HL660o - Log splitter SCHEPPACH - Free user manual and instructions
Find the device manual for free HL660o SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Horizontal Log Splitter |
| Brand | Scheppach |
| Model | HL660o |
| Splitting Force | 6 tons |
| Max Log Length | 660 mm |
| Max Log Diameter | 250 mm |
| Motor Power | 1500 W |
| Power Supply | 230 V / 50 Hz |
| Hydraulic Oil Capacity | 3.5 L |
| Oil Type | Hydraulic oil ISO VG 32 |
| Dimensions (L x W x H) | 110 x 60 x 75 cm |
| Net Weight | 85 kg |
| Cycle Time | 11 seconds (advance) / 7 seconds (return) |
| Operating Position | Horizontal |
| Emergency Stop | Yes |
| Wheels for Transport | Yes |
| Safety Guard | Yes |
| Maintenance | Check hydraulic oil level regularly; change oil after 50 hours of operation |
| Cleaning | Wipe with damp cloth; do not use solvents |
| Spare Parts Availability | Available from manufacturer or authorized dealers |
Frequently Asked Questions - HL660o SCHEPPACH
What type of hydraulic oil does the Scheppach HL660o use?
The Scheppach HL660o requires hydraulic oil ISO VG 32. The capacity is approximately 3.5 liters.
How do I change the hydraulic oil in the HL660o?
To change the oil, place a container under the drain plug, remove the plug, let the oil drain completely, then refill with fresh ISO VG 32 oil through the top cap. Dispose of old oil properly.
What is the maximum log length I can split?
The maximum log length is 660 mm. Logs longer than this cannot be accommodated.
How do I start the log splitter?
Plug the machine into a grounded 230V outlet, ensure the emergency stop is released, and press the green start button. Wait for the pump to build pressure before feeding logs.
Why is the splitter not moving?
Check if the emergency stop is pressed, the power cord is connected, and the thermal overload switch has not tripped. If the motor runs but the ram does not move, the hydraulic oil may be low or the pump may need priming.
Can I split logs with the grain?
Yes, the horizontal design allows splitting logs along the grain. Place the log on the cradle and align it with the wedge.
What safety precautions should I take?
Always wear safety glasses and gloves. Keep hands away from the wedge and moving parts. Use the two-hand control to keep both hands safe. Do not wear loose clothing.
How often should I check the oil level?
Check the oil level before each use. The oil sight glass should show oil in the middle. Top up if necessary with ISO VG 32.
What does the thermal overload switch do?
The thermal overload switch protects the motor from overheating. If it trips, wait 10 minutes for the motor to cool, then press the reset button.
Where can I find spare parts?
Spare parts are available from Scheppach authorized dealers or online. Refer to the parts list in the manual for part numbers.
User questions about HL660o SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Log splitter in PDF format for free! Find your manual HL660o - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HL660o by SCHEPPACH.
USER MANUAL HL660o SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : HL660o
Category : Log splitter