DS-K1108EK - Access Control System Hikvision - Free user manual and instructions
Find the device manual for free DS-K1108EK Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control Keypad Reader |
| Brand | Hikvision |
| Model | DS-K1108EK |
| Category | Access Control System |
| Dimensions (L × W × H) | 130 mm × 80 mm × 25 mm |
| Weight | 0.2 kg |
| Power Supply | 12V DC |
| Main Functions | Card and PIN authentication, standalone access control, Wiegand output |
| Security Features | Tamper alarm, door contact input |
| Maintenance | Wipe with a soft dry cloth |
| Spare Parts & Repairability | Integrated unit, no user-serviceable parts |
| General Information | Supports 1000 users and 1000 event logs |
Frequently Asked Questions - DS-K1108EK Hikvision
What is the Hikvision DS-K1108EK?
The DS-K1108EK is an access control keypad reader that combines a 13.56 MHz card reader and a PIN keypad for secure entry.
How many users can be stored on the DS-K1108EK?
It can store up to 1000 users and 1000 event logs, making it suitable for small to medium installations.
Which credential types are supported?
The device supports 13.56 MHz Mifare cards, PIN codes, and card + PIN combination for high security.
What power supply is required?
The DS-K1108EK requires a 12V DC power supply with a typical consumption of 3W.
Can it operate standalone or with a controller?
It can operate in standalone mode to control a lock directly, or as a reader connected to an access control panel via Wiegand interface.
How do I add a new user?
Enter programming mode using the master PIN, then follow the manual to add a card or PIN using the built-in keypad.
What is the Wiegand output on this device?
It provides Wiegand 26-bit and Wiegand 34-bit output formats for integration with third-party controllers.
How do I clean the DS-K1108EK?
Use a soft dry cloth to wipe the keypad and reader. Avoid water, solvents, and abrasive cleaners.
What security features are included?
It includes a tamper alarm and a door contact input to detect intrusion or doors left open.
How can I reset the device to factory defaults?
Press and hold the RST button for 5 seconds. This will clear all user data and restore default settings.
User questions about DS-K1108EK Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual DS-K1108EK - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K1108EK by Hikvision.
USER MANUAL DS-K1108EK Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-K1108EK
Category : Access Control System