PIPI-440X - Paint sprayer Truper - Free user manual and instructions
Find the device manual for free PIPI-440X Truper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | HVLP Paint Sprayer |
| Brand | Truper |
| Model | PIPI-440X |
| Power | 440 W electric motor |
| Voltage | 120 V AC, 60 Hz |
| Container capacity | 1.6 L (0.42 gal) cup |
| Max flow rate | 0.3 L/min (0.08 gal/min) |
| Nozzle size | 1.7 mm (0.067 in) spray nozzle |
| Spray pattern | Adjustable horizontal, vertical, and round |
| Maximum viscosity | Suitable for paints with up to 60 DIN viscosity |
| Weight | 4.5 kg (9.9 lb) |
| Dimensions (L × W × H) | 35 cm × 25 cm × 20 cm (13.8 × 9.8 × 7.9 in) |
| Cord length | 2 m (6.6 ft) |
| Material | ABS housing, brass nozzle |
| Includes accessories | Spray gun, paint cup, spare nozzle, viscosity cup, cleaning brush |
| Cleaning | Disassemble and rinse with solvent after each use |
| Safety features | Lockable trigger and input fuse |
| Repairability | Spare parts available: nozzle, seal, filter, and cup |
| Recommended use | Water-based and oil-based paints, varnishes, and primers |
| Certifications | UL listed, ETL approved |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - PIPI-440X Truper
What types of paint can I use with the Truper PIPI-440X?
You can use water-based latex paints, oil-based paints, varnishes, and primers. Thin the material to the correct viscosity (around 25–60 DIN) for best results.
How do I thin the paint before spraying?
Check the paint's viscosity with the included viscosity cup. If it flows out too thick, add 5–10% water for latex paints or mineral spirits for oil-based paints, and stir thoroughly.
Why is the spray sputtering or uneven?
Sputtering usually results from blocked nozzle, air leak, or low fluid level. Clean the nozzle, ensure the cup is sealed, and keep the cup at least half full. Also check that the paint is properly thinned.
How do I clean the sprayer after use?
Disconnect the power, empty remaining paint, and disassemble the spray gun. Rinse the cup, nozzle, and filters with the appropriate solvent (water for latex, mineral spirits for oil-based). Use the included brush to remove dried paint.
Can I adjust the spray pattern?
Yes. Turn the pattern regulator to select horizontal, vertical, or round spray. Adjust the fluid control to set paint flow, and test on scrap material to achieve the desired finish.
What safety precautions should I follow?
Always use a respirator mask, safety goggles, and gloves. Work in a well-ventilated area. Keep away from open flames and unplug the unit before cleaning or maintenance.
Why doesn't the sprayer start?
Check the power cord and outlet. Verify the trigger lock is disengaged. Inspect the fuse on the unit; replace it if blown. If the problem persists, contact Truper service.
How do I store the sprayer for long periods?
After cleaning and drying, assemble the gun without fluid. Store in a cool, dry place out of reach of children. Avoid kinking the hose and keep the power cord loosely coiled.
Can I spray thick materials like exterior paint?
Yes, if you thin the paint to the recommended viscosity. For heavily textured materials, consider a larger nozzle (not included). Test the spray pattern first to avoid clogging.
Where can I buy spare parts for the PIPI-440X?
Genuine spare parts like nozzles, filters, and cups are available at authorized Truper distributors and online stores. Always quote the model number when ordering.
User questions about PIPI-440X Truper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint sprayer in PDF format for free! Find your manual PIPI-440X - Truper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PIPI-440X by Truper.