Reference RW-10 - Subwoofer KLIPSCH - Free user manual and instructions
Find the device manual for free Reference RW-10 KLIPSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Brand | Klipsch |
| Model | Reference RW-10 |
| Driver Size | 10 inches (25.4 cm) |
| Amplifier Power (RMS) | 200 watts |
| Peak Power | 400 watts |
| Frequency Response | 28 Hz - 120 Hz ±3 dB |
| Enclosure Type | Bass reflex (ported) |
| Dimensions (H x W x D) | 16.5 x 13 x 19 inches (419 x 330 x 483 mm) |
| Weight | 37 lbs (16.8 kg) |
| Inputs | LFE (RCA), Line level RCA stereo |
| Controls | Volume, Low-pass crossover (40-120 Hz), Phase switch (0/180°) |
| Auto Power On/Off | Yes, signal sensing |
| Protection Circuit | Overload, thermal |
| Finish | Black wood grain vinyl |
| Warranty | 2 years (parts and labor) |
| Maintenance | Wipe with a dry, lint-free cloth; do not use liquids or aerosols |
| Safety Precautions | Do not expose to rain or moisture; unplug during thunderstorms or long periods of non-use |
| Spare Parts / Repairability | Contact authorized service center for repairs; no user-serviceable parts inside |
Frequently Asked Questions - Reference RW-10 KLIPSCH
What is the best placement for the RW-10 subwoofer?
Place the subwoofer in a corner or along a wall for maximum bass output. Experiment with the phase switch (0° or 180°) to integrate with your main speakers. Avoid placing it too close to walls if you hear boomy sound.
How do I connect the RW-10 to my AV receiver?
Use a single RCA cable from the subwoofer output (LFE) on your receiver to the LFE input on the subwoofer. Alternatively, if your receiver has stereo pre-outs, you can use the line level inputs. Set the crossover on your receiver to 80 Hz (or as recommended).
The subwoofer does not turn on automatically. What should I check?
Ensure the power cord is securely connected and the wall outlet is working. Check that the auto power feature is enabled (some models have a switch). If the subwoofer still doesn't turn on, try toggling the power switch off and on. If the issue persists, contact Klipsch support.
Why is there a humming noise coming from the subwoofer?
Humming is often caused by a ground loop. Try connecting all components to the same power strip. Use a ground loop isolator on the RCA cable. Ensure the signal cable is not running parallel to power cables.
What does the phase switch do and how do I set it?
The phase switch (0° or 180°) adjusts the timing of the subwoofer's output relative to your main speakers. Set it to 0° initially. Play a bass-heavy track and switch to 180°; use the setting that produces the loudest and most seamless bass at your listening position.
How do I set the low-pass crossover on the subwoofer?
If using the LFE input on your receiver, set the crossover on the subwoofer to the highest position (around 120 Hz) and let the receiver handle the crossover. If using line level inputs, set the crossover knob to match your main speakers' capability, typically 80 Hz.
The subwoofer suddenly stopped working. What could be the cause?
Check if the subwoofer has entered protection mode due to overheating or a short circuit. Turn it off, wait 10 minutes, and turn it back on. Also verify the power cord and signal cable. If the problem persists, contact Klipsch support for repair.
Can I wall mount the RW-10 subwoofer?
No, the RW-10 is designed for floor placement. Wall mounting is not supported and could damage the unit or pose a safety hazard.
What type of audio content is best for the RW-10?
The RW-10 excels with movies and music that have deep bass content. It is a versatile subwoofer suitable for home theater and stereo music systems.
How do I clean the subwoofer?
Disconnect the power cord. Use a soft, dry cloth to wipe the cabinet and grille. Do not use water, cleaning solvents, or abrasive materials. Avoid getting moisture into the ports or electronics.
User questions about Reference RW-10 KLIPSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Reference RW-10 - KLIPSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reference RW-10 by KLIPSCH.
USER MANUAL Reference RW-10 KLIPSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KLIPSCH
Model : Reference RW-10
Category : Subwoofer