DTROM-37 - Screwdriver Truper - Free user manual and instructions
Find the device manual for free DTROM-37 Truper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Screwdriver |
| Brand | Truper |
| Model | DTROM-37 |
| Power Source | Rechargeable battery |
| Battery Voltage | 3.6 V |
| Charging Time | 3-5 hours |
| No-Load Speed | 250 rpm |
| Maximum Torque | 5 Nm |
| Chuck Type | 0.25-inch hexagonal |
| Bit Holder | Magnetic |
| Rotation Function | Forward and reverse |
| Integrated LED Light | Yes |
| Handle Design | Ergonomic, soft grip |
| Safety Features | Overload protection, switch lock |
| Maintenance | Wipe with dry cloth; keep free of dust |
| Spare Parts | Available from Truper service centers |
| Weight | 0.5 kg |
| Dimensions | 20 x 15 x 5 cm |
| Included in Box | Screwdriver, battery, charger, bit set |
Frequently Asked Questions - DTROM-37 Truper
How do I change the bit on the Truper DTROM-37 screwdriver?
To change the bit, pull the chuck forward or press the release button (depending on design), remove the current bit, and insert a new 1/4-inch hex bit until it clicks securely. The magnetic bit holder keeps bits in place.
How do I charge the DTROM-37?
Connect the included charger to the screwdriver's charging port and plug it into an outlet. The charging time is typically 3 to 5 hours. The LED indicator may show red while charging and turn green when full.
How long does the battery last on a full charge?
Battery life depends on usage, but under normal screwdriving tasks, a full charge can typically drive 30 to 50 screws into softwood. The integrated battery indicator helps monitor power.
Can I use the DTROM-37 to drill holes?
This tool is designed for screwdriving, not heavy drilling. It can handle small pilot holes in soft materials, but for drilling wood or metal, use a dedicated drill.
How do I set the rotation direction?
Use the forward/reverse switch located above the trigger. Slide it to the left for clockwise rotation (tightening) and to the right for counter-clockwise (loosening).
What type of bits does the DTROM-37 accept?
It accepts standard 1/4-inch (6.35 mm) hex bits, including Phillips, flathead, Torx, and hex drivers. Make sure the bit is securely locked in the chuck.
Is there a safety lock feature?
Yes, the screwdriver has a switch lock that disables the trigger, preventing accidental startup. Always engage it when not in use or during bit changes.
How should I maintain my Truper screwdriver?
Keep the tool clean and dry. Wipe the exterior with a soft cloth after use, and remove dust from the chuck and vents. Avoid using solvents or immersing in water. Check the battery terminals occasionally.
Can I purchase spare parts for this model?
Yes, Truper offers replacement batteries, bits, and chargers through authorized service centers. Contact Truper customer service for availability and part numbers.
What should I do if the screwdriver stops working?
First, ensure the battery is charged. If it still fails, check the overload protection – let the tool cool down. If the problem persists, contact Truper support for repair or replacement.
User questions about DTROM-37 Truper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual DTROM-37 - Truper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DTROM-37 by Truper.
USER MANUAL DTROM-37 Truper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Truper
Model : DTROM-37
Category : Screwdriver