LIOR-1/2NX - Sander Truper - Free user manual and instructions
Find the device manual for free LIOR-1/2NX Truper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Truper |
| Model | LIOR-1/2NX |
| Product Type | Orbital Sander |
| Power Supply | 120V AC, 60Hz |
| Motor Power | 350 W (approx. 1/2 HP) |
| No-Load Speed | 12,000 orbits per minute |
| Orbit Diameter | 1/2 inch (12.7 mm) |
| Pad Size | 1/2 sheet sandpaper (114 x 140 mm) |
| Dust Collection | Dust bag included |
| Weight | 1.6 kg (3.5 lbs) |
| Dimensions (LxWxH) | 245 x 115 x 145 mm |
| Cord Length | 2 meters |
| Vibration Level | 8.5 m/s² |
| Sound Level | 82 dB(A) |
| Main Features | Variable speed control, soft grip handle, dust-sealed switch |
| Maintenance | Clean after each use; replace sandpaper when worn |
| Safety | Use safety glasses and dust mask; disconnect before service |
| Repairability | Spare brushes and sandpaper available; replaceable power cord |
| Included Accessories | Dust bag, sandpaper sheets, wrench |
| General Information | Compact design for light to medium duty sanding |
Frequently Asked Questions - LIOR-1/2NX Truper
How do I change the sandpaper on my Truper LIOR-1/2NX sander?
Make sure the sander is unplugged. Remove the used sandpaper by peeling it off or releasing the clamp. Align the new sandpaper with the pad and press firmly. The LIOR-1/2NX uses a hook-and-loop or clamping system depending on the version. Check your manual for specifics.
What is the recommended sandpaper size?
The LIOR-1/2NX uses 1/2 sheet sandpaper, measuring approximately 114 x 140 mm. Always cut or punch holes to match the pad dust holes for efficient collection.
How do I connect the dust bag?
The dust bag attaches to the dust port on the rear or side of the sander. Push the connector firmly until it clicks. Empty the bag when it's about half full to maintain suction.
How do I adjust the speed?
The LIOR-1/2NX is equipped with a variable speed dial. Rotate it to increase or decrease the orbits per minute (OPM). Use lower speeds for fine sanding and higher speeds for heavy stock removal.
Can I use the sander for polishing?
Yes, with the appropriate polishing pad and accessories. However, the LIOR-1/2NX is primarily designed for sanding. For polishing, reduce the speed to avoid damaging the surface.
What safety precautions should I take?
Always wear safety goggles and a dust mask. Do not wear loose clothing or jewelry. Keep hands away from the moving pad. Unplug the sander before changing sandpaper or performing maintenance.
Why is the sander not starting?
Check if it's plugged in and the outlet works. Inspect the power cord for damage. If the sander still doesn't start, the brushes might need replacement. Contact a qualified technician.
How do I clean the sander after use?
Unplug the sander and wipe the body with a dry cloth. Use compressed air to blow dust from the vents and the pad area. Never use water or solvents.
What kind of maintenance does the motor require?
Regularly check the carbon brushes. If they are worn beyond 8 mm, replace them with genuine Truper parts. Also ensure the armature is clean and free of debris.
Where can I find spare parts?
Spare parts like carbon brushes, sandpaper, and dust bags are available at authorized Truper distributors. You can also check the manual for a parts list and contact Truper customer service directly.
User questions about LIOR-1/2NX Truper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual LIOR-1/2NX - Truper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LIOR-1/2NX by Truper.
USER MANUAL LIOR-1/2NX Truper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Truper
Model : LIOR-1/2NX
Category : Sander