BVP 19000 - Water pump AL-KO - Free user manual and instructions
Find the device manual for free BVP 19000 AL-KO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Submersible water pump |
| Brand | AL-KO |
| Model | BVP 19000 |
| Category | Water pump |
| Recommended use | Drainage, irrigation, basement draining |
| Dimensions (H × W × D) | Approximately 45 × 25 × 25 cm |
| Net weight | Approximately 8.5 kg |
| Power supply | 230 V / 50 Hz |
| Rated power | 800 W |
| Maximum flow rate | 19,000 L/h |
| Maximum delivery head | 10 m |
| Maximum immersion depth | 7 m |
| Permitted particle size | Up to 30 mm |
| Discharge connection | Thread G1¼ |
| Main functions | Fast pumping, automatic float, dry-run protection |
| Maintenance and cleaning | Rinse with clean water after use; regularly check the strainer |
| Safety | Class II, thermal safety switch |
| Spare parts and repairability | Seal kit and pump impeller available online |
| General information | User manual available in 12 languages |
| Package contents | Pump, fittings, user manual |
Frequently Asked Questions - BVP 19000 AL-KO
What is the maximum delivery head of the BVP 19000 pump?
The maximum delivery head is 10 meters. This allows water to be raised to a sufficient height for most domestic uses such as watering or basement draining.
Can the pump operate continuously?
Yes, the pump is designed for continuous operation with an automatic float. It stops and restarts according to the water level, which prevents dry running and extends its service life.
How to install the pump in a well?
Place the pump at the bottom of the well, making sure it is upright and stable. Connect a discharge hose of appropriate diameter (G1¼) and plug it into a 230 V socket. The float must be free to detect the water level.
What to do if the pump does not start?
First check the power supply and the fuse. Make sure the float is not stuck in the high position. Also check that the strainer is not blocked by debris. If the problem persists, consult the user manual for troubleshooting instructions.
Can sand-containing water be pumped?
The pump can accept particles of 30 mm maximum. Fine sand passes without any problem, but an excessive amount of sand can prematurely wear the impeller. Use an upstream filter if you are pumping heavily loaded water.
How to clean the pump after use?
Rinse the pump with clean water after each use, especially if you have pumped dirty water. Disassemble the strainer to clean it and check the impeller to remove any residues. Dry the pump before storing it.
What is the maximum length of the power cable?
The integrated power cable is generally 10 meters long. If you need to connect it further away, use an extension cord of appropriate cross-section, ensuring protection against water splashes.
Is the float adjustable?
Yes, the float position can be adjusted to change the start and stop levels. Consult the manual for the exact adjustment procedure.
How to winterize the pump?
Drain the pump and hose completely before winter. Clean it thoroughly and store it in a frost-free place, ideally in an upright position. Remove the float if possible to avoid any damage.
Where to find spare parts?
You can find spare parts such as the seal kit or the pump impeller on the AL-KO manufacturer's website or from authorized dealers. The user manual contains a list of spare parts with their references.
User questions about BVP 19000 AL-KO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual BVP 19000 - AL-KO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BVP 19000 by AL-KO.
USER MANUAL BVP 19000 AL-KO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AL-KO
Model : BVP 19000
Category : Water pump