TAL-3/8N2 - Drill Truper - Free user manual and instructions
Find the device manual for free TAL-3/8N2 Truper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Drill |
| Brand | Truper |
| Model | TAL-3/8N2 |
| Chuck Type | Keyed |
| Chuck Size | 3/8 inch (10 mm) |
| Power Source | Corded electric |
| Voltage | 120 V AC |
| Frequency | 60 Hz |
| Power Consumption | 450 W |
| No-Load Speed | 0–3000 RPM |
| Drilling Capacity (Wood) | 20 mm |
| Drilling Capacity (Steel) | 10 mm |
| Weight | 1.5 kg (approx) |
| Dimensions (L x W x H) | 25 x 20 x 8 cm |
| Cord Length | 2 m |
| Safety | Double insulated |
| Included Accessories | Auxiliary handle, depth gauge, chuck key |
| Maintenance | Keep air vents clean; replace carbon brushes when worn |
| Reparability | Spare parts available from authorized service centers |
| General Features | Variable speed trigger, lock-on button, reversible rotation |
Frequently Asked Questions - TAL-3/8N2 Truper
How do I change the drill bit?
To change the bit, use the chuck key to loosen the keyed chuck by turning it counterclockwise. Insert the new bit, then tighten clockwise until secure.
Can I use this drill for screwdriving?
Yes, the variable speed trigger allows precise control for driving screws. Use the reversible rotation to switch between forward and reverse for installing or removing screws.
How do I reverse the rotation?
Locate the direction switch above the trigger. Slide it to the left for forward rotation and to the right for reverse rotation. Always wait for the chuck to stop before changing direction.
How do I adjust the speed?
The speed is controlled by pressing the variable speed trigger lightly for low speed and more firmly for higher speed. The lock-on button can hold the trigger for continuous operation.
How do I maintain the drill?
Regularly clean the air vents to prevent dust buildup. Keep the chuck and gears lightly lubricated. Replace worn carbon brushes when you notice sparking or reduced power.
Is the drill double insulated?
Yes, the TAL-3/8N2 is double insulated for safety, meaning it does not require a ground connection. The insulated body protects against electric shock.
What safety precautions should I take?
Always wear safety goggles and work gloves. Keep the power cord away from sharp edges. Unplug the drill before changing bits or performing maintenance.
How do I install the auxiliary handle?
Fit the auxiliary handle around the collar and tighten the knob clockwise. Adjust the handle to a comfortable position for better control and to reduce torque reaction.
What is the maximum drilling capacity in wood and steel?
The maximum drilling capacity is 20 mm in wood and 10 mm in steel. Use appropriate twist bits for steel and spade bits for wood for best results.
How do I replace carbon brushes?
Unplug the drill, remove the brush caps on the motor housing, and lift out the old carbon brushes. Insert new brushes and replace the caps. Ensure the brushes are identical to the originals.
User questions about TAL-3/8N2 Truper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual TAL-3/8N2 - Truper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TAL-3/8N2 by Truper.
USER MANUAL TAL-3/8N2 Truper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Truper
Model : TAL-3/8N2
Category : Drill