SSG450 - Saw Luxor - Free user manual and instructions
Find the device manual for free SSG450 Luxor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Saw |
| Brand | Luxor |
| Model | SSG450 |
| Power Consumption | 1800 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Blade Diameter | 450 mm (18") |
| No-Load Speed | 3500 rpm |
| Cutting Depth at 90° | 130 mm |
| Cutting Depth at 45° | 95 mm |
| Weight | 25 kg |
| Dimensions (L x W x H) | 600 x 500 x 400 mm |
| Main Functions | Cutting wood, plastic, and metal (with appropriate blade) |
| Safety Features | Blade guard, safety switch, anti-kickback pawls |
| Maintenance | Clean blade, lubricate moving parts, check alignment regularly |
| Spare Parts Availability | Available through authorized service centers |
| Intended Use | Professional and DIY woodworking |
Frequently Asked Questions - SSG450 Luxor
How do I install the blade on the Luxor SSG450 saw?
Ensure the saw is unplugged. Loosen the arbor nut using the wrench provided, remove the old blade, align the new blade with the correct rotation direction, and tighten the nut securely. Always refer to the manual for torque specifications.
What safety precautions should I take when using the saw?
Always wear safety goggles and hearing protection. Keep hands away from the blade path. Use the blade guard and anti-kickback pawls. Never operate without proper guards in place.
How do I adjust the cutting depth?
Loosen the depth adjustment lever, raise or lower the saw blade to the desired depth, and tighten the lever. Check by making a test cut on scrap material.
What materials can I cut with this saw?
The Luxor SSG450 can cut wood, plastics, and non-ferrous metals when using the correct blade. Always use a blade rated for the material you intend to cut.
Why does the saw vibrate excessively?
Excessive vibration may be due to an unbalanced blade, loose bolts, or worn bearings. Check the blade for damage, tighten all fasteners, and inspect bearings. If problem persists, contact service.
How often should I clean and lubricate the saw?
Clean the saw after each use to remove sawdust and debris. Lubricate moving parts such as the arbor shaft and tilt mechanism according to the maintenance schedule in the manual (typically every 20 hours of use).
Can I use this saw for rip cuts?
Yes, the SSG450 can perform rip cuts. Use a rip fence for accuracy and ensure the blade is suitable for ripping. Always feed the material against the rotation of the blade.
What is the maximum cutting width for crosscuts?
At 90°, the maximum cutting width is approximately 450 mm. For bevel cuts at 45°, the width reduces to about 360 mm. Use a sliding table if available for wider panels.
Where can I purchase replacement parts?
Replacement parts are available from authorized Luxor dealers or service centers. Visit the Luxor website for a list of distributors in your region.
How do I replace the power cord?
If the power cord is damaged, it must be replaced by a qualified technician to avoid hazards. Contact Luxor customer service or an authorized repair center.
User questions about SSG450 Luxor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual SSG450 - Luxor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SSG450 by Luxor.
USER MANUAL SSG450 Luxor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Luxor
Model : SSG450
Category : Saw