L225-JCL - Sander Vevor - Free user manual and instructions
Find the device manual for free L225-JCL Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Orbital sander |
| Brand | Vevor |
| Model | L225-JCL |
| Power supply | Electric mains (230 V, 50 Hz) |
| Rated power | 220 W |
| No-load speed | 13,000 min⁻¹ |
| Eccentric stroke | 3.2 mm |
| Sanding pad diameter | 125 mm |
| Abrasive paper type | Velcro (hook-and-loop) |
| Dust extraction connection | 35 mm |
| Cable length | 2 m |
| Dimensions (L × W × H) | 26 × 12 × 15 cm |
| Weight | 1.6 kg |
| Sound pressure level | 82 dB(A) |
| Sound power level | 93 dB(A) |
| Protection class | IP20 |
| Safety class | 2 |
| Main functions | Finishing sanding, deburring, light polishing |
| Maintenance and cleaning | Clean the housing with a damp cloth and blow out the ventilation openings after use |
| Safety | Wear safety goggles and a dust mask; unplug before changing any accessory |
| Spare parts and repairability | Available: backing pads, switches, carbon brushes, sanding pads; repair by a professional is possible |
Frequently Asked Questions - L225-JCL Vevor
How do I change the sandpaper on the sander?
Unplug the device. For a Velcro pad, simply peel off the used abrasive and attach the new one, aligning the dust holes. For a clamp fastening, release the mechanism, replace the sheet and retighten firmly.
What speed should I use for each type of surface?
A low speed is recommended for wood and plastics, while a high speed is suitable for metals and finishes. Adjust with the dial if present. Always start by testing on a scrap piece.
How can I avoid excessive marks when sanding?
Keep the sander flat and move it gently without pressing too hard. Use a suitable abrasive and work in several passes, from coarse to fine grit.
Is the sander compatible with a vacuum extractor?
Yes, the sander has a 35 mm dust extraction connection. Connect a vacuum cleaner or dust bag to reduce dust and improve visibility.
Why does the sander overheat?
Abnormal heating can be caused by obstructed ventilation, prolonged use, or excessive pressure. Check that the ventilation slots are clean and let the tool cool down intermittently.
How do I maintain the motor carbon brushes?
The carbon brushes are wear parts. They should be replaced when they measure less than 5 mm. Unscrew the caps, remove the brushes and reinstall new ones with a soft cloth.
Can I use the sander on metal?
Yes, by choosing an abrasive suitable for metal and reducing the speed if possible. Wear eye protection and avoid any contact with flammable substances.
How can I reduce vibrations?
Use both hands, hold the handle firmly and let the machine work. Try a balanced pad and make sure the abrasive is properly centered.
Can the sander run on battery?
No, this model is mains-powered. It is not designed to be adapted to battery. Use it with a 230 V outlet and an extension cord in good condition.
Where can I find the serial number?
The serial number is engraved on the nameplate, usually under the housing or at the back of the sander. It is required for any after-sales service or spare part request.
User questions about L225-JCL Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual L225-JCL - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. L225-JCL by Vevor.
USER MANUAL L225-JCL Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : L225-JCL
Category : Sander