FH-110691.4 - Heating Emerio - Free user manual and instructions

Find the device manual for free FH-110691.4 Emerio in PDF.

Emerio FH-110691.4 - Heating
📄 44 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Emerio FH-110691.4 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Fan heater
Brand Emerio
Model FH-110691.4
Power supply 220-240 V ~ 50 Hz
Maximum power 2000 W
Minimum power 1000 W
Heating type Ceramic
Power levels 2 (1000 W / 2000 W)
Thermostat Gradual adjustment
Oscillation Yes
Overheat protection Yes
Tip-over protection Yes
Housing material ABS plastic
Dimensions (L × D × H) 25 × 15 × 28 cm
Weight 1.5 kg
Cable length 1.5 m
Carrying handle Yes, integrated
Care Dust with a soft cloth
Cleaning Do not immerse in water
Spare parts Not available
Warranty 2 years
Usage Indoor only

Frequently Asked Questions - FH-110691.4 Emerio

How to turn on and adjust the temperature of the Emerio FH-110691.4?
To turn on the device, plug it into a suitable outlet, then turn the thermostat clockwise to the desired position. The indicator light shows that the device is heating. You can choose between two power levels (1000 W or 2000 W) using the corresponding button.
Can this heater be used in a bathroom?
No, this fan heater must not be used in a damp room such as a bathroom, unless it is fixed out of reach of water splashes. It is designed for use in dry rooms.
What to do in case of overheating?
The device has an overheat protection that automatically cuts off the power. If this happens, unplug the device, let it cool down, check that the air inlets are not blocked, then plug it back in.
How to clean the heater?
Before any cleaning, unplug the device and let it cool down. Use a soft, dry cloth to dust the grilles and the casing. Never use water or abrasive products.
Is the heater quiet?
The noise level is moderate for a fan heater. The fan produces a slight noise, comparable to that of a hairdryer on low speed. It is recommended not to install it in a bedroom if you are sensitive to noise.
Can the device be left on all night?
It is not recommended to leave a fan heater unattended at night. It is preferable to use an inertia heater for nighttime comfort. Turn off the device before sleeping.
What area can this device heat?
With a power of 2000 W, this heater is suitable for heating a room of approximately 20 to 25 m², depending on insulation and outdoor temperature.
What does the red indicator light mean?
The red light turns on when the device is in heating mode. It turns off when the thermostat reaches the set temperature, indicating that the device switches to standby mode.
How to store the heater in summer?
Clean the device, unplug it, then store it in a dry place protected from dust. It is advisable to cover it or put it in its original box to avoid dust accumulation.
Is this heater energy-efficient?
Like any electric heater, it has a 100% efficiency, but it consumes 2000 W at full power. To save energy, use the 1000 W mode for small rooms and do not run it continuously.

User questions about FH-110691.4 Emerio

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual FH-110691.4 - Emerio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FH-110691.4 by Emerio.

USER MANUAL FH-110691.4 Emerio

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Emerio

Model : FH-110691.4

Category : Heating