SBN600 - Drill Luxor - Free user manual and instructions
Find the device manual for free SBN600 Luxor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Corded percussion drill |
| Brand | Luxor |
| Model | SBN600 |
| Motor power | 600 W |
| Power supply | 230 V AC, 50 Hz |
| No-load speed | 0 - 3000 rpm |
| Impact rate | 0 - 48000 bpm |
| Chuck type | 13 mm keyed chuck |
| Drilling capacity - wood | 30 mm |
| Drilling capacity - steel | 13 mm |
| Drilling capacity - concrete | 20 mm |
| Speed control | Variable-speed trigger with lock-on |
| Rotation direction | Forward/reverse selector |
| Cable length | 2.5 m |
| Weight | 1.8 kg |
| Dimensions (L x W x H) | 300 x 210 x 90 mm |
| Safety rating | Class II double insulated |
| Included accessories | Auxiliary handle, depth stop, chuck key |
| Maintenance and cleaning | Unplug and wipe with a dry cloth; keep air vents clean |
| Spare parts and repairability | Carbon brushes, chuck, switch and power cable available |
| Sound power level | 96 dB(A) |
| Vibration level | 8.5 m/s² |
Frequently Asked Questions - SBN600 Luxor
What type of drill is the Luxor SBN600?
The Luxor SBN600 is a corded percussion drill with a 600 W motor. It is designed for drilling into wood, metal and masonry, and also supports hammer drilling in concrete.
How do I install or change a drill bit on the SBN600?
Insert the chuck key into the side holes of the chuck, turn it counterclockwise to open the jaws, remove the old bit, insert the new bit, then tighten all three holes clockwise to secure it.
Can the SBN600 drill into concrete or brick?
Yes, use the percussion/hammer mode. Slide the selector to the hammer position, keep the bit perpendicular to the surface and apply moderate pressure. Use a masonry bit rated for hammer drilling.
How can I reverse the rotation direction?
Wait until the motor has completely stopped, then push the forward/reverse switch to the right for clockwise rotation or to the left for counterclockwise rotation. Do not change direction while the spindle is turning.
How should I clean and maintain the Luxor SBN600?
Unplug the drill before any maintenance. Wipe the housing with a dry cloth, keep ventilation slots free from dust, and occasionally check carbon brushes and chuck tightness. Do not use water or solvent based cleaners.
What safety equipment should I use with this drill?
Always wear safety goggles, ear protection and non-slip gloves. Use the auxiliary handle for better control and never hold the workpiece by hand when drilling.
How do I replace the carbon brushes on the SBN600?
When you notice sparking or loss of power, replace the carbon brushes. Unscrew the brush holder caps, remove worn brushes, insert new ones identical to the originals, and tighten the caps. Run the drill for about 10 minutes to seat the brushes.
What is the maximum drilling capacity of the SBN600?
With the correct drill bit, the maximum capacity is 30 mm in wood, 13 mm in steel and 20 mm in concrete using the hammer mode.
Does this drill have a variable speed trigger?
Yes, the on/off trigger is variable speed: pressing it lightly starts slowly and deeper pressing increases speed. A lock-on button near the trigger allows continuous running without holding the trigger.
Is the Luxor SBN600 double insulated and do I need a grounded outlet?
Yes, it is class II double insulated. This means an earthed socket is not required, but the plug and socket must be correctly rated for 230 V ~ 50 Hz.
User questions about SBN600 Luxor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual SBN600 - Luxor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBN600 by Luxor.
USER MANUAL SBN600 Luxor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Luxor
Model : SBN600
Category : Drill