MM0201 - Glue gun Vevor - Free user manual and instructions
Find the device manual for free MM0201 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Hot melt glue gun |
| Brand | Vevor |
| Model | MM0201 |
| Power supply | 220-240 V~, 50 Hz |
| Power | 100 W |
| Heating temperature | Approximately 160 °C |
| Heating time | 2 to 3 minutes |
| Glue stick diameter | 7 mm |
| Heating element | Ceramic |
| Nozzle | Precision metal |
| Trigger | Controls glue flow |
| Indicator light | Heating indicator |
| Stand | Folding stand for upright positioning |
| Power cord | 1.5 m |
| Weight | 0.39 kg |
| Dimensions (L × W × H) | 190 × 130 × 45 mm |
| Body material | Heat-resistant plastic |
| Recommended uses | Wood, plastic, fabric, ceramic, cardboard |
| Care and cleaning | Unplug, cool down, wipe the nozzle; do not immerse |
| Safety | Do not touch the hot nozzle; keep out of reach of children; do not cover while in use |
| Spare parts and repairability | Replaceable nozzle and trigger; parts available at Vevor |
| Warranty | Manufacturer's warranty: 12 months |
Frequently Asked Questions - MM0201 Vevor
What is the heating time of the Vevor MM0201 glue gun?
The gun reaches its operating temperature in 2 to 3 minutes. The built-in light turns on to indicate that the nozzle is hot.
What glue sticks can I use with this gun?
Use hot melt glue sticks of 7 mm diameter EVA type. Insert them from the back without forcing and wait for them to melt.
How to clean the nozzle after use?
Unplug the device and let it cool completely. Wipe the nozzle with a dry cloth to remove residue. Never immerse the gun in water.
The gun no longer heats up, what should I check?
Check that the outlet works, that the cord is not damaged, and that the indicator light is on. If the problem persists, contact Vevor customer service.
Can I leave the gun plugged in unattended?
No. Like any heating device, it must be supervised during operation and unplugged immediately after use to avoid any risk of fire.
How to prevent glue from flowing continuously?
Before setting down the gun, activate the folding stand and place it on a stable surface. The flow stops as soon as you release the trigger, but slight residual dripping is normal.
What materials can I glue with this gun?
It is suitable for wood, plastic, fabric, ceramic and cardboard. For smooth materials, clean the surfaces and apply the glue in a zigzag pattern.
How to insert or change a glue stick?
Simply insert a 7 mm stick into the back of the gun, push gently until it is caught by the mechanism. Never attempt to pull a cold stick backward.
What to do if the trigger no longer slides?
Turn off and unplug the gun, let it cool, then clean the nozzle opening. If the blockage persists, disassemble the nozzle and remove the dry glue. For maintenance, use a replacement nozzle.
Does the gun require special maintenance?
After each use, unplug it and wipe the body and nozzle. Regularly check the cord and keep the ventilation slots clear to extend its lifespan.
User questions about MM0201 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Glue gun in PDF format for free! Find your manual MM0201 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MM0201 by Vevor.
USER MANUAL MM0201 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : MM0201
Category : Glue gun