Facecare Faceneck Pro - Face cleansing CECOTEC - Free user manual and instructions

Product type	Face and neck cleanser
Brand	Cecotec
Model	FaceCare Face&Neck Pro
Category	Facial cleansing
Intended use	Household use only
Power supply	Rechargeable lithium-ion battery
Battery type	Lithium-ion, non-replaceable
Light source	Built-in LED
Operating temperature	Avoid extreme temperatures
Humidity and liquids	Avoid any contact with water and liquids
Care	Clean with a soft cloth, avoid abrasive products
Safety - LED	Do not look directly at the light
Safety - Battery	Do not expose to high heat, risk of explosion
Repairability	No repairable parts, contact official service
Instruction manual	Available in multiple languages (FR, DE, ES, HU, AR)
Product code	EU01_116294_FaceCare Face&Neck Pro

Frequently Asked Questions - Facecare Faceneck Pro CECOTEC

What is the main use of the FaceCare Face&Neck Pro device?

It is a face and neck cleanser intended for household use. It cleans the skin of the face and neck while providing care thanks to its LED light source.

How to clean the device?

Use a soft cloth and avoid caustic or abrasive cleaners that could damage the device's surface.

Can the battery be replaced?

No, the battery is non-replaceable. In case of a defect, contact the Official After-Sales Service of Cecotec.

What happens if the battery is swallowed?

Ingesting the battery can cause burns, tissue perforation, and even death. Consult a doctor immediately if this occurs.

Can I use the device in the shower or bath?

No, the device must be kept away from water and any liquid. Do not expose it to moisture.

Why should you not look directly at the LED light?

The LED light source can be harmful to the eyes. Do not look directly at the light to avoid any risk.

What is the safety level for children?

The device can be used by children aged 8 and above under supervision and with instructions. Children must not play with the device or perform cleaning.

What to do if the device is damaged?

Do not use a product with visible damage. Contact the Official After-Sales Service for any repair, do not attempt to open the device.

How to maintain the battery to prolong its lifespan?

Make sure the battery is charged to 100% if the product remains unused for a long time. Avoid high temperatures and fire.

What to do in case of battery leakage?

In case of leakage, do not touch the liquid. Immediately wash any contact area with soap and water. Contact your doctor if there is eye contact.

USER MANUAL Facecare Faceneck Pro CECOTEC

EN • The coding in this manual is generic and applies to all code variants of the appliance.

Read the following instructions carefully before using the appliance. Keep this instruction manual for future reference or new users.

• This appliance is intended for domestic use only and is not suitable for use in commercial establishments such as bars, restaurants, farms, hotels, motels, and offices.
• This appliance can be used by children aged from 8 years and above and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and

user maintenance must not be carried out by unsupervised children.

• Keep the appliance and its packaging out of the reach of children and animals when unsupervised.
• Do not use the appliance if it shows visible signs of damage. In case of malfunction, contact the official Cecotec Technical Support Service.
• Do not try to open, disassemble, or repair the appliance by yourself. There are no serviceable parts inside the appliance.
• Keep the appliance away from heat sources.
• Do not use the appliance outdoors. Do not expose the appliance to extreme temperatures, moisture, wet conditions or direct sunlight.
• Cecotec accepts no liability for damage caused

by improper or incorrect use.

• Keep water and other liquids away from the appliance.
• Wide temperature variations could cause condensation. In this case, allow the appliance to go back to room temperature before use.
• Do not use caustic or abrasive cleaning materials to clean the appliance, this could damage the surface.
• This device contains an LED light source, do not look directly into the light.

Battery instructions

- This appliance contains an irreplaceable battery.

• This appliance includes a Li-ion battery. Do not incinerate or expose it to high temperatures, as it may explode.
• Non-rechargeable batteries must not be recharged.

• Leaks from the battery or cells can occur under extreme conditions. Do not touch any liquid that leaks from the battery. If the liquid comes into contact with skin, wash immediately with soap and water. If the liquid gets into the eyes, wash them immediately with clean water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle the battery and dispose of it immediately in accordance with local regulations.

• When the device is stored and not used for long periods of time, ensure that the battery pack is fully charged.

• Keep batteries out of the reach of children when there is a risk of ingestion.
• Battery ingestion can cause burns, soft tissue perforation and death. Severe burns may occur within two hours of ingestion.
• In case of battery ingestion, please seek medical help immediately.
• Avoid contact between the batteries and small metal objects such as paper clips, coins, keys, nails, or screws.
• The battery must be removed from the device before disposal.
• The device must be disconnected from the

power supply when the battery is removed.

• The battery must be removed for safe disposal.
• The supply terminals must not be short-circuited.

INSTRUCTIONS DE SÉCURITÉ

1. Massage head
2. LED light
3. Intensity level indicator lights
4. Intensity setting button
5. Mode indicator lights
6. Power/mode selection button
7. Charging port
8. Charging cable

NOTE:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance comes in a packaging designed to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact Cecotec's Official Technical Support Service immediately.
• Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.

Box content

• FaceCare Face&Neck Pro
• Charging cable
• Instruction manual

3. OPERATION

Before first use

The device will be partially charged when first removed from the packaging. Make sure it is fully charged before use.

Charging the device

Connect the charging cable to the device's USB-C port and plug the other end into a compatible adapter.

During charging, the intensity indicator lights will illuminate. When the device is fully charged, the intensity indicator lights will turn off.

The device takes approximately 3 hours to fully charge. Once charged, you can use the device for 4 complete 6-minute cycles.

Please note that the device cannot be used while charging.

Switching on/off

Press and hold the power/mode selection button for 2 seconds to switch on the device.

NOTE: During initial use, the device may emit a slight plastic odour. This is completely normal and will disappear with use.

The device will automatically switch off if the battery level is low. Ensure the device is fully charged before switching it on again to maintain optimal performance.

The device will automatically switch off after 6 minutes.

To switch off the device, press and hold the power/mode selection button for 2 seconds.

Always switch off the device after use.

T

ENGLISH

he device features mode memory: it will retain the last used mode when next switched on.

Brighten mode

Press the power/mode selection button repeatedly until the Brighten mode is selected. The mode indicator light will illuminate.

This mode combines green light, heat, EMS microcurrents and intermittent vibration.

There are 5 intensity levels available. Press the intensity adjustment button to select the desired level; the number of indicator lights illuminated corresponds to the selected level.

When using the device for the first time, start with the lowest intensity level (level 1) and gradually increase.

Tighten mode

Press the power/mode selection button repeatedly until the Tighten mode is selected. The mode indicator light will illuminate.

This mode combines red light, heat, EMS microcurrents and continuous

vibration.

There are 5 intensity levels available. Press the intensity adjustment button to select the desired level; the number of indicator lights illuminated corresponds to the selected level.

When using the device for the first time, start with the lowest intensity level (level 1) and gradually increase.

Soothe mode

Press the power/mode selection button repeatedly until the Soothe mode is selected. The mode indicator light will illuminate.

This mode combines blue light, heat, EMS microcurrents and intermittent vibration (2 short pulses and 1 long pulse).

There are 5 intensity levels available. Press the intensity adjustment button to select the desired level; the number of indicator lights illuminated corresponds to the selected level.

When using the device for the first time, start with the lowest intensity level (level 1) and gradually increase.

When using the device

Switch on the device and select the desired mode and intensity. You may use the device alone or with your regular cream, serum or mask to enhance product absorption.

Glide the device across your face, following the contours of your face and neck.

When you have finished using the device, switch it off by pressing the power button.

Clean and dry the device after use and before storage.

NOTE:

• The device features a zone change alert every 60 seconds. Do not use the device on the same area for longer than 60 seconds.
• The massage head temperature during use is approximately 42° C.
• Vibration and EMS microcurrents will not activate until the massage head makes contact with the skin.

4. CLEANING AND MAINTENANCE

• Switch off the facial device before cleaning it.
• Use a soft, damp cloth to clean the product surface after each use.
• Do not use abrasive sponges, powders, or cleaning products to clean the device.
• Dry the product thoroughly after cleaning and store in a dry place away from direct sunlight.
• If not using the device for an extended period, make sure you fully discharge and recharge the battery at least once every 6 months.

5. TROUBLESHOOTING

Problem	Possible causes	Solution
The device is not working properly.	The battery is discharged.	Charge the device as indicated in this instruction manual.
The device switches off.	The battery has run out of power.	Charge the device.
	The usage cycle has been completed, and the device has switched off automatically.	Switch the device back on by pressing the power button.
EMS microcurrents are not noticeable.	The selected intensity level is too low.	Press the intensity adjustment button to select a higher level.
	Your skin is resistant to microcurrents.	Use a gel or lotion to enhance the EMS microcurrent effect.

NOTE: If the device still does not function properly after trying the above

solutions, stop using it and contact Cecotec's Official Technical Support Service.

6. BATTERY DISPOSAL

This device contains a lithium battery. Before disposing of the product at the end of its useful life, remove the battery and dispose of it in accordance with local regulations.

To do so (Fig. 2):

IMPORTANT: Ensure the device is completely discharged.

1. Using a lever tool, remove the base of the product.
2. Unscrew and remove the 2 screws beneath the base.
3. Using a lever tool, remove the massage head. Disconnect it from the mainboard.
4. Cut and remove the silicone covering the main body.

5. Remove the silicone screw covers using a lever tool or flat-head screwdriver and remove the 6 screws joining the two main body parts. Separate the parts.

6. Disconnect the two lower connections from the mainboard.

7. Remove the 3 screws securing the mainboard to the body.
8. Carefully separate the battery from the back of the board and remove it.

7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its service life, you must remove the batteries/accumulators and take it to a collection point designated by local authorities.

For detailed information on how to properly dispose of electrical and electronic equipment and/or the corresponding batteries, consumers should contact their local authorities.

Compliance with the above guidelines will help to protect the environment.

8. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

9. SIMPLIFIED EU DECLARATION OF CONFORMITY

CE Cecotec Innovaciones hereby declares that this appliance complies with the essential requirements and other relevant provisions of applicable European Union regulations. This appliance has been designed, manufactured and tested in compliance with required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity

1. PIÈCES ET COMPOSANTS

Img. 1

2

3

4

5

6

7

8
Fig./Img./Abb./Afb./Rys. 2

www.cecotec.es