woods, let the machine work without forcing.
User questions about WS225-KCL Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual WS225-KCL - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS225-KCL by Vevor.
USER MANUAL WS225-KCL Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : WS225-KCL
Category : Sander