Icon XW-500d - Subwoofer KLIPSCH - Free user manual and instructions
Find the device manual for free Icon XW-500d KLIPSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Powered Subwoofer |
| Dimensions (H x W x D) | 16.5 x 15.25 x 17.75 inches (419 x 387 x 451 mm) |
| Weight | 31.5 lbs (14.3 kg) |
| Power Output | 500 watts RMS (1000 watts peak) |
| Driver Size | 12-inch front-firing |
| Frequency Response | 20 Hz – 120 Hz ± 3 dB |
| Amplifier Type | Class D |
| Inputs | Line-level (RCA), LFE (RCA) |
| Volume Control | Continuously variable |
| Phase Control | 0° or 180° switch |
| Auto Power On/Off | Yes |
| Crossover Frequency | 40 Hz – 120 Hz continuously variable (and bypass) |
| Power Requirements | 120 V / 60 Hz (or 230 V / 50 Hz selectable) |
| Enclosure Type | Bass-reflex (ported) |
| Cabinet Material | MDF with black wood grain vinyl finish |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety Precautions | Do not expose to liquids. Keep away from heat sources. |
| Available Spare Parts | Contact Klipsch customer service for driver or amplifier modules. |
| Warranty | 2 years limited (subject to region) |
Frequently Asked Questions - Icon XW-500d KLIPSCH
How do I connect the XW-500d subwoofer to my receiver?
Use an RCA cable to connect the LFE output from your receiver to the LFE input on the subwoofer. For stereo connections, use the left/right line-level inputs.
Where is the best place to position the subwoofer?
Place the subwoofer in a corner or along a wall for better bass response. Avoid blocking the front port. Experiment with placement for optimal sound.
How do I set the crossover frequency?
Set the crossover dial to match your main speakers' low-frequency capability, typically around 80 Hz. If your receiver manages bass, set the subwoofer crossover to bypass.
What does the phase switch do?
The phase switch (0° or 180°) adjusts the subwoofer's timing relative to your main speakers. Choose the setting that produces the fullest bass at your listening position.
The subwoofer does not power on automatically. What can I do?
Check that the power cord is plugged in and the rear power switch is on. Ensure the auto power feature is enabled. If using LFE, signal must be present to trigger auto-on.
Why is the subwoofer producing a humming noise?
Hum is often caused by a ground loop. Ensure all audio components share the same power outlet. Try a ground loop isolator or lift the ground with a cheater plug (if safe).
How do I properly clean the subwoofer?
Unplug the subwoofer. Wipe the cabinet with a soft, dry cloth. Do not use liquid cleaners or solvents. Gently dust the driver with a soft brush.
Can I use the subwoofer with a computer or 2.1 system?
Yes, connect the subwoofer to the sub out of a computer sound card or 2.1 system using an RCA cable. Adjust volume and crossover as needed.
What is the recommended maintenance schedule?
Periodically check cables and connections. Keep the subwoofer in a well-ventilated area. No regular maintenance is required beyond dusting.
How long does the warranty last and what does it cover?
Klipsch offers a 2-year limited warranty covering defects in materials and workmanship. Proof of purchase is required. Contact customer support for claims.
User questions about Icon XW-500d KLIPSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Icon XW-500d - KLIPSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Icon XW-500d by KLIPSCH.
USER MANUAL Icon XW-500d KLIPSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KLIPSCH
Model : Icon XW-500d
Category : Subwoofer