DS935 - Sander SCHEPPACH - Free user manual and instructions
Find the device manual for free DS935 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Combination belt and disc sander |
| Brand | Scheppach |
| Model | DS935 |
| Input voltage | 230 V ~ 50 Hz |
| Power consumption | 500 W |
| Motor type | Induction motor |
| Belt size | 150 x 1220 mm |
| Belt speed | 13.5 m/s |
| Disc diameter | 150 mm |
| Disc speed | 1420 rpm |
| Sanding table dimensions | 150 x 250 mm |
| Table tilt range | 0° - 45° |
| Dust extraction port | 35 mm |
| Dimensions (L x W x H) | 480 x 290 x 340 mm |
| Weight | 22 kg |
| Sound pressure level | 80 dB(A) |
| Belt sanding capacity | Ideal for stock removal and smoothing |
| Disc sanding capacity | Suitable for curved profiles and fine finishing |
| Included accessories | Sanding belt, sanding disc, miter gauge, dust bag |
| Maintenance | Clean with vacuum, inspect carbon brushes periodically |
| Safety features | Protective disc guard, belt cover, push blocks |
| Repairability | Spare parts available, replaceable carbon brushes |
Frequently Asked Questions - DS935 SCHEPPACH
How do I change the sanding belt on the Scheppach DS935?
First unplug the sander. Release the belt tension by moving the tension lever, then slide the old belt off. Fit the new belt size 150 x 1220 mm over the two drums, making sure the directional arrow matches. Re-tension and adjust tracking using the knob.
What size sanding disc does the DS935 use?
The DS935 uses a 150 mm sanding disc with a standard hook-and-loop or adhesive backing. The disc is easily replaced by peeling off the old one and pressing a new one onto the platen.
Can I use the DS935 to sand metal?
Yes, but only for dry sanding of soft metals like aluminum. Always use appropriate sanding media and keep sparks away. For steel and hard metals, use a coarser grit and apply light pressure.
How do I connect a dust extraction system to the DS935?
Connect a shop vacuum or dust extractor to the 35 mm dust port on the rear of the sander. Ensure the hose fits securely and the vacuum is rated for fine dust to maintain a clean workspace.
Is the DS935 suitable for stationary use?
Yes, the DS935 is a bench-mounted sander. It must be securely bolted to a stable workbench using the pre-drilled holes in the base to prevent movement during operation.
How do I adjust the sanding table angle?
Loosen the lock handle under the table, tilt the table to the desired angle using the 0-45 degree scale, and retighten the handle. For the belt side, the table can also be set vertically for edge sanding.
What maintenance does the DS935 require?
Regularly remove sawdust from the housing and motor vents. Inspect the carbon brushes after 50 working hours and replace them if worn. Check belt tension and disc platen fasteners. Lubricate moving parts sparingly.
Does the DS935 come with sanding belts and discs included?
Yes, it typically includes one sanding belt and one sanding disc in a medium grit, plus a miter gauge and dust bag. Replacement media are widely available.
How do I replace the carbon brushes on the DS935?
Unplug the sander and remove the brush caps located on the motor housing. Slide out the worn brushes and insert new ones, ensuring they sit in the holders. Replace the caps. Run the sander for a few minutes to seat the brushes.
How do I ensure the sanding belt tracks correctly?
With the belt tensioned, switch on the sander and turn the tracking knob until the belt runs centered on the drums. If the belt drifts, adjust the knob slightly; allow the belt to run for a few revolutions.
User questions about DS935 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual DS935 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS935 by SCHEPPACH.
USER MANUAL DS935 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : DS935
Category : Sander