DS-K1106M - Access Control System Hikvision - Free user manual and instructions
Find the device manual for free DS-K1106M Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control System |
| Brand | Hikvision |
| Model | DS-K1106M |
| Access Methods | 13.56 MHz RFID card and PIN code |
| Keypad | 12-key illuminated keypad |
| Communication Protocol | Wiegand 26/34-bit output |
| Input Voltage | 12 VDC |
| Current Draw | ≤ 100 mA (max) |
| Dimensions (W × H × D) | 115 mm × 80 mm × 20 mm |
| Net Weight | 200 g |
| Enclosure Material | ABS plastic with scratch-resistant coating |
| Protection Rating | IP65 (weather-resistant for outdoor use) |
| Operating Temperature | -20 °C to 60 °C |
| Installation | Surface-mount on wall or glass door |
| Indicators | Green and red LED status lights |
| Tamper Protection | Built-in tamper alarm switch |
| Maintenance | Wipe with a soft dry cloth; avoid solvents |
| Spare Parts Availability | Keypad and antenna assembly replaceable |
| Compatibility | Works with Hikvision access controllers |
| General Information | Designed for secure door entry management |
Frequently Asked Questions - DS-K1106M Hikvision
What is the Hikvision DS-K1106M used for?
The Hikvision DS-K1106M is an access control system designed to manage and secure door entry, supporting card and PIN authentication.
How do I connect the DS-K1106M to an access controller?
It uses a Wiegand interface (26/34-bit). Connect the reader's Wiegand lines to the controller's corresponding inputs, and power it with 12 VDC.
Can the DS-K1106M be used outdoors?
Yes, it has an IP65 protection rating, making it weather-resistant and suitable for outdoor installations.
How do I reset the DS-K1106M to factory defaults?
To reset, press and hold the tamper switch while cycling power. Release the switch after the LEDs flash rapidly, then wait for the device to restart.
What types of cards are supported?
The reader supports 13.56 MHz RFID cards, specifically Mifare type cards (e.g., Mifare Classic, Mifare Plus).
Does the DS-K1106M have a keypad for PIN entry?
Yes, it includes a 12-key backlit keypad that allows PIN entry for dual authentication (card + PIN) or standalone PIN mode.
How do I enroll a new card into the system?
Card enrollment is typically performed via the access controller or management software. Enter the controller's programming mode, scan the card, and assign user permissions.
What voltage is required to operate the DS-K1106M?
The device operates on 12 VDC with a maximum current consumption of 100 mA, making it compatible with standard access control power supplies.
What should I do if the LED lights are not working?
First, check the power supply and ensure the input voltage is 12 VDC. Next, inspect the wiring for loose connections. If the issue persists, the LED board may need replacement.
Is the device compatible with third-party controllers?
Yes, because it uses the industry-standard Wiegand protocol, it can work with most access controllers that support Wiegand 26-bit or 34-bit input.
User questions about DS-K1106M Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual DS-K1106M - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K1106M by Hikvision.
USER MANUAL DS-K1106M Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-K1106M
Category : Access Control System