Reference RW-5802 II - Subwoofer KLIPSCH - Free user manual and instructions
Find the device manual for free Reference RW-5802 II KLIPSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-wall powered subwoofer |
| Brand | Klipsch |
| Model | Reference RW-5802 II |
| Driver Size | 10 inches (25.4 cm) Cerametallic cone |
| Amplifier Power | 275 watts RMS / 550 watts peak |
| Frequency Response | 27 Hz – 120 Hz ± 3 dB |
| Maximum Output | 112 dB |
| Impedance | 8 ohms (line level input) |
| Dimensions (H x W x D) | 15.5 x 15.5 x 8.5 inches (394 x 394 x 216 mm) |
| Cutout Dimensions | 13.5 x 13.5 inches (343 x 343 mm) |
| Weight | 32 lbs (14.5 kg) |
| Enclosure Material | MDF with black textured finish |
| Mounting Type | In-wall (bracket and screws included) |
| Inputs | Line level RCA, speaker level (through binding posts) |
| Controls | Volume, low pass crossover (40-120 Hz), phase switch (0/180°), auto on/off |
| Protection | Overheat, overcurrent, DC offset |
| Warranty | 5 years (parts and labor) |
| Included Accessories | Owner's manual, grille, mounting template, screws |
Frequently Asked Questions - Reference RW-5802 II KLIPSCH
What is the recommended amplifier power for this subwoofer?
The RW-5802 II has a built-in 275-watt RMS amplifier, so no external amplifier is required. It is a powered subwoofer.
Can I use this subwoofer in a home theater system?
Yes, it is designed for home theater use. Connect via the LFE (RCA) input from your receiver or amplifier.
What are the installation steps for in-wall mounting?
1. Choose a location between studs. 2. Cut a hole using the provided template. 3. Run speaker wire. 4. Connect wire to the subwoofer. 5. Insert and secure with screws. 6. Attach grille.
How do I adjust the crossover frequency?
Use the low pass crossover knob on the back panel. Set it to match your main speakers (typically 80 Hz for THX systems).
What should I do if the subwoofer does not turn on?
Check the power cord and outlet. Ensure the auto-on switch is set correctly. If using a receiver, verify it is sending a signal. If still off, try resetting by unplugging for 30 seconds.
Can I paint the grille to match my wall?
Yes, the grille is paintable. Use thin, water-based paint and apply light coats to avoid clogging the perforations.
What is the phase switch for?
The phase switch (0 or 180 degrees) helps align the subwoofer’s output with your main speakers for smoother bass integration. Listen and choose the setting that sounds louder and tighter.
How deep does the wall need to be to accommodate this subwoofer?
The mounting depth is 6.75 inches (171 mm). Ensure your wall cavity has at least that depth plus clearance for the speaker wire.
Is this subwoofer compatible with 110V and 220V power?
The amplifier is factory set for 110-120V. Do not attempt to use with 220V without a step-down transformer, as it may damage the unit.
What type of speaker wire should I use?
Standard 16-14 AWG speaker wire is recommended. Ensure proper polarity (positive to positive, negative to negative).
User questions about Reference RW-5802 II KLIPSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Reference RW-5802 II - KLIPSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reference RW-5802 II by KLIPSCH.
USER MANUAL Reference RW-5802 II KLIPSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KLIPSCH
Model : Reference RW-5802 II
Category : Subwoofer