DACP1400 - Polisher DAEWOO - Free user manual and instructions
Find the device manual for free DACP1400 DAEWOO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Rotary Polisher |
| Brand | Daewoo |
| Model | DACP1400 |
| Power Supply | 230 V AC, 50 Hz |
| Power Consumption | 1400 W |
| No-Load Speed | 0 – 3000 RPM |
| Disc Diameter | 180 mm |
| Spindle Thread | M14 |
| Variable Speed Control | Electronic with dial |
| Soft Start | Yes – prevents surface marks |
| Additional Handle | Side handle for two-handed operation |
| Housing Material | High-strength engineering plastic |
| Overload Protection | Thermal cut-out |
| Dimensions (L×W×H) | 480 × 200 × 280 mm |
| Weight | 2.8 kg |
| Power Cable Length | 3.0 m |
| Noise Level | 85 dB(A) (K=3 dB) |
| Vibration Level | 5.5 m/s² (K=1.5 m/s²) |
| Safety Features | Double insulation, lock-off switch |
| Maintenance | Periodic cleaning of air vents and brush replacement |
| Repairability | Replaceable carbon brushes and spindle |
| Included Accessories | Wool pad, foam pad, backing plate, spanner |
| Certifications | CE, RoHS |
| Warranty | 12 months |
Frequently Asked Questions - DACP1400 DAEWOO
What is the proper way to connect the polishing pad to the DACP1400?
First ensure the spindle is clean. Align the pad with the backing plate and press it firmly while turning slightly clockwise until it locks. Double-check that the pad is securely attached before use.
Can I use the DACP1400 for wet sanding?
No, the DACP1400 is designed for dry polishing only. Using water or other liquids can damage the motor and create an electrical hazard.
How do I adjust the speed on the device?
The speed is controlled by the dial on the rear housing. Turn it clockwise to increase speed, counterclockwise to decrease. Always start at a low speed and gradually increase to avoid flinging polish.
What maintenance should I perform regularly?
After each use, unplug the polisher and remove the pad. Clean the backing plate and spindle. Check the carbon brushes every 50 hours of use and replace them when they are worn below 5 mm. Also clean the air vents with a soft brush.
Is the DACP1400 safe for use on car paint?
Yes, when used correctly with the appropriate pad and polish. Use low speed for delicate paint, apply even pressure, and keep the polisher moving to avoid heat buildup. The electronic speed control helps maintain a safe operation.
Why does my polisher overheat and shut off?
This is the thermal protection activating. It usually happens if the air vents are blocked, or the machine is worked too hard for an extended period. Turn off the device, let it cool down for 15-20 minutes, and clear any dust or debris from the vents.
Can I use a smaller disc on the DACP1400?
The polisher is designed for a 180 mm disc. Using a smaller disc is possible but may reduce stability. Ensure the disc is rated for the spindle thread (M14) and does not exceed the maximum rated speed.
What type of polish should I use with this machine?
Use a quality automotive polish or compound. Apply a small amount (about a pea-size) to the pad, spread it over a small area at low speed, then increase speed for buffing. Avoid using abrasive compounds unless the paint is severely oxidized.
How do I replace the carbon brushes?
First unplug the machine. Locate the brush caps at the motor housing sides. Unscrew them, slide out the worn brushes, insert new ones (same size), and re-tighten the caps. Always replace both brushes at the same time.
Is it safe to use an extension cord with the polisher?
Yes, but use a heavy-duty extension cord with a cross-section of at least 2.5 mm² for lengths up to 25 meters. Ensure the cord is rated for outdoor use and the plug remains dry. Never use a damaged cord.
User questions about DACP1400 DAEWOO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Polisher in PDF format for free! Find your manual DACP1400 - DAEWOO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DACP1400 by DAEWOO.
USER MANUAL DACP1400 DAEWOO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAEWOO
Model : DACP1400
Category : Polisher