STP 500 E - Saw EINHELL - Free user manual and instructions
Find the device manual for free STP 500 E EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Jigsaw |
| Brand | Einhell |
| Model | STP 500 E |
| Rated power | 500 W |
| Supply voltage | 230 V / 50 Hz |
| No-load stroke speed | 0 to 3000 min-1 |
| Blade stroke | 20 mm |
| Cutting depth in wood | 75 mm |
| Cutting depth in steel | 8 mm |
| Cutting depth in aluminum | 15 mm |
| Bevel cut | 0 to 45 degrees |
| Net weight | Approximately 2.2 kg |
| Cable length | 2 m |
| Blade attachment | With hex key |
| Sawdust blower | Adjustable |
| Vacuum connection | Yes |
| On/off switch | With safety lock |
| Protection class | II |
Frequently Asked Questions - STP 500 E EINHELL
How do I replace the blade on the Einhell STP 500 E jigsaw?
To replace the blade, first unplug the tool. Use the supplied hex key to loosen the fixing screw, remove the old blade, insert a new compatible blade making sure the teeth point forward, then retighten the screw.
How do I adjust the cutting speed?
The stroke speed is adjustable via the adjustment wheel. Turn it to choose a speed suitable for the material: low for metals, high for soft wood.
Can curved cuts be made with this model?
Yes, you can make straight, curved, and bevel cuts. For tight curves, use a narrow blade and advance slowly.
How do I prevent the wood from splintering on the surface?
Use a fine-tooth blade, set a moderate speed, and place the visible side of the wood face down if possible. You can also stick adhesive tape on the cutting line.
What type of blade is suitable for cutting metal?
Use a metal blade with high-speed steel (HSS) teeth. At reduced speed, you can cut sheets up to 8 mm thick.
How do I maintain the cutting guide and the sole plate?
Clean the sole plate regularly and check its parallelism. Use a damp cloth and dry. Check that the fixing screws are not loose.
What to do if the jigsaw no longer starts?
First check the power outlet and the power cable. Then check the motor carbon brushes. If the problem persists, contact Einhell after-sales service.
Can I use an electrical extension cord?
Yes, use an extension cord suitable for the power of the tool (at least 1.5 mm² cross-section). Fully unwind the cord and avoid cord reels.
How do I adjust the bevel cut?
Loosen the locking screw under the sole plate, tilt the sole plate to the desired angle (up to 45°), then retighten the screw firmly. The angle mark allows precise reading.
What safety precautions are essential?
Wear safety goggles, gloves, and a dust mask. Never place your hands on the cutting line and wait for the blade to come to a complete stop before removing the workpiece.
User questions about STP 500 E EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual STP 500 E - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STP 500 E by EINHELL.
USER MANUAL STP 500 E EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : STP 500 E
Category : Saw