PROVO-4 - Drill Truper - Free user manual and instructions

Product Type	Corded Drill
Model	PROVO-4
Brand	Truper
Power Supply	120V AC, 60Hz
Power Consumption	750 W
No-Load Speed	0-2500 RPM (variable)
Chuck Type	Keyless, 1/2 inch (13 mm)
Drilling Capacity (Steel)	1/2 inch (13 mm)
Drilling Capacity (Wood)	1 inch (25 mm)
Weight	3.5 lb (1.6 kg)
Dimensions (L x W x H)	10.6 x 7.9 x 3.9 inches (27 x 20 x 10 cm)
Main Functions	Drilling in wood, metal, plastic; screwdriving
Reverse Function	Yes, for removing screws
Speed Control	Variable speed trigger with lock-on
Handle Design	Ergonomic rubberized grip
Safety Features	Double insulated, lock-off switch
Maintenance	Clean vents regularly; replace brushes when worn
Spare Parts Availability	Brushes, chuck, power cord available from Truper
Repairability	Serviceable by qualified technician; user-replaceable brushes
Included Accessories	Depth stop rod, side handle, carrying case

Frequently Asked Questions - PROVO-4 Truper

How do I change the drill bit?

To change the bit, first ensure the drill is unplugged. Then rotate the chuck collar counterclockwise to open the jaws, insert the bit, and tighten by rotating clockwise. Use the keyless chuck for quick changes.

What is the maximum drilling capacity in concrete?

This drill is not designed for concrete. Use a hammer drill for masonry. For steel, it can drill up to 1/2 inch and wood up to 1 inch.

Can I use this drill for screwdriving?

Yes, the PROVO-4 has variable speed and reverse, making it suitable for driving screws. Use a screwdriver bit and set the speed low for better control.

How do I maintain the drill?

Keep the ventilation slots clean from dust. After heavy use, check the carbon brushes every 50 hours of operation. Replace them if worn to less than 1/4 inch.

What safety precautions should I take?

Always wear safety glasses and ear protection. Unplug the drill when changing bits or performing maintenance. Do not use in wet conditions. The double insulation protects against electric shock.

Why does the drill not turn on?

First, check if the power cord is plugged in and the outlet works. Ensure the trigger lock is disengaged. If the drill still does not work, the carbon brushes may be worn or the power cord damaged.

How do I use the depth stop rod?

Insert the depth stop rod into the side handle bracket and adjust to the desired depth. Tighten the locking screw. The rod will contact the surface to prevent drilling deeper.

Can I use the drill in reverse for removing screws?

Yes, slide the forward/reverse switch to the reverse position (marked R). The chuck will rotate counterclockwise to back out screws.

What is the warranty coverage?

Truper offers a 1-year limited warranty against defects in materials and workmanship. Keep your purchase receipt. The warranty does not cover wear items like brushes or chucks.

Where can I buy spare parts?

Spare parts like carbon brushes, chucks, and power cords are available through Truper authorized service centers or online retailers. Check the Truper website for a list of distributors.

USER MANUAL PROVO-4 Truper

Close-up of a black electrical test probe with two metal pins and a curved cable (no visible text or symbols)

Two identical black remote control knobs with numeric labels and indicator lights, no text or symbols present.