TC-CS 1410/184 - Saw EINHELL - Free user manual and instructions
Find the device manual for free TC-CS 1410/184 EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Circular saw |
| Brand | Einhell |
| Model | TC-CS 1410/184 |
| Power supply | 230 V AC, 50 Hz |
| Motor power | 1410 W |
| No-load speed | 4500 rpm |
| Saw blade diameter | 184 mm |
| Saw blade bore | 20 mm |
| Max cutting depth at 90° | 66 mm |
| Max cutting depth at 45° | 42 mm |
| Bevel cut range | 0° - 45° |
| Weight | 4.2 kg |
| Dimensions (L x W x H) | 45 x 25 x 30 cm |
| Laser guide | Yes |
| Parallel guide | Included |
| Dust extraction port | 35 mm |
| Spindle lock | Yes |
| Safety switch | Double-pole trigger |
| Power cord length | 2 m |
| Protection class | II (double insulated) |
| Vibration level | 4.5 m/s² |
| Sound pressure level | 96 dB(A) |
| Maintenance and cleaning | Regular cleaning, blade inspection, and dust removal |
| Spare parts and repairability | Spare parts available for 10 years |
Frequently Asked Questions - TC-CS 1410/184 EINHELL
How do I change the saw blade on the Einhell TC-CS 1410/184?
First unplug the saw. Press the spindle lock to hold the blade. Use the included hex key to loosen the center screw. Remove the outer flange and old blade, then install the new blade with the teeth facing the correct direction. Tighten the screw while keeping the spindle lock engaged.
What is the maximum cutting depth of this circular saw?
The maximum cutting depth is 66 mm at 90° and 42 mm at 45°. Always adjust the depth to be slightly deeper than the material thickness.
Can I cut metal with the TC-CS 1410/184?
This saw is designed for wood and wood-based materials. To cut metal, you would need a special metal cutting blade, but the saw's speed and safety features may not be optimal. It is recommended to use a dedicated metal cutting saw.
How often should I clean the saw?
After each use, clean visible dust and chips. Periodically open the lower guard and remove any buildup. Use compressed air or a brush, and wipe with a dry cloth. Never use water or solvents.
Why won't my saw start?
Check the power cord and plug. Ensure the switch is fully depressed. If the saw still does not start, check the carbon brushes and fuse. If the problem persists, contact Einhell customer service.
How do I adjust the cutting angle for bevel cuts?
Loosen the bevel adjustment knob at the front. Tilt the base plate to the desired angle (up to 45°). Tighten the knob to secure. Use a protractor for accuracy.
How do I use the parallel guide for straight cuts?
Insert the parallel guide rods into the base plate. Slide it to set the cutting width against the workpiece edge. Tighten the locking screws. The guide ensures a straight parallel cut.
Can I connect a vacuum cleaner to the saw?
Yes, the saw has a dust extraction port (35 mm diameter). Connect a compatible vacuum or dust extractor to keep the workspace clean and improve visibility.
What safety equipment should I use when operating the saw?
Always wear safety goggles, ear protection, and a dust mask. Use a push stick for small pieces and keep hands away from the blade. Wear appropriate gloves and clothing.
What should I do if the blade gets stuck while cutting?
Immediately switch off and unplug the saw. Do not try to force the blade out. Gently pull the saw back if possible, or use a pry bar to create space. Inspect the blade for damage before continuing.
User questions about TC-CS 1410/184 EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual TC-CS 1410/184 - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC-CS 1410/184 by EINHELL.
USER MANUAL TC-CS 1410/184 EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : TC-CS 1410/184
Category : Saw