TBD55 - Drill SCHEPPACH - Free user manual and instructions
Find the device manual for free TBD55 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Drill press |
| Brand | Scheppach |
| Model | TBD55 |
| Power supply | 230 V, 50 Hz |
| Motor power | 550 W |
| Speeds | 16 speeds, 270-2500 rpm |
| Drilling stroke | 55 mm |
| Drilling capacity (steel) | 16 mm |
| Drilling capacity (wood) | 40 mm |
| Chuck | Keyed chuck, 1.5-16 mm |
| Table tilt | ±45° |
| Table dimensions | 200 x 200 mm |
| Column diameter | 50 mm |
| Net weight | 28 kg |
| Dimensions (L x D x H) | 400 x 400 x 800 mm |
| Main functions | Vertical drilling, angular drilling, mechanical variable speed, tilting table |
| Maintenance and cleaning | Clean after each use, lubricate moving parts with light oil |
| Safety | Wear protective goggles, do not wear loose clothing, disconnect for any intervention |
| Spare parts and repairability | Available from Scheppach customer service, references in the manual |
| General information | PDF manual of 48 pages in French, noise level 80 dB(A) |
Frequently Asked Questions - TBD55 SCHEPPACH
How to adjust the rotation speed on the TBD55 drill press?
The speed is adjusted by changing the belt on the pulleys. Refer to the correspondence table located on the cover. Important: disconnect the device before any intervention.
Which chuck should I use for this drill press?
The TBD55 is equipped with a keyed chuck with a capacity of 1.5 to 16 mm. Use cylindrical drill bits with a suitable shank.
How to replace the chuck?
The chuck is removed by unscrewing the internal safety screw. Then use an extractor to remove the Morse taper. Make sure the shaft is clean before assembly.
What maintenance does the drill press require?
Clean the dust after each use, lubricate the columns and gears with light oil. Regularly check the condition of the cable and plug.
How to change the transmission belt?
Open the side cover, loosen the tensioner, reposition the belt on the pulleys for the desired combination, then retighten. Follow the diagram on the plate.
The drill press no longer starts, what should I do?
Check the power supply, the fuse, and the condition of the cable. If the motor heats up or smells burnt, contact customer service. Never disassemble the motor yourself.
What is the drilling stroke of the TBD55?
The drilling stroke is 55 mm, which allows drilling materials of moderate thickness. For thicker parts, move the table.
Is the table tiltable?
Yes, the table can be tilted ±45° for angular drilling. Loosen the locking handle under the table, adjust the angle, then retighten.
How to obtain spare parts for this model?
Spare parts are available from Scheppach customer service. Use the parts list in the manual to order the exact references.
What safety precautions should be taken?
Always wear safety goggles and do not wear loose clothing. Securely fasten the workpiece with a vise, and disconnect the device for any adjustment.
User questions about TBD55 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual TBD55 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TBD55 by SCHEPPACH.
USER MANUAL TBD55 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : TBD55
Category : Drill