MM0101 - Glue gun Vevor - Free user manual and instructions
Find the device manual for free MM0101 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Hot melt glue gun |
| Brand | Vevor |
| Model | MM0101 |
| Power supply | Mains 220-240 V, 50 Hz |
| Rated power | 60 W |
| Heating time | 2 to 3 minutes |
| Maximum temperature | 200 °C |
| Glue stick diameter | 7 mm |
| Dimensions (L × W × H) | 20 × 16 × 8 cm |
| Net weight | 0.45 kg |
| Power cord length | 1.5 m |
| Main functions | Rapid heating, steady glue flow, precise manual use |
| Maintenance and cleaning | Unplug and let cool before cleaning with a dry cloth |
| Safety | Double insulation, thermal protection shut-off, insulated nozzle |
| Spare parts and repairability | Replacement nozzle, holding stand available |
| General information | Supplied with 10 glue sticks 7 × 200 mm |
Frequently Asked Questions - MM0101 Vevor
How do I load glue sticks into the Vevor MM0101 glue gun?
Insert the 7 mm diameter glue stick into the rear hole of the gun. Push gently until it is engaged, then press the trigger. Never pull the stick backwards.
What is the heating time of the MM0101 glue gun?
The gun reaches its operating temperature in 2 to 3 minutes. The glue starts melting at that point, so wait for a slight flow when pressing the trigger.
What maximum temperature can the device reach?
The maximum temperature is 200 °C. Never touch the hot nozzle and keep it away from flammable materials.
What type of glue sticks should I use?
Only use 7 mm hot melt glue sticks. Larger diameter sticks will not fit, and smaller ones will cause insufficient flow.
How do I clean the gun after use?
Unplug the device and let it cool completely. Wipe the outside with a dry cloth. If glue flows onto the nozzle, you can remove it once cooled. Do not immerse in water.
The gun is no longer heating up, what should I do?
Check that the socket works and the cable is not damaged. Wait a few minutes after powering on. If the problem persists, the thermal safety system may have been triggered: unplug and plug back in after 15 minutes.
Can I use colored or glitter glue sticks?
Yes, as long as the diameter is 7 mm and the glue is indeed hot melt. Special sticks for low-temperature glue guns are also suitable.
How do I replace the nozzle if it is clogged?
Unplug and let it cool. Unscrew the nozzle with a wrench if necessary, or use a needle to remove residue. The replacement nozzle is available as an accessory.
What safety precautions should be taken?
Never touch the hot nozzle, do not use near children, and place the gun on its holding stand during breaks. Always unplug after use.
Can the gun be left plugged in continuously?
It is best not to leave it plugged in unattended. Although it has overheating protection, turn it off and unplug it when you are no longer using it.
User questions about MM0101 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Glue gun in PDF format for free! Find your manual MM0101 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MM0101 by Vevor.
USER MANUAL MM0101 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : MM0101
Category : Glue gun