AU-2X35 - Computer accessory Sabrent - Free user manual and instructions
Find the device manual for free AU-2X35 Sabrent in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | USB 3.0 to SATA/IDE Hard Drive Adapter |
| Brand | Sabrent |
| Model | AU-2X35 |
| Interface | USB 3.0 (backward compatible with USB 2.0/1.1) |
| Supported Drive Types | SATA and IDE (PATA) hard drives and SSDs |
| Drive Size Compatibility | 2.5-inch and 3.5-inch drives |
| Data Transfer Rate | Up to 5 Gbps with USB 3.0, backward compatible with 480 Mbps USB 2.0 |
| SATA Compatibility | SATA I (1.5 Gbps), SATA II (3 Gbps), SATA III (6 Gbps) |
| IDE Compatibility | Ultra ATA 66/100/133 (PATA) |
| Power Supply | 12V / 2A AC power adapter included |
| Plug and Play | Yes, no drivers required for Windows, macOS, and Linux |
| Hot-Swap Support | Supports hot swapping for convenient drive changes |
| LED Indicators | Power (red) and activity (green/blue) LEDs |
| Operating Systems | Windows XP/Vista/7/8/10/11, macOS, Linux |
| Dimensions | Approximately 100 x 50 x 25 mm (adapter unit) |
| Weight | Approximately 200 g (adapter only) |
| Color | Black |
| Material | Plastic (ABS) casing |
| Main Functions | Connect 2.5-inch or 3.5-inch SATA/IDE drives to a laptop or desktop via USB |
| Care and Cleaning | Disconnect the device before cleaning; wipe with a soft, dry cloth |
| Safety Features | Over-current protection; use only the included 12V power adapter |
| Repairability | No user-serviceable components; contact Sabrent customer service for any repairs |
| Included Accessories | USB 3.0 cable, SATA cable, IDE cable, 12V power adapter, user manual |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - AU-2X35 Sabrent
How do I connect a 3.5-inch SATA drive to my computer?
Connect the included SATA cable to the hard drive and to the adapter's SATA port. Then attach the 12V power adapter to the adapter's DC input and plug it into a wall outlet. Finally, connect the adapter to your computer using the USB 3.0 cable. The drive should power on and appear as an external drive.
Does the AU-2X35 support both SATA and IDE drives at the same time?
No, the AU-2X35 supports either a SATA or an IDE drive at any given time. You cannot connect both simultaneously. Simply select the appropriate cable and port when connecting your drive.
Can I use this adapter with a 2.5-inch laptop drive without external power?
Yes, 2.5-inch drives generally draw less power and can be powered directly through the USB port (on USB 3.0 ports). However, if your USB port provides insufficient current, you can still use the included 12V power adapter to ensure stable operation.
Why is my hard drive not detected by my computer?
First, confirm the drive is properly connected and powered. Check the LED indicators to see if the adapter has power. If using a 3.5-inch drive, make sure the power adapter is plugged in. If the drive still isn't detected, try a different USB port or cable. Also, verify the drive is initialized and has a partition in Disk Management (Windows) or Disk Utility (macOS).
Is the AU-2X35 compatible with USB-C ports?
The USB 3.0 Type-A connector can be used with USB-C ports using a USB-C to USB-A adapter or a cable with a Type-C connector. However, the adapter itself is USB 3.0, so the transfer speed will remain at up to 5 Gbps.
Can I swap drives without turning off the adapter?
Yes, the AU-2X35 supports hot swapping. You can safely disconnect and connect new SATA or IDE drives while the adapter is powered on. Always eject or safely remove the drive from your operating system before unplugging to prevent data corruption.
What is the maximum hard drive capacity supported?
The adapter supports drives with capacities up to 10TB or higher, depending on the file system and operating system. For SATA III drives, the USB 3.0 interface handles the full throughput. There is no specific capacity limit imposed by the adapter.
Does this adapter work with solid-state drives (SSDs)?
Yes, both 2.5-inch and 3.5-inch SATA SSDs work perfectly with the AU-2X35. SSDs take advantage of USB 3.0 speeds for fast data transfer and can be used for cloning or enlisting as external storage.
What should I do if the power LED is not lighting up?
First, check that the power adapter is correctly connected to the adapter and a working wall socket. Try a different power outlet. If the LED still doesn't light, the power adapter may be faulty. Contact Sabrent support for a replacement.
Can I use the AU-2X35 to recover data from an old IDE hard drive?
Absolutely. The adapter includes a dedicated IDE port and cable for connecting old PATA drives. When using a 3.5-inch IDE drive, you must use the 12V power adapter. For 2.5-inch IDE drives, USB power may be sufficient. Once connected, your computer will recognize the drive as an ordinary external device, allowing you to recover your files.
User questions about AU-2X35 Sabrent
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Computer accessory in PDF format for free! Find your manual AU-2X35 - Sabrent and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AU-2X35 by Sabrent.
USER MANUAL AU-2X35 Sabrent
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sabrent
Model : AU-2X35
Category : Computer accessory