CV1100 - Drill SCHEPPACH - Free user manual and instructions
Find the device manual for free CV1100 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Pillar drill |
| Brand | SCHEPPACH |
| Model | CV1100 |
| Rated power | 1100 W |
| Supply voltage | 230 V |
| Frequency | 50 Hz |
| Rotation speeds | 240 to 2600 rpm |
| Drilling capacity wood | 45 mm |
| Drilling capacity steel | 20 mm |
| Spindle travel | 100 mm |
| Chuck type | Key chuck, capacity 16 mm |
| Column diameter | 80 mm |
| Dimensions (H x W x D) | 1500 x 500 x 650 mm |
| Net weight | 78 kg |
| Thermal protection | Yes |
| Emergency stop | Yes |
| Noise level | 74 dB(A) |
| Maintenance and cleaning | Regular cleaning, lubricate the slides |
| Spare parts | Available via SCHEPPACH after-sales service |
| Intended use | Vertical drilling in wood and metals |
Frequently Asked Questions - CV1100 SCHEPPACH
How to adjust the rotation speed of the SCHEPPACH CV1100?
The speed is adjusted by moving the belt on the pulleys. Consult the speed table displayed on the cover. To change speed, first switch off the power supply then open the cover, loosen the tension screw, move the belt, then re-tension it.
What is the maximum drilling capacity of the CV1100?
The drilling capacity depends on the material. In wood, the maximum capacity is 45 mm, and in steel 20 mm. Use appropriate drill bits and lubricate the bit for metals.
How to replace the drill chuck?
To remove the chuck, insert a hexagonal drill bit and strike it with a hammer. You can also use a chuck extractor. After removal, clean the taper and fit the new chuck by tightening it firmly.
How to maintain the drill press to extend its service life?
Clean the machine after each use, dust off the ventilation grilles. Lubricate the moving parts such as the slides and pivot points with a light oil. Regularly check the condition of the belt and the chuck.
What safety equipment should be used with the CV1100?
Always wear safety glasses, hearing protection and avoid loose clothing. Use the protective cover first. Secure the workpiece with a vise or clamp. In case of blockage, the emergency stop immediately cuts off the motor.
The drill no longer starts, what to do?
First check the electrical supply and the fuse. Make sure the emergency stop is not engaged. If the motor is overheating, the thermal protection may have cut off the circuit. Let it cool down then switch it back on.
Which accessories are compatible with the CV1100?
The CV1100 accepts standard drill bits with a chuck up to 16 mm. You can use drill vices, depth stops and LED lights to improve precision. Check the accessories in the SCHEPPACH range.
How to change the drive belt?
Switch off the power, open the top cover. Release the belt by loosening the tension screw. Remove the old belt from the pulley grooves, replace it with a new identical one, then re-tension and re-tighten. Follow the instructions in the manual.
How to prevent the drill bit from breaking during drilling?
Use a speed suitable for the material and drill bit diameter. Start with a center punch to guide the bit. Apply regular pressure and not too much force. For metal, use a cutting lubricant to reduce friction.
Where to find spare parts for the CV1100?
Spare parts are available from SCHEPPACH after-sales service. You can order online on the official website or from authorized dealers. Have the serial number and the model of the machine at hand.
User questions about CV1100 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual CV1100 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CV1100 by SCHEPPACH.
USER MANUAL CV1100 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : CV1100
Category : Drill