STB T13 - Drill SCHEPPACH - Free user manual and instructions
Find the device manual for free STB T13 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Drill press |
| Brand | Scheppach |
| Model | STB T13 |
| Supply voltage | 230 V / 50 Hz |
| Motor power | 350 W |
| Chuck type | Keyed self-centering chuck |
| Clamping capacity | 1.5 to 13 mm |
| Rotation speeds | 5 adjustable mechanical speeds |
| Speed range | 450 to 3000 rpm |
| Drilling stroke | 50 mm |
| Max drilling depth (steel) | 25 mm |
| Max drilling depth (wood) | 50 mm |
| Table dimensions | 200 x 200 mm |
| Column diameter | 60 mm |
| Table height | Height adjustable |
| Net weight | 12 kg |
| Device dimensions | 400 x 300 x 700 mm |
| Protection class | II |
| Safety standards | Compliant with CE directives |
| Switch | With safety lock |
| Main functions | Precision vertical drilling, angle adjustment, depth stop |
| Maintenance and cleaning | Dust the ventilation grilles, clean the chuck and grease the columns |
| Spare parts and repairability | Spare parts available from Scheppach after-sales service |
Frequently Asked Questions - STB T13 SCHEPPACH
How to change the rotation speed?
Unplug the machine, open the protective cover, move the belt on the pulleys according to the desired speed index, then close the cover again, checking the belt tension.
What type of drill bits should be used with the STB T13?
Use drill bits with a cylindrical shank with a diameter of 1.5 to 13 mm. For hard materials such as metal, choose HSS drill bits and a reduced speed.
How to set the drilling depth?
The depth stop is adjusted on the side column: unscrew the knob, position the stop at the desired depth, then tighten. Test on a piece of scrap wood.
How to replace the chuck?
Insert an Allen key into the chuck to lock the spindle, unscrew the retaining screw located inside, then remove the chuck using a puller if necessary.
Why does the drill not start?
First check the socket, cable and fuse. If the switch is defective, replace it or have it repaired by a qualified electrician.
Can you drill metal with this drill?
Yes, provided you use HSS drill bits, drill at a low speed and lubricate with cutting oil. Clamp the workpiece firmly in a vice.
How to adjust the table in height and angle?
Loosen the locking handle, slide the table along the column and tilt it if necessary using the scale. Tighten firmly before drilling.
What are the essential safety precautions?
Wear safety goggles, do not wear gloves, tie back clothing and hair, and always unplug the machine before making any adjustment or changing tools.
How to maintain the drill press?
After each use, dust the ventilation grilles, clean the table and chuck with a dry cloth, and lubricate the columns with a light oil.
What accessories are included?
The drill comes with a chuck key, a fork wrench for table adjustment and the instruction manual. Accessories may vary depending on the batch.
User questions about STB T13 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual STB T13 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STB T13 by SCHEPPACH.
USER MANUAL STB T13 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : STB T13
Category : Drill