FBGHD 800 PT X - Range hood Fulgor Milano - Free user manual and instructions
Find the device manual for free FBGHD 800 PT X Fulgor Milano in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Fulgor Milano |
| Model | FBGHD 800 PT X |
| Product Type | Built-in range hood |
| Width | 800 mm |
| Depth | 500 mm |
| Height (adjustable) | 300 to 430 mm |
| Net Weight | 22 kg |
| Electrical Supply | 220-240 V, 50 Hz |
| Motor Power | 260 W |
| Total Power Consumption | 270 W (including LED lighting) |
| Maximum Airflow | 800 m³/h (boost mode) |
| Number of Speeds | 4 (including boost) |
| Control Type | Electronic touch panel |
| Lighting | 2 x 3 W LED |
| Filter Type | Dishwasher-safe aluminium mesh |
| Installation Type | Under-cabinet or wall-mounted |
| Noise Level | 45 to 62 dB(A) |
| Energy Efficiency Class | A+ |
| Maintenance | Regularly clean grease filters; replace carbon filters if recirculating |
| Safety Features | Thermal cut-off, automatic off, touch-safe controls |
| Spare Parts | Filters, LED lamps and electronic board available |
| Minimum Distance to Gas Hob | 650 mm |
| Minimum Distance to Electric Hob | 500 mm |
Frequently Asked Questions - FBGHD 800 PT X Fulgor Milano
How often should I clean the grease filters?
We recommend cleaning the aluminium grease filters every 3 months, or more frequently if you cook heavily. Simply remove them and wash in a dishwasher or by hand with warm soapy water.
Can the hood operate in recirculation mode?
Yes, the hood can be used in recirculation mode if you install an optional carbon filter inside the unit. This is ideal when no external ducting is available.
What is the recommended installation height above the hob?
The minimum distance is 650 mm for gas hobs and 500 mm for electric or induction hobs. Always check local regulations before installation.
How do I replace the LED lamp?
The hood uses 2 x 3 W LED lamps. To replace them, disconnect the power supply, remove the filter, and carefully unclip the faulty lamp. Push the new lamp into place until it clicks.
Why does my hood have reduced airflow?
A common cause is a blocked grease filter or a kinked ducting. Clean the filters and check the ducting for obstructions. Also ensure the carbon filter (if used) is not saturated.
Can I wash the carbon filter?
No, carbon filters are not washable. They should be replaced every 3-6 months depending on usage to maintain effective odour absorption.
How do I activate the boost function?
Press the boost key on the touch panel while the hood is running. The motor will temporarily run at maximum speed and automatically revert to the previous speed after a few minutes.
What should I do if the touch controls are unresponsive?
Check that your hands are dry and that there is no grease residue on the control panel. If problems persist, reset the hood by switching off the mains for 10 seconds and turning it back on.
Is the hood difficult to install?
Installation can be done by a qualified technician. The hood comes with a template and hardware for wall or under-cabinet mounting. It's important to respect clearances and secure the unit properly.
Does the hood have a delayed shut-off?
Yes, after switching off the motor, you can activate the delayed shut-off feature (10-minute timer) by holding the "-" key for a few seconds. This vents remaining odours automatically.
User questions about FBGHD 800 PT X Fulgor Milano
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual FBGHD 800 PT X - Fulgor Milano and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FBGHD 800 PT X by Fulgor Milano.
USER MANUAL FBGHD 800 PT X Fulgor Milano
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fulgor Milano
Model : FBGHD 800 PT X
Category : Range hood