DS-K1T607PMFW - Access Control System Hikvision - Free user manual and instructions
Find the device manual for free DS-K1T607PMFW Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control Terminal |
| Display | 7-inch capacitive touchscreen, 1024 x 600 resolution |
| Recognition Method | Face recognition, fingerprint, card, and password |
| User Capacity | 50,000 users |
| Face Capacity | 50,000 face templates |
| Card Capacity | 50,000 cards |
| Fingerprint Capacity | 50,000 fingerprints |
| Communication Interfaces | TCP/IP, RS-485, Wiegand, USB 2.0 |
| Network Protocols | IPv4, IPv6, HTTP, HTTPS, TCP/IP |
| Power Supply | DC 12V, 2A |
| Power Consumption | ≤ 15 W |
| Operating Temperature | -10 °C to 55 °C |
| Operating Humidity | 10% to 90% RH, non-condensing |
| Dimensions (W x H x D) | 209.5 x 105 x 24 mm |
| Weight | 0.8 kg |
| Mounting | Wall-mounted via included bracket |
| Ingress Protection | IP65 |
| Authentication Modes | Card, password, fingerprint, face, and combinations |
| Alarm Functions | Tamper alarm, face anti-spoofing, network supervision |
| Tamper Protection | Tamper switch for anti-removal |
| Software Compatibility | iVMS-4200, Hik-Connect, ISAPI |
| Included Accessories | Mounting bracket, screws, quick start guide |
| Maintenance and Cleaning | Wipe screen and sensor with soft dry cloth; avoid abrasive cleaners |
| Repairability and Spare Parts | Power supply, bracket, and display panel available via authorized service centers |
Frequently Asked Questions - DS-K1T607PMFW Hikvision
How do I reset the device to factory settings?
Press and hold the reset button on the device for 5 seconds, or use the admin menu in the settings. A factory reset will restore default network settings and erase all user data.
How do I connect the terminal to the network?
Connect the Ethernet cable to the RJ-45 port on the back of the device and ensure the terminal is powered on. Use the device menu to configure a static IP address or enable DHCP, then test the connection via ping.
How do I add a new user?
Access the device's local menu as an administrator, go to User Management, and select Add User. Choose the authentication method (face, card, fingerprint, or password) and follow the on-screen instructions to enroll credentials.
What should I do if face recognition fails?
Ensure the user is within 0.3 m to 1.5 m from the camera and the face is fully visible without glasses or masks. Check the recognition threshold in settings and improve lighting conditions. Re-enroll the face if necessary.
Can the device be used outdoors?
Yes, the device has an IP65 rating, meaning it is protected against dust and low-pressure water jets. However, avoid direct sunlight and extreme weather by installing it under an eave or canopy.
How do I clean and maintain the device?
Use a soft, lint-free cloth to wipe the screen and camera lens. Do not use alcohol or abrasive chemicals. Check all cables and connections regularly to ensure stable operation.
Does the device support remote management?
Yes, it supports iVMS-4200, Hik-Connect, and ISAPI protocols, allowing remote configuration, monitoring, and user management over the network.
What is the maximum number of users?
The device supports up to 50,000 users with a combined capacity of 50,000 face templates, 50,000 cards, and 50,000 fingerprints. This capacity is sufficient for large organizations.
How do I update the firmware?
Download the latest firmware from the Hikvision official website. Use the remote upgrade function in iVMS-4200 or the local menu to upload the firmware file. Ensure uninterrupted power during the update.
How do I mount the device on the wall?
Use the included mounting bracket as a template to mark screw holes. Drill holes, insert anchors, and secure the bracket with screws. Attach the device, then adjust the viewing angle for optimal face capture.
User questions about DS-K1T607PMFW Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual DS-K1T607PMFW - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K1T607PMFW by Hikvision.
USER MANUAL DS-K1T607PMFW Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-K1T607PMFW
Category : Access Control System