Bamba Precisioncare Extreme 5in1 - Hair Straightener CECOTEC - Free user manual and instructions

USER MANUAL Bamba Precisioncare Extreme 5in1 CECOTEC

ÍNDICE

1. Safety instructions 09
2. Parts and components 30
3. Before use 38
4. Operation 38
5. Cleaning and maintenance 40
6. Technical specifications 41
7. Disposal of electrical appliances 42
8. Technical support service and warranty 42

SOMMAIRE

1. SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

• Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is grounded.
• This product is for household only. Do not use for commercial or industrial purposes and do not use outdoors.
• Do not reach for an appliance that has fallen into water. Unplug it immediately.
• Do not operate the device near water or in places where there is risk of getting wet. Do not store it where it can be dropped into water.
• Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid, nor expose the electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.

EN

• Except when charging, always unplug this appliance from the electrical outlet immediately after using it.
• Never leave the device unattended while connected to the power supply or while operating.
• Turn off and unplug the device from the power supply before assembling or disassembling attachments.
• Keep the cord away from heated surfaces.
• Never operate the appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it has been dropped into water.
• Do not insert any object into any of the appliance's openings.
• Always store the appliance and cord in a moisture-free area. Do not store it in temperatures exceeding 60 °C.
• Do not operate the device near aerosols of sprays.
• Make sure the cord is disconnected from the groomer stand when storing.

EN

• Do not use this appliance with a damaged or broken cutter unit, as injury may occur. Always make sure blades are aligned properly.
• Use only accessories, components and the charger provided by Cecotec.
• Do not use an extension cord or a voltage converter with this appliance.
• Do not wrap the cord around the appliance.
• This appliance cannot be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge. Supervise young children to make sure that they do not play with the appliance.

FR

1. INSTRUCTIONS DE SÉCURITÉ

ES

1. Shaver head
2. On/off button
3. LED power indicator
4. Body groomer
5. Nose and ear trimmer
6. Foil shaver trimmer
7. Oil bottle
8. Charger
9. Cleaning brush
10. Beard guide comb
11. Storage case

FR

• Take the product out of the box.
- Remove all packaging materials. Keep the original box.
• Make sure all the components are included and in good conditions, otherwise, contact immediately the official Technical Support Service of Cecotec.
- Before the first use, charge the device for 2 hours for optimum operation.

4. OPERATION

1. Select the attachment that best fits your personal needs.
2. Assemble the desired attachment to the top part of the device's body.
   • To remove the shaver head or any other attachment you have assembled, hold the trimmer body with one hand and slightly turn it anticlockwise with the other hand.
3. To assemble a different one, insert the attachment into the trimmer's slot and then turn it slightly clockwise to fix it into place.
4. To assemble the beard guide comb attachment, introduce the shaver head inside the guide comb and lock into place the attachment's fixing tab.
5. The guide comb includes a length-adjustment knob. Adjust it from 0.5 mm to 10 mm and adapt it to your desired haircut.
6. To remove the comb attachment, pull the back part off the product until the fixing tab is released and then slide the comb off the blade.
7. Slide the switch upwards to turn the device on and slide it downwards to turn it off.

Note: The length of the cut may vary depending on the trimming angle.

EN

Begin with the comb attachment set at a longer cutting length and then use progressively shorter cutting lengths as you cut hair.

TIPS

Ears:

• When using the trimmer for cutting ear hair, do not insert it more than 6 mm.
• When switched on, gently move the trimmer in and out of the ear canal.

Nose:

• When using the trimmer for cutting nose hair, do not insert it more than 6 mm.
• When switched on, gently move the trimmer in and out of the nose.

Nape/neck:

• Using a hand-held mirror is necessary for self-trimming.
- Lift hair off the neck and place the index finger to cover and protect hairs that are not going to be cut.
- Carefully place the blades on the neck's surface and slowly move the groomer in an upward direction until it is stopped by the index finger.

Shaving:

• Switch the trimmer on.
• Move it performing straight movements close to the surface you are going to shave. Use it when hair is shorter than 1 mm. Do not make straight movements, move it in circles.

Wet shaving:

EN

The device can also be used as a face shaver when skin is wet.

• Apply some water to your skin.
• Apply shaving foam or shaving gel to your skin
- Rinse the shaving unit under the tap to ensure that the shaving unit glides smoothly over your skin.
- Move the shaving head in circular movements over your skin.
• Dry your face and thoroughly clean the shaver after use.

Trimming with the comb attachment

- The precision trimming comb allows trimming hair to different lengths.

Note: When you trim for the first time, start at the highest length setting to familiarize yourself with the product and then adjust it to the desired length.

• Always trim in the direction of the teeth of the precision trimming comb, making sure the flat part of the comb is in full contact with the skin for an even trimming result.

Body groomer

The device can be also used as a body groomer, for trimming hair from the back, shoulders, chest, abs, underarms, arms and legs.

It counts on a unique-design surface that protects your skin from being scraped.

5. CLEANING AND MAINTENANCE

• Turn off and disconnect the device from the mains supply before cleaning, maintaining it or assembling or disassembling any of its parts.
• Do not use compressed air, abrasive scouring pads, powders or cleaners to clean the product.
• Do not immerse the appliance's body in water or any other liquid, or place it under running water.
  • To clean the attachments, first remove it, brush it with the cleaning brush and blow out hair clippings from the attachment

EN

and the body.

• Attachments are waterproof; therefore, they can be washed with water if necessary. Dry them thoroughly before storing or using them again.
• Clean the trimmer and the attachments after each use with the cleaning brush. Remove the attachment and rinse it under warm running water. Do not use hot water.
  • To clean the shaver:

- Rinse the shaving attachment under running water. Use the cleaning brush at the same time if necessary.

- Carefully shake off excess water and let the shaving unit dry. Do not dry it with a towel or tissue, as this may damage the shaving heads.

Warning: Do not rinse the shaver attachment as this is permanently lubricated

Oiling blades

• Rinsing attachments under water (above) requires lubricating the cutting blades once per month. Using only light-grade oils (e.g. sewing machine oil), simply spread 1-2 drops lightly over cutters with the fingertip. Wipe away all excess.
• Use only light-grade oils as these will not evaporate nor slow down the speed of the cutting blades.
• Do not use hair oil, grease, or any oil mixed with kerosene nor solvent as these too will evaporate.

6. TECHNICAL SPECIFICATIONS

Model: PrecisionCare Extreme 5in1

Product name: 04229

100-240 V\~, 50/60 Hz

Output: 5 V DC 1000 mA

IP X5

Made in China | Designed in Spain

EN

7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), specifies that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.

The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose of the appliance correctly. If the product has a built-in battery or uses batteries, they should be removed from the appliance and disposed of appropriately.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

8. TECHNICAL SUPPORT SERVICE AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual.

The warranty will not cover the following situations:

• The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault attributable to the customer.
  • The product has been disassembled, modified, or repaired by

EN

persons, not authorised by the official Technical Support Service of Cecotec.

• Faults deriving from the normal wear and tear of its parts, due to use.
• The warranty service covers every manufacturing defects of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at [phone].

FR

3. AVANT UTILISATION

Lubrificar as lâminas

8. GWARANCJA I OBSŁUGA KLIENTA