SCHEPPACH

BLS7L - Log splitter SCHEPPACH - Free user manual and instructions

Find the device manual for free BLS7L SCHEPPACH in PDF.

📄 88 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SCHEPPACH BLS7L - page 24
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Log splitter
Brand Scheppach
Model BLS7L
Splitting force 7 tons (68 kN)
Motor power 2200 W (2.2 kW)
Power supply 230 V / 50 Hz
Operation mode Horizontal
Max log length 1050 mm
Max log diameter 250 mm
Hydraulic oil type HLP 32
Hydraulic oil capacity 3.5 L
Max pressure 190 bar
Cycle time 11 s
Weight 46 kg
Dimensions (L x W x H) 660 x 570 x 1070 mm
Safety equipment Pressure relief valve, two-hand control, anti-tip stand
Maintenance Check oil level regularly, clean after use, lubricate moving parts
Spare parts Available filters, seals, valves and control levers

Frequently Asked Questions - BLS7L SCHEPPACH

What is the splitting force of the Scheppach BLS7L?
The BLS7L delivers a splitting force of 7 tons (around 68 kN), making it suitable for splitting medium-sized logs for heating.
What type of hydraulic oil should I use?
Use a high-quality hydraulic oil HLP 32 or equivalent. The oil tank capacity is approximately 3.5 liters.
How often should I change the hydraulic oil?
For the first time, change the hydraulic oil after 50 operating hours, then every 500 hours or at least once a year.
Can I use the log splitter vertically?
No, the Scheppach BLS7L is designed for horizontal operation only. It cannot be locked in a vertical position.
What safety precautions should I take while operating?
Always wear safety goggles and gloves. Keep hands away from the splitting area, use the two-hand control and never reach across the log during splitting.
Why is my log splitter not developing full force?
Check the hydraulic oil level, ensure the motor is spinning smoothly, and inspect for air leaks or a clogged oil filter. Low oil is the most common cause.
How do I maintain the log splitter?
Regularly clean sawdust and debris from the hydraulic pump and wedge. Grease the slide rail and check all bolts for tightness before each use.
What is the maximum log size I can split?
The maximum log length is 1050 mm and the recommended maximum diameter is 250 mm. Larger logs may not fit or require pre-splitting.
How should I store the log splitter?
Store in a dry place, protect the motor from moisture, and keep the hydraulic cylinder fully retracted to prevent rust and damage to seals.
Are spare parts easy to find?
Yes, Scheppach offers original spare parts such as hydraulic pumps, valves, seals, and control levers, available through authorised dealers or online spare part shops.

User questions about BLS7L SCHEPPACH

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Log splitter in PDF format for free! Find your manual BLS7L - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BLS7L by SCHEPPACH.

USER MANUAL BLS7L SCHEPPACH

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SCHEPPACH

Model : BLS7L

Category : Log splitter