Ox t800 - Log splitter SCHEPPACH - Free user manual and instructions
Find the device manual for free Ox t800 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Log splitter |
| Brand | Scheppach |
| Model | OX T800 |
| Intended use | Splitting firewood |
| Splitting force | 8 tonnes |
| Motor power | 3000 W |
| Supply voltage | 230 V / 50 Hz |
| Max log length | 650 mm |
| Max log diameter | 250 mm |
| Splitting stroke | 420 mm |
| Cycle time | 4.5 seconds |
| Hydraulic oil capacity | 3.5 litres |
| Hydraulic oil type | HLP 32 |
| Operating positions | Horizontal and vertical |
| Frame material | Heavy-duty steel |
| Mobility | Integrated wheels and handle |
| Safety features | Two-hand operation, emergency stop, overload protection |
| Maintenance | Regular oil level check, cleaning of hydraulic components |
| Spare parts availability | Scheppach service network, replaceable filters and seals |
| Included accessories | Operating manual, push block |
| Warranty | 2 years |
| Certification | CE, GS |
Frequently Asked Questions - Ox t800 SCHEPPACH
What type of log splitter is the Scheppach OX T800?
The Scheppach OX T800 is a log splitter designed for splitting firewood. It supports both horizontal and vertical operation, making it versatile for various log sizes and splitting needs.
What is the maximum splitting force of the OX T800?
The OX T800 delivers a powerful splitting force of up to 8 tonnes, allowing it to handle hard and large logs with ease.
How do I change the hydraulic oil on the OX T800?
To change the hydraulic oil, place the splitter on a level surface, remove the oil drain plug underneath, and let the old oil drain into a container. Replace the plug, fill with HLP 32 hydraulic oil up to the correct level (approx. 3.5 litres), and check for leaks before operating.
Can the OX T800 be used horizontally and vertically?
Yes, the OX T800 features a convertible design. In horizontal mode, it is ideal for smaller logs and quick splitting. In vertical mode, it handles larger and heavier logs by positioning them vertically on the splitting table.
What safety precautions should I take while using the OX T800?
Always use the two-hand operation feature to keep both hands on the controls during the splitting cycle. Wear safety goggles and gloves, ensure the log is securely seated, and never split logs shorter than 300 mm to prevent jamming.
How do I transport the OX T800?
The splitter is equipped with integrated wheels and a handle. Tilt the machine slightly by lifting the rear foot, then roll it to the desired location. Lock the wheels before operating and ensure the handle is folded away during use.
What maintenance does the OX T800 require?
Regularly check the hydraulic oil level and top up if needed. Clean the splitting table and hydraulic piston after each use. Inspect the hoses and seals for damage, and tighten any loose bolts. Grease moving parts periodically.
What should I do if the OX T800 does not start?
First, check the power connection and ensure the emergency stop is reset. Verify the on/off switch is in the correct position. If the motor hums but doesn't turn, the hydraulic oil may be too cold; warm it up by letting the machine run idle. If the problem persists, contact a qualified electrician or Scheppach service.
What logs are suitable for the OX T800?
The OX T800 can split logs up to 650 mm in length and 250 mm in diameter. It handles both hardwoods and softwoods, but for hardwoods, ensure the grain is aligned with the splitting direction for best results.
Where can I find spare parts for the OX T800?
Spare parts are available through the Scheppach service network. You can order from authorized dealers or the official website. Common replacements include seals, filters, and the emergency stop switch. Always use genuine Scheppach parts for safety and compatibility.
User questions about Ox t800 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Log splitter in PDF format for free! Find your manual Ox t800 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ox t800 by SCHEPPACH.
USER MANUAL Ox t800 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : Ox t800
Category : Log splitter