STB T16 - Drill SCHEPPACH - Free user manual and instructions
Find the device manual for free STB T16 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bench pillar drill |
| Brand | Scheppach |
| Model | STB T16 |
| Drilling capacity in steel | 16 mm |
| Drilling capacity in wood | 40 mm |
| Chuck type | Keyed chuck, 1.5 - 13 mm |
| Rated voltage | 230 V |
| Rated frequency | 50 Hz |
| Rated power | 400 W |
| Number of speeds | 5 |
| Speed range | 520 - 2580 rpm |
| Spindle travel | 45 mm |
| Table dimensions | 160 x 160 mm |
| Base dimensions | 320 x 240 mm |
| Column diameter | 46 mm |
| Overall height | 640 mm |
| Net weight | 22 kg |
| Main functions | Drilling in wood, metal and plastic; adjustable depth stop; tiltable drill table |
| Cleaning and maintenance | Remove dust after use, wipe with dry cloth, lubricate chuck and column periodically |
| Safety equipment | Emergency stop, transparent chuck guard, V-belt cover, non-slip base |
| Spare parts and repairability | Spare parts via Scheppach service; replaceable chuck, V-belt, switches and handles |
| Included accessories | Chuck key, table insert, Allen key, operating manual |
Frequently Asked Questions - STB T16 SCHEPPACH
What is the maximum drilling capacity of the Scheppach STB T16?
The machine can drill up to 16 mm in steel and up to 40 mm in wood. Use suitable drill bits and reduce speed for metal.
How do I change the speed on the STB T16?
Open the belt cover, loosen the motor bracket screws, move the V-belt to another pulley step, then tension the belt and retighten the screws. The five steps give a speed range of 520 to 2580 rpm.
What type of chuck is fitted to the STB T16?
It is equipped with a keyed drill chuck with a capacity of 1.5 to 13 mm. Always tighten it with the supplied chuck key.
Can the drill table be tilted?
Yes, the table can be tilted left and right and adjusted in height. Loosen the locking handle, set the desired angle and re-tighten it securely.
What safety devices does the STB T16 have?
The machine has an emergency stop, a protective chuck guard and a V-belt cover. Always close the guards before starting work.
How should I maintain the Scheppach STB T16?
Keep the drill clean, wipe off dust and chips, and lightly lubricate the chuck, spindle and column. Check the V-belt tension regularly and replace it if worn.
Does the STB T16 have a depth stop?
Yes, the machine is fitted with an adjustable depth stop. Set it to repeat the desired hole depth without measuring each time.
Can I drill plastic with the STB T16?
Yes, plastic can be drilled. Use sharp bits and a low speed to avoid melting; clamp the workpiece securely before starting.
Where can I get spare parts for the STB T16?
Spare parts are available from Scheppach service centers and authorized dealers. Quote the model STB T16 and the serial number when ordering.
Why is the drill running slowly or stopping under load?
Check that the V-belt is positioned correctly and properly tensioned. Also ensure the speed is high enough for the bit size and that you are not applying excessive pressure.
User questions about STB T16 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual STB T16 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STB T16 by SCHEPPACH.
USER MANUAL STB T16 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : STB T16
Category : Drill