DS-K1108E - Access Control System Hikvision - Free user manual and instructions
Find the device manual for free DS-K1108E Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access control reader with keypad |
| Brand | Hikvision |
| Model | DS-K1108E |
| Card Compatibility | Mifare 1K (13.56 MHz) and EM 125 kHz cards |
| Read Range | 2 to 5 cm depending on card type |
| Keypad | 12 alphanumeric keys with backlight |
| Output Interface | Wiegand 26/34 |
| Power Supply | 12V DC |
| Current Consumption | ≤ 150 mA |
| Dimensions (W × H × D) | 86 × 86 × 20 mm |
| Weight | 0.20 kg |
| Operating Temperature | -20 °C to +65 °C |
| Protection Rating | IP65 (dust-tight and resistant to water jets) |
| Mounting | Wall-mounted with screws (mounting kit included) |
| LED Indicators | Red/green status LED for operation feedback |
| Buzzer | Built-in buzzer for key presses and card reads |
| Security Features | Supports multiple card formats and tamper-resistant design |
| Maintenance and Cleaning | Clean with a soft dry cloth; keep away from water and harsh solvents |
| Spare Parts and Repairability | No user-replaceable parts; contact certified Hikvision service for repairs |
| General Information | Compatible with Hikvision access controllers; suitable for indoor and outdoor use |
Frequently Asked Questions - DS-K1108E Hikvision
How do I connect the DS-K1108E to an access controller?
Connect the device's Wiegand output wires to the corresponding Wiegand input pins on the access controller. Typically, the wires are labeled D0 and D1. Ensure power is supplied at 12V DC. Refer to the controller's manual for exact wiring and configuration.
Which card types are supported by the DS-K1108E?
The reader supports both Mifare 1K (13.56 MHz) and EM (125 kHz) cards. This allows compatibility with most common proximity and smart card systems.
Can the reader be used outdoors?
Yes, the DS-K1108E has an IP65 protection rating, meaning it is dust-tight and protected against water jets. It can be safely installed in outdoor environments.
How do I use the keypad for PIN entry?
The keypad can be used independently to enter a PIN code if the access controller is configured for PIN verification. Press the keys, and the built-in buzzer will confirm each keystroke. The PIN length is set by the controller.
What is the power requirement for this device?
The reader requires a regulated 12V DC power supply with a current capacity of at least 150 mA. Use a dedicated power adapter or the access controller's power output if available.
How should I clean and maintain the reader?
Use a soft, dry cloth to wipe the surface. Avoid water, volatile solvents, or abrasive cleaners, as they may damage the keypad and housing. For outdoor units, periodically check the housing for moisture or dust accumulation.
Is the DS-K1108E a standalone access controller?
No, the DS-K1108E is a reader device designed to be used with an external access control panel. It transmits card and PIN data via the Wiegand interface to the controller for decision-making.
What do the LED indicators and buzzer mean?
The green LED typically indicates an accepted card or valid PIN, while the red LED indicates a denied or error condition. The buzzer provides audible confirmation for key presses and card reads; the pattern is configurable by the controller.
How do I mount the DS-K1108E on a wall?
The mounting kit includes screws and anchors. Position the bracket against the wall, mark the screw holes, drill pilot holes if needed, and firmly secure the bracket. Attach the reader to the bracket and ensure it snaps into place.
What should I do if the reader fails to detect cards?
First, verify that the cards are compatible and in good condition. Check the wiring connections and ensure the power supply delivers 12V DC. Clean the reading surface and remove any metal objects or interference nearby. If the issue persists, contact a certified Hikvision technician for repair.
User questions about DS-K1108E Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual DS-K1108E - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K1108E by Hikvision.
USER MANUAL DS-K1108E Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-K1108E
Category : Access Control System