CLW-LSWEX-2GD - Switch Crestron - Free user manual and instructions
Find the device manual for free CLW-LSWEX-2GD Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smart Wall Switch |
| Brand | Crestron |
| Model | CLW-LSWEX-2GD |
| Color | White |
| Number of Buttons | 2 |
| Wireless Protocol | Crestron InfiNET EX |
| RF Frequency | 2.4 GHz |
| Input Voltage | 120 VAC, 60 Hz |
| Maximum Incandescent Load | 300 W |
| Maximum LED Load | 150 W |
| Dimming Type | Leading-edge or trailing-edge |
| Compatibility | Crestron control systems |
| Mounting | Standard 1-gang wallbox |
| Dimensions (H x W x D) | 4.12 in x 1.79 in x 1.55 in |
| Weight | 3.2 oz (91 g) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity Rating | Up to 85% RH (non-condensing) |
| Enclosure Material | Flame-retardant plastic |
| Safety Certifications | UL Listed, CE marked |
| Special Features | Low-profile design, LED status indicator |
| Maintenance | Clean with a soft dry cloth; avoid solvents |
| Repair | No user-serviceable parts; contact qualified technician |
Frequently Asked Questions - CLW-LSWEX-2GD Crestron
How do I install the CLW-LSWEX-2GD switch?
Turn off power at the circuit breaker, then connect the line and load wires to the switch terminals. Push the device into a standard 1-gang wallbox and secure it with the included screws. Restore power and pair the switch with your Crestron system.
How does the switch pair with a Crestron control system?
Use the Crestron Toolbox software to identify the switch and add it to the wireless network. Press the pairing button on the switch while the system is in discovery mode, then wait for the confirmation LED.
Does the CLW-LSWEX-2GD require a neutral wire?
Yes, a neutral wire is required for proper operation of the wireless circuitry. If your installation lacks a neutral, consult an electrician to add one.
Can I use this switch with dimmable LED bulbs?
Yes, the switch supports leading-edge and trailing-edge dimming, but the LED driver must be dimmable. Check the bulb's packaging for compatibility.
What is the maximum load for incandescent bulbs?
The maximum incandescent load is 300 watts at 120 VAC. Do not exceed this rating to prevent overheating.
How do I reset the CLW-LSWEX-2GD to factory defaults?
Press and hold the top button for 10 seconds until the LED flashes rapidly. This clears all wireless programming and returns the switch to its default state.
Is this switch compatible with three-way wiring configurations?
Yes, it can be used in a three-way circuit with a compatible companion switch. Programming via the Crestron system assigns each button for remote control.
Can I control the switch remotely with a smartphone?
No, the switch requires a Crestron control system with a gateway or processor to enable remote access through the Crestron App. It is not a standalone Wi-Fi device.
What should I do if the switch is unresponsive?
Check the circuit breaker and the LED indicator. If the LED is off, power may be missing. Try resetting the switch. If it still doesn't respond, contact a qualified technician.
Is the CLW-LSWEX-2GD ENERGY STAR certified?
While it is not specifically ENERGY STAR listed, it is designed to reduce standby power and meets UL and CE safety standards.
User questions about CLW-LSWEX-2GD Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual CLW-LSWEX-2GD - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CLW-LSWEX-2GD by Crestron.
USER MANUAL CLW-LSWEX-2GD Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : CLW-LSWEX-2GD
Category : Switch