HR 2603 - Shaver CLATRONIC - Free user manual and instructions

USER MANUAL HR 2603 CLATRONIC

Rasoio 2603 · Men's razor HR 2603

Máquina de barbear para homens 2603 • Maszynka do golenia dla是我的czyzn

General safety instructions

GB

• Before commissioning this device please read the instruction manual carefully.
• Please keep these instructions, the guaranty certificate, the sales receipt and, if possible, the carton with the inner packaging!
• The device is intended exclusively for private and not for commercial use!
• Always remove the plug from the socket whenever the device is not in use, when attaching accessory parts, cleaning the device or whenever a disturbance occurs. Switch off the device beforehand. Pull on the plug, not on the cable.
• In order to protect children from the dangers of electrical appliances, never leave them unsupervised with the device. Consequently, when selecting the location for your device, do so in such a way that children do not have access to the device. Take care to ensure that the cable does not hang down.
• Test the device and the cable regularly for damage. If there is damage of any kind, the device should not be used.
• Do not repair the device yourself, but rather consult an authorised expert.
• For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similar qualified person.
• Keep the device and the cable away from heat, direct sunlight, moisture, sharp edges and suchlike.
• Never use the device unsupervised! Switch off the device whenever you are not using it, even if this is only for a moment.
• Use only original accessories.
• Do not use the device outdoors*.
• Under no circumstances must the device be placed in water or other liquid, or come into contact with such). Do not use the device with wet or moist hands.
• Should the device become moist or wet, remove the mains plug from the socket immediately*). Do not reach into the water.
• Use the device only for the intended purpose.

Instructions for charging the device

Please lay the razor on a cool, dry surface when charging. Insert the jack of the mains cable in the mains socket on the razor and insert the plug in a duly installed 230V/50Hz socket. The green LED shows that the razor is charging and it remains lit until the razor is disconnected from the wall socket. Leave the shaver to charge for at least 16 hours before using for the first time. It takes from 14 to 16 hours for a flat battery to be charged.

GB

Control element overview

1 Battery/AC adapter;
2 2 level shaving system;
3 Hair cutter;
4 LED display;
5 Removable double shaving head for the cleaning of the blades;
6 Skid-proof handle area;
7 Travel case.

Use

Take the protection cap off the device before use. Shift the on/off switch up (towards the shearing head) to switch on the device. Use the trimmer on the back of the device to cut long hair. Push the release button upwards until the trimmer comes off. Run the shearing blade across the surface to be cut with the blade lying flat against it to remove the remaining hair.

After use switch the device off with the on/off switch and push the release button in until the trimmer fits back into place.

Should the incorporated accumulator be flat, the razor can be used anyway by connecting the mains cable.

Cleaning and care

Switch the device off with the on/off switch and pull out the plug. Press the release button to remove the blade. Clean the razor with the supplied cleaning brush.

Attention: do not touch the blades of the razor with your fingers! In order to remove hair in the gaps of the blade, use the supplied brush. Put the shearing blade back on after cleaning.

This appliance conforms with the CE directives for radio interference suppression and low-voltage safety and has been built to meet current safety requirements.

Subject to technical changes without prior notice!

Warranty

We undertake to guarantee the appliance sold by our company for 24 months as of the date of purchase (cash receipt).

Within the guarantee period we rectify faults to the machine free of charge which result from material or manufacturing faults, either by repairing the machine or, or our discretion, by replacement. Any such repair or replacement associated with the guarantee shall not cause the guarantee period to be extended, nor be deemed to be the start of a new guarantee period!

Proof for the warranty is provided by the purchase document. The replacement and

repair will not be performed free of charge without this proof of purchase.

Should the warranty be valid, please consign the complete appliance in its original packing together with the cash receipt to your local dealer.

Defects to the accessories do not entitle to the change of the appliance. These will be replaced free of charge. In this case do not send back the appliance. Just order the faulty accessory! Broken glass parts are replaced at the expense of the owner!

Faults to consumption accessories or wearing parts (e.g. engine graphite, saw blades, kneading hooks, drive belts etc), as well as cleaning, maintenance or the replacement of wearing parts, do not fall under the guarantee and are therefore subject to a charge!

The warranty is terminated in case of handling on the part of Third parties.

After the warranty

Once the warranty has expired, repairs can be carried out by specialized technicians or repair services against the payment of the service.

PL