KI-215-SMA-II - Subwoofer KLIPSCH - Free user manual and instructions
Find the device manual for free KI-215-SMA-II KLIPSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Brand | Klipsch |
| Model | KI-215-SMA-II |
| Driver Configuration | Dual 15-inch woofers |
| Frequency Response | 32 Hz - 120 Hz |
| Amplifier Power | 1000 W peak (500 W RMS) |
| Sensitivity | 98 dB @ 1W/1m |
| Impedance | 8 ohms |
| Inputs | Balanced XLR / 1/4" combo jacks |
| Outputs | Balanced XLR loop-through |
| Enclosure Material | MDF (medium-density fiberboard) |
| Finish | Black textured laminate |
| Dimensions (H x W x D) | 24.5" x 36" x 24" (622 x 914 x 610 mm) |
| Weight | 120 lbs (54.4 kg) |
| Power Supply | AC 120V / 240V switchable |
| Controls | Volume, crossover frequency, phase switch |
| Indicators | Power LED, clip LED |
| Protection | Thermal and over-excursion protection |
| Cooling | Front and rear amplifier heat sinks |
| Enclosure Tuning | Vented bass-reflex design |
| Mounting | Optional pole mount cup; rubber feet |
| Included Accessories | Protective grille |
| Maintenance | Wipe with a soft, dry cloth |
| Safety Compliance | CE, UL listed |
Frequently Asked Questions - KI-215-SMA-II KLIPSCH
What is the power rating of the KI-215-SMA-II subwoofer?
The KI-215-SMA-II has a 1000 W peak amplifier (500 W RMS). This provides ample headroom for high-output applications while maintaining clear, distortion-free bass.
What type of cables should I use to connect the subwoofer?
Use balanced XLR cables or 1/4-inch TRS cables for best audio quality. The subwoofer's combo jacks accept both XLR and 1/4-inch connectors. For longer cable runs, balanced connections are recommended to minimize noise.
How do I set the crossover frequency?
Set the crossover frequency to match your main speakers. If you have small satellite speakers, choose a higher crossover (around 80-100 Hz). For larger speakers that can handle more bass, select a lower crossover (around 60 Hz).
What is the purpose of the phase switch?
The phase switch (0/180 degrees) aligns the subwoofer's output with your main speakers to avoid phase cancellation. Adjust it to the position that gives you the fullest bass response at the listening position.
Can I use this subwoofer outdoors?
While the KI-215-SMA-II is built for professional installs, it is not weatherproof. Do not expose it to rain, moisture, or direct sunlight. Use it indoors or in covered outdoor areas.
How should I clean the subwoofer?
Clean the enclosure with a soft, dry cloth. Do not use water, solvents, or cleaning sprays as they can damage the finish and drivers. Vacuum the grille gently to remove dust.
Where is the best placement for optimal bass response?
Place the subwoofer in a corner or against a wall to reinforce bass output. Avoid placing it in the middle of the room. If possible, keep it within 10-15 feet of the main listening position to minimize timing issues.
Does the KI-215-SMA-II come with a grille?
Yes, a protective grille is included. It helps shield the drivers from accidental impact and debris while allowing unobstructed sound passage.
How can I adjust the volume to match my system?
Start with the volume control and crossover at their minimum settings. Play familiar music and slowly increase the subwoofer volume until the bass blends seamlessly with your speakers. Avoid excessive gain to prevent distortion.
What warranty is provided for the KI-215-SMA-II?
Klipsch offers a 5-year limited warranty for commercial products like the KI-215-SMA-II. It covers defects in materials and workmanship under normal use. Check the official warranty card for full terms.
User questions about KI-215-SMA-II KLIPSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual KI-215-SMA-II - KLIPSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KI-215-SMA-II by KLIPSCH.